my raspberry pi has no internet access and I am trying to connect to it using putty's ssh feature.
how can I do it?
All you need is a wireless router, network switch, or a cross-over Ethernet cable I will give you the break-down of the router
- Hook-up via ethernet cables pi-to-router and pc-to-router (or via PC wireless connection to router).
- Find the "setting configure address" on a sticker on the router (should look like "http://192.168.X.XXX"); If not on sticker find with an easy command on cmd or terminal. On the PC, open a web browser and enter this Address.
- There should be a list of connect devices somewhere on this router page (May need additional details from sticker for logging into the router). Find where it says "raspberrypi" and use the ip address given to it in puttys "Host name" box.
- After hitting connect, there should be a certificate pop-up, select "ok". username is "pi" and password is usually "raspberry".
a cross-over ethernet cord is one where two wires are switched when compare to a traditional ethernet cord; rx and tx. Youcan easily make one and hook the pi straight up to your PC. You will have to make a bridge connection on your network settings. We use to do this with our Gaming Consoles back in the 00s.
if confuse, there are tons of videos on youtube on how to do All of these