After updating the kernel in my Raspberry Pi B+, I moved the card/flash drive to my Pi 2. There are no kernel issues and I boot to the shell, but there is no network access whatsoever.
Inserted everything back into the B+, all is normal there. I thought there were no incompatibilities between the two models except for the v6 vs. v7 kernel? What could possibly be happening? (All packages are up to date)
This is the output of
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
And the contents of
# interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf wireless-power off