4

I have the 7 Inch TFT Touch Screen LCD Monitor For Raspberry Pi + Driver Board HDMI VGA 2AV calibrated, but every time after the restart I have to calibrate it new.
Is there a way that he remembers it.
(Sorry for my bad english)

7

You need to store calibration data in /usr/share/X11/xorg.conf.d/99-calibration.conf which you got from xinput_calibrator.

Here, follow these steps.

  1. Use xinput_calibrator utility.
  2. copy the output, calibrator gave after calibration.
  3. sudo nano /usr/share/X11/xorg.conf.d/99-calibration.conf
  4. Paste the data
  5. ctrl + x, yes to save.
  6. sudo reboot to make it effective.

It should be done by now. :)

Hope it helps.

protected by goldilocks Apr 23 '16 at 17:02

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.