When trying to plug in a USB webcam (Logitech QuickCam Pro 3000) to my Raspberry Pi, I'm getting some wonky errors:
[ 3.073211] usb 1-1.2: new full-speed USB device number 4 using dwc_otg [ 3.593168] usb 1-1.2: device not accepting address 4, error -32 [ 3.693183] usb 1-1.2: new full-speed USB device number 5 using dwc_otg [ 4.223146] usb 1-1.2: device not accepting address 5, error -32 [ 4.333124] usb 1-1.2: new full-speed USB device number 6 using dwc_otg [ 4.783152] usb 1-1.2: device not accepting address 6, error -32 [ 4.903162] usb 1-1.2: new full-speed USB device number 7 using dwc_otg [ 5.363167] usb 1-1.2: device not accepting address 7, error -32 [ 5.388312] usb 1-1-port2: unable to enumerate USB device
Everything works great when I plug it into my Linux laptop:
[ 7730.081964] usb 3-3: new full-speed USB device number 2 using ohci-pci [ 7730.308214] usb 3-3: New USB device found, idVendor=046d, idProduct=08b0 [ 7730.308227] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7730.408153] pwc: Logitech QuickCam Pro 3000 USB webcam detected. [ 7730.779493] pwc: Registered as video1. [ 7730.779684] input: PWC snapshot button as /devices/pci0000:00/0000:00:12.0/usb3/3-3/input/input14 [ 7730.783717] usbcore: registered new interface driver Philips webcam [ 7730.918441] usbcore: registered new interface driver snd-usb-audio
The Pi should be fully upgraded, and is hooked up to a 2A USB charger.
$ uname -a Linux raspberry01 4.1.19+ #858 Tue Mar 15 15:52:03 GMT 2016 armv6l GNU/Linux
Also tried upgrading the kernel manually, same problem:
$ uname -a Linux raspberry01 4.4.31+ #922 Mon Nov 14 15:31:57 GMT 2016 armv6l GNU/Linux
The port works, I tried it with a USB keyboard earlier and also swapped the camera and the WiFi dongle around. So, how can I go about getting my Pi to accept this 10+ years old camera?