-1

No.1 - I have one rasperry pi 3 where hyperion (ambilight) is running.

No.2 - And one rasperry pi 3 where I have an IR transmitter (with lirc) for sending commands to the tv.

I need to have both functions on one raspberry. I tried to let the the IR transmiter to run on raspberry #1, but I dont know how to set the dtoverlay.

rasp #1 (hyperion) dtoverlay is set to wg1-gpio. Used pins: 9, 19, 23

rasp #2 (lirc) dtoverlay is set to lirc-rpi. Used pins: 17, 11, 6

How do I have to set the dtoverlay? (I tried lirc-rpi and wg1-gpio already)

TIA

6
  • I have two dtoverlay statements in my config.txt. gpios statements follow each dtoverlay.
    – PaulF8080
    Mar 3 '17 at 4:37
  • so I can set it like this? dtoverlay=wg1-gpio,lirc-rpi .. I will try it. Thank you! Mar 3 '17 at 7:49
  • Hi @PaulF8080, I tried with dtoverlay=wg1-gpio,lirc-rpi but now I get following error. Lirc0 will not be found pi@raspberrypi:~ $ mode2 -d /dev/lirc0 mode2: could not get file information for /dev/lirc0 mode2: default_init(): No such file or directory Mar 3 '17 at 9:55
  • I don't see two dtoverlay lines.
    – PaulF8080
    Mar 3 '17 at 11:11
  • It worked know with only dtoverlay=lirc-rpi and I dont know why. But it works :) Mar 3 '17 at 11:26
0

It worked now with only dtoverlay=lirc-rpi and I dont know why. But it works :)

1
  • Can you please accept your answer so it is closed and will not be bumped again to the homepage?
    – Ingo
    Dec 17 '18 at 10:16

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.