2

This question already has an answer here:

When I plug everything into my pi3 and turn it on the lights on the board come on, but it never shows up on the screen. I believe this is because I have corrupted the sd card. I have tried to plug it into a windows machine, and it wont read from it until I reformat it. I tried to reformat it with the windows reformater and it won't work. I also tried to reformat it with the SD association reformater and it still won't work reformat. Does anyone know how I can wipe everything on the card and make it connect to windows so I can put NOOBS on it?

marked as duplicate by Jacobm001 Apr 3 '17 at 3:33

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

  • 1
    Here is the official guide on how to install NOOBS – Theoremiser Apr 1 '17 at 6:25
  • 1
    How do you know it is the card and not the screen or cable? – Steve Robillard Apr 1 '17 at 6:35
1

Here is a simple way to reformat your SD card: (Full guide from RPi's official website: https://www.raspberrypi.org/documentation/installation/sdxc_formatting.md)

Here's an overview:

Install SD formatter: https://www.sdcard.org/downloads/formatter_4/

And FAT32 Format: http://www.ridgecrop.demon.co.uk/guiformat.htm

Next,

Run the SD Formatter tool first with "FORMAT SIZE ADJUSTMENT" set to "ON", to ensure that any other partitions on the SD card are deleted. Then run the FAT32 Format (guiformat.exe) tool, ensure you choose the correct drive letter, leave the other options at their default settings, and click "Start".

If you need help reinstalling NOOBS, click here: https://www.raspberrypi.org/documentation/installation/noobs.md

0

You probably need to clean, and re-create the primary partition on the card.

Full instructions for using windows built-in diskpart tool here.

After executing create partition primary your SD card should reappear in your file browser and you will be able to format it with the windows formatter again.

If the clean command fails, just retry it until it works. It sometimes cannot clean on the first go, for whatever reason. Usually doesn't take more than 2 or 3 attempts and it's a very quick process once you have done it a couple of times.

Not the answer you're looking for? Browse other questions tagged or ask your own question.