I have to create simple device for a promotion campaign.

I should react when someone seats on the chair therefore I need advice on choosing the right sensor.

Should it be pressure sensor and what kind is better for Raspberry Pi?

I was suggested to use pressure switch at Electrical Engineering Stackexchange. Can someone give me some help on which switch to use and how to connect it?


You can use a force sensing resistor. If you look at the datasheet, there is a circuit for connecting the force sensing resistor as a threshold switch. You can design the circuit according to the example provided in the datasheet and set a threshold weight/load to trigger a signal. You can connect the output of the opamp to the Raspberry Pi. You must remember that the GPIO signals are at 3.3V level.

| improve this answer | |
  • So, if there are 100 chairs, so 100 sensor will be used, but how to integrate 100 sensors with pi, or for per sensor there will be 1 pi? – Gaurav Dave Feb 25 '16 at 11:15
  • There are I2C based GPIO expanders. You could connect all your sensors to the expander and interface it to the Pi via the I2C interface. – Sai Feb 25 '16 at 21:52

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.