I'm trying to get the 3.5"spotspear Waveshare display working following the guide, (can't have more than 2 links,the name of the guide is "I'd like to have some LCD on my Pi")
Problem is that when I'm using the modprobes the guide suggests
pi@raspberrypi ~ $ sudo modprobe flexfb nobacklight regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x00,0x00,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x36,0x28,-1,0x11,-1,0x29,-3 width=480 height=320 pi@raspberrypi ~ $ sudo modprobe fbtft_device name=flexfb speed=16000000 gpios=reset:25,dc:24
everything works, but as soon as I reboot the screen goes blank.
/etc/modules I've put both the commands.
There is no HDMI attached, I'm using
ssh to write to the console.
Update: This guide it's maybe easier to read,I've tried using the modules it suggests which don't seem that different,but still nothing.
I've also tried downloading and installing the spotspear drivers but upon reboot the screen is still white.
The modprobes from
ssh work fine,but the screen is still white after boot.