I have the 7 Inch TFT Touch Screen LCD Monitor For Raspberry Pi + Driver Board HDMI VGA 2AV calibrated, but every time after the restart I have to calibrate it new.
Is there a way that he remembers it.
(Sorry for my bad english)

1 Answer 1


You need to store calibration data in /usr/share/X11/xorg.conf.d/99-calibration.conf which you got from xinput_calibrator.

Here, follow these steps.

  1. Use xinput_calibrator utility.
  2. copy the output, calibrator gave after calibration.
  3. sudo nano /usr/share/X11/xorg.conf.d/99-calibration.conf
  4. Paste the data
  5. ctrl + x, yes to save.
  6. sudo reboot to make it effective.

It should be done by now. :)

Hope it helps.

Not the answer you're looking for? Browse other questions tagged or ask your own question.