0

enter image description here

How do I set up the PiTFT Plus 3.5" touchscreen with a Raspberry Pi 2?

Improve this question
1
  • Please show how you have it connected, and if you've attempted to install any drivers. There is software that needs to be installed after the LCD is connected correctly (if you're not using their custom image... specify whether you're using that as well).
    – stevieb
    Jun 22, 2017 at 23:44

2 Answers 2

Reset to default
1

Download the ready-to-go image from here https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/easy-install , flash it on a card, boot it up, and you should be ... ready-to go.

Improve this answer
1
  • A result there is not yet loaded
    – user54059
    Sep 28, 2016 at 6:58
0

Here is a full how to but...

1) Expand filesystem using raspi config 2) Install new kernel:

curl -SLs https://apt.adafruit.com/add-pin | sudo bash
sudo apt-get install -y raspberrypi-bootloader adafruit-pitft-helper raspberrypi-kernel

3)Enable and configure pi-tft:

sudo adafruit-pitft-helper -t 35r

4) reboot

sudo reboot
Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.