I am currently using a Raspberry Pi2, and a corsair voyager air 2.

The Corsair device is a 1TB HD connected via USB3.0 cable, and comes with it's own battery power.

Plugging in the device, turning it off/on, switching USB ports.. nothing shows up. Could it be that I cannot run the Voyager Air 2 off battery when utilizing USB?? only with it's wifi connector? that sounds like a flaw.

all I see is my Wifi dongle,

$ lsusb Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]

  • 1
    You could have a look at dmesg | tail output before and after you plug it in to see if anything is indicated there. – goldilocks Jul 18 '15 at 19:23

The Voyager 2 must be turned on. Press the power switch until the battery light blinks. You should see "... ID 1b1c:1a08 Corsair" with lsusb. Also, the power light should be blue.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.