1

I've seen articles describing how to disable LAN on the RPi 1 Model B. But it's not working on my RPi 2 Model B. According to Disable LAN9512 the command is supposed to be:
echo 0x0 > /sys/devices/platform/bcm2708_usb/buspower to disable it, but that doesn't work on my device as I don't have the bcm2708_usb part.

Here is an output of ls -l /sys/devices/platform/

pi@raspberrypi /sys/devices/platform $ ls -l
total 0
drwxr-xr-x  2 root root    0 Dec 10 02:08 alarmtimer

drwxr-xr-x  2 root root    0 Dec 10 02:08 bcm2835_AUD0.0
drwxr-xr-x  2 root root    0 Dec 10 02:08 bcm2835_AUD1.1
drwxr-xr-x  2 root root    0 Dec 10 02:08 bcm2835_AUD2.2
drwxr-xr-x  2 root root    0 Dec 10 02:08 bcm2835_AUD3.3
drwxr-xr-x  2 root root    0 Dec 10 02:08 bcm2835_AUD4.4
drwxr-xr-x  2 root root    0 Dec 10 02:08 bcm2835_AUD5.5
drwxr-xr-x  2 root root    0 Dec 10 02:08 bcm2835_AUD6.6
drwxr-xr-x  2 root root    0 Dec 10 02:08 bcm2835_AUD7.7
drwxr-xr-x  9 root root    0 Dec 10 02:08 clocks
drwxr-xr-x  2 root root    0 Dec 10 02:08 serial8250
drwxr-xr-x 16 root root    0 Dec 10 02:05 soc
drwxr-xr-x  2 root root    0 Dec 10 02:08 timer
-rw-r--r--  1 root root 4096 Dec 10 02:05 uevent 

I'm looking for a solution to disable the LAN because my aim is to turn off the chip that provides power to the LAN as I would like to run a test to utilise the cpu only and measure its power consumption.

9
  • 2
    What are you trying to gain by doing this? Dec 9, 2015 at 23:32
  • 2
    Need to be more specific. Note that the LAN9512 not only handles LAN but also USB. So while your title says to disable the whole chip (aka including USB) the text suggests that only the LAN should be disabled. (Adding to the obious why?).
    – Ghanima
    Dec 9, 2015 at 23:45
  • Thanks for the response. My aim is to turn off the chip that provides power to the LAN as I would like to run a test to utilise the cpu only and measure its power consumption. If turning off the LAN wud also turn off the USB, then so be it. But i need to turn it off. I note that there is a simple solution for older RPis (raspberrypi.stackexchange.com/questions/8498/disable-lan9512) but the path seems different in RPi 2.
    – ACG
    Dec 10, 2015 at 2:35
  • @ACG can you post the output of ls -l /sys/devices/platform/ then? I do have /sys/devices/platform/bcm2708_usb/buspower on my Pi 2. But I just executed echo 0x0 > /sys/devices/platform/bcm2708_usb/buspower and got an error. If you do too, then please add that info too to your question. Dec 10, 2015 at 3:08
  • 1
    @DiederikdeHaas If you are going to post formatting instructions you should read raspberrypi.stackexchange.com/editing-help
    – Milliways
    Dec 10, 2015 at 4:11

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.