6

I have installed RetroPie in my B+, but when I play a game, the sound cracks. I have connect my speakers using 3,5 mm jack.

  • First, because of the nature of the jack(for video and audio out) I have learned that you have to put it in a certain way(you cant plug it in all the way). Also, speakers have impeadence values and will max out so check your volume. – NULL Jun 10 '15 at 19:15
  • This article talks about sound quality on the b+: crazy-audio.com/2014/07/sound-quality-of-the-raspberry-pi-b and suggests one of these hifiberry.com/dacplus after concluding the sound on the B+ was not that good. – NULL Jun 10 '15 at 19:22
  • @NULL If I plug my headphone into the Pi I don't have cracking sounds. And if I plug my speakers into another computer I don't have the cracking sounds. – wb9688 Jun 10 '15 at 20:08
  • The jack on the pi is different from that on your computer: the computer is only meant for headphones whereas the pi has more contacts so you have to stick it in farther or less possibly. Otherwise I am not sure. – NULL Jun 12 '15 at 14:16
4

There are three solutions for this:

Solution 1

Make sure your Pi is getting enough power. This is the most common problem with Raspberry Pi's, because they don't come with a standardized power supply. Just make sure you are using a thick and short cord, and not a thin and long one like phone charging cords.

Solution 2

Pulseaudio. Pulseaudio is a package for the RPi that significantly increases the quality of the audio. Follow this tutorial.

Solution 3

Buy an external USB sound card. This is what I do, just because I needed to record things and the RPi's audio jack is not capable of input. I use this card, it is very cheap at $3 and the quality exactly the same as the audio port on my Macbook.

  • While an older solution, worth mentioning that the OP mentioned running RetroPie. While Pulseaudio works great under Raspbian, in general, there are some reports of system hangs on RetroPie. I recently ran into freezing with Pulseaudio on an otherwise vanilla RetroPie image, twice. For anyone pursuing solution two on a RetroPie, who then experiences freezes, uninstalling Pulseaudio will get you back to even keel, most likely. – Joseph Ferris Mar 1 '17 at 4:11
0

If others are having this problem on a Raspberry Pi 1: Upgrade your firmware with rpi-update - see https://github.com/raspberrypi/linux/issues/128

That reduces the number of cracks to 1, on the first use.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.