1

My current setup is mpd server on a RPi connected via pulseaudio to an airport express sink which in turn is connected to my receiver/amp as described in Redirect audio to another AirPlay device

In this setup I get choppy sound coming from the receiver. However, I have troubleshooted the problem to mpd because of the following:

1) It is not a pulseaudio + raop since running ffmpeg -i my-audio-file.mp3 -f pulse "my-sink.local" does play well through the receiver via airplay.

2) It is not an issue of connectivity of mpd since connecting to mpd either with mpc locally or a client from a different computer plays well when mpd is configured to use the alsa sink and a headset on the RPi.

I suppose it is some form of buffering on mpd that is conflicting with airplay/raop but I do not know where to look, any help will be appreciated.

1

As indicated in https://wiki.archlinux.org/index.php/PulseAudio/Troubleshooting

Use

load-module module-udev-detect tsched=0

in /etc/pulse/default.pa. This fixes the choppy audio

0

Spent some time trying to configure Airplay through Raop/PulseAudio on the new Raspberry Pi 3 using Raspbian Jessie with very little success. I would highly recommend forked-daapd:

This is a much updated version of the original forked-daapd 0.19, a Linux/FreeBSD DAAP (iTunes) media server with support for AirPlay devices, Apple Remote (and compatibles), MPD, Spotify, mp3 streaming and internet radio.

Install was very straightforward and I had the whole thing up and running in about 10 minutes. Here are the install instructions as detailed here:

1a. If you use Jessie then add this line to /etc/apt/sources.list:
deb http://www.gyfgafguf.dk/raspbian jessie/armhf/
or
1b. If you use Wheezy then add this line to /etc/apt/sources.list:
deb http://www.gyfgafguf.dk/raspbian wheezy-backports/armhf/
2. Run sudo apt-get update and then sudo apt-get install forked-daapd
3. Edit the config file /etc/forked-daapd.conf and (re)start the server with sudo /etc/init.d/forked-daapd restart

Optional - how to add support for Spotify:
1. Add deb http://apt.mopidy.com/ stable main contrib non-free to /etc/apt/sources.list
2. Run sudo apt-get update and then sudo apt-get install libspotify-dev
3. Restart forked-daapd and enter credentials as described in the instructions.
4. Check the log to see how it is working. It should start loading your playlists.
  • Your post has been flagged automatically as "duplicate answer". The thing with that is: if both questions are answerable by the exact same answer one of them should be closed as a dupe to the other. Unless of course your answer can be edited/changed/expanded to address an issue specific to this question. – Ghanima Jun 6 '16 at 21:27

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.