0

I'm planning on creating a "Magic Mirror". I have already got the UI running to my likings and my Pi-zero is on its way.

My concern is that having the mirror powered on 24/7, is not really eco-friendly. So I have also ordered a motion sensor to attach to the GPIO pins.

I wanted to wire in the monitor's power button to another set of pins but was thinking of HDMI-CEC should the monitor I will be using support this.

However, switching on a monitor at work made me realize that there is quite some delay when powering on the monitor. Is there some way to "slumber" the monitor so that it uses next to no power and is comparable to switching off the monitor while still switching on quickly?

4
  • Sounds extremely device specific and, I suspect, difficult to nail down. Wake time isn't something that comes up often in TV/monitor manuals. What monitor are you using?
    – goobering
    Commented Feb 24, 2016 at 12:18
  • I haven't decided on what monitor I would use to hack up, might look at something 2nd hand.
    – Havnar
    Commented Feb 24, 2016 at 12:21
  • Depending on your budget and the strictness of your requirement for a near-zero wake time, it might be easier to use a USB powered travel monitor and leave it running than it would be to try and persuade a standard monitor to wake faster. The exceedingly handsome example here uses an ASUS MB MB168B+, but AOC did a few USB powered panels a few years ago you might be able to find on the cheap.
    – goobering
    Commented Feb 24, 2016 at 12:28
  • That link gives me hope! Now I don't have need to hack up an expensive monitor, but I can use something old or some alternative! thanks @goobering ... Though I realize now that the Pi will not be able to power the monitor from USB
    – Havnar
    Commented Feb 24, 2016 at 15:42

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.