3

I have a case for my pi B+ that came with it, and I can't seem to make my pi 2 fit into it. The case is the one that comes with this kit. I'm only confused because I was made to undestand that the B+ and the Pi 2 were the same shape and cases would be interchangeable. Is this not the case?

My pi 2 was made in P.R.C and my pi B+ was made in the UK if that matters.

5

Interesting, I have the exact same case and it works. You just need to gently force the Pi in, it is a pain to get it in, and a pain to get it out also.

  • Ok. Because the B+ fits in smoothly, without forcing of any kind. I'll try this in the morning. – Luke Taylor Sep 3 '15 at 1:31
2

According to the Adafruit site "The basic form-factor of the Pi 2 Model B is nearly 100% the same as the Pi model B+ ...This means that 99% of cases designed for the Raspberry Pi Model B+ will work with the Raspberry Pi 2 Model B." You may just be in the 1%.

Having said that you may be able to clearance the case with some sanding etc. to get it to fit. But for under $10 you could pick up one of the new cases designed by the foundation. Without some good quality photos - it is impossible to tell just how much modification will be needed.

  • 2
    And if $10 is too much... We made our Pi cases out of business card boxes. We've bought 100's of them at the local printer for about $0.1 each. – EDP Sep 3 '15 at 4:53
  • I'm curious. Why 99%? – PNDA Apr 17 '16 at 13:58
  • 1
    @PandaLion98 There is a quote from Adafruit, but having worked as a mechanic for several years even mass produced parts have variations. coupled with that a design decision made for one model may become a bug in subsequent designs. – Steve Robillard Apr 17 '16 at 14:29

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.