I bought a HDMI / VGA Converter ... and a VGA to CGA Converter for 15Khz ... but now I want to plug in on my TV CRT ... but how to create a 5 PIN RGBs to SCART cable? Is there any schematics or something to help me to do this? When I use Composite output my playscreen is not fullscreen.


That sounds like the longest and most complex route to get the Pi to display via SCART. There is a much easier route: get a composite cable (if you have a Pi A/B) or a 3.5mm to Composite cable (if you have a Pi A+/B+/2B) and a composite to SCART adapter. Here is a post that shows how to use this (it's about installing Rasplex but ignore that part).

An example 3.5mm plug to composite cable is this one: http://www.amazon.com/Parts-Express-3-5mm-Plug-Cable/dp/B0007V6JCK

and an example composite-to-SCART adapter is this one: http://www.amazon.com/Scart-Composite-S-Video-Audio-Adapter/dp/B006RBMJ46

  • Ok thanks for your information but is output send 15Khz via this route or not ? That's the way I'm looking for to play Retro gaming ;) How do I set up my PI to output via Jack instead HDMI ? – Odissine Jul 3 '15 at 13:54
  • That also only works if the SCART TV/monitor has composite in. If it is RGB only, you will get no picture. – Prof. Falken Oct 3 '16 at 7:51

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.