I'm looking to power my Raspberry Pi via rechargeable batteries, but I would like to know how long can it run with x number of batteries. I want to eventually be able to mount it outside and solar charge the batteries and then have the Raspberry Pi run whenever there is enough juice.

2 Answers 2


Here's a writeup using six aa:



In general I'd say 4 AAs is cutting it close. If they're rechargeable, they're actually only 1.2 V which adds up to 4.8 V. That doesn't even make the recommended 5 V cut-off. You can technically get away with using only 3.3 V to power the Pi, but then you loose all peripherals. Like USB, ethernet, and HDMI. Not so useful in most situations. (The weather balloon people are having a field day with it though!)

Using alkaline batteries, you get 6 V which is enough to power the Pi. Nominally you'd expect around 4 hours power with them (given a 500 mA draw of the Pi and a 2000 mAh capacity of the battery), but there's a catch. Alkaline batteries have a very steep initial power drop. They go from 1.5 V to 1.2 V very quickly, and then remain around 1.2 V for most the rest of their charge, before dropping off again. Ever wonder why rechargeable batteries were ever only 1.2 V? That quirk of alkaline battery chemistry is why.

So you really do need at least 6 AA batteries, no matter what. 6 AA batteries gets you probably between 5 and 7 hours of life. 8 AA batteries 8 to 10. The MoPi board is a convenient mechanism for hooking up the AAs nicely, and also lets the Pi know when the batteries are low so that it shuts down nicely. It also accepts dual power inputs, so you could potentially feed solar power directly into the Pi, as well as charging the batteries.

  • Is that 5 and 7 hours running idle? Rememeber that the BCM has a GPU and a CPU, LAN and USB chip plus SD. If you load all those it will be more like an hour on 6 AA batteries, streaming HD video from the Camera module over Wifi and writting it to SD for redundancy. The Pi was not designed for battery power, especially such small ones. Plus these batteries have a parabolic discharge rate and at about 2.8volts which is 50~60% charge the Pi will cut out giving you 20 minutes.
    – Piotr Kula
    Mar 3, 2014 at 19:10
  • 7 hours idle or with light load. Realistically it's rare that you're doing everything at once. Any given one of those tasks is still only 50-100 mA. Because of the relatively high idle draw (minimum around 400 mA), draw under normal usage load isn't that much higher. I'd say it's unlikely to exceed 700 mA in most cases---this is the foundations recommended standard power supply. Even at ultra high loads of 1000 mA, I'd still guess we're looking at at least 2--3 hours. Some more testing by someone would be good to work out how much say, the GPU, really loads the system.
    – Fred
    Mar 3, 2014 at 21:19

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.