1

Can I power a Pi Zero W and still use the usb hub at the sametime with this?

enter image description here

1

I can't answer your question directly, as I don't have that particular OTG cable. However, I do have a usb hub connected to my Pi Zero W USB data port, and the power from the hub is powering the Zero W as well as a few peripherals including a keyboard and a mouse with LED's onboard. No sweat.

You should be good to go.

  • 1
    Awesome thank you that's exactly what I need to know. It is able to power and send and receive data, I just didn't know if you could power a zero through the usb port as an alternative – kyran bullard May 6 '17 at 17:51
2

The Pi Zero W has two micro USB ports:

  • Micro USB On-The-Go, labeled "USB" - this is where the hub is connected
  • Micro USB power, labeled "PWR" - this is where the power supply for the Pi is connected

In other words: yes, you can do both things at the same time. This is exactly what both ports are for.

Addendum:

From the schematics of the Pi Zero, and assuming that the Pi Zero W is similar in this respect, we find that the USB On-The-Go port's power line is connected to VBUS whereas the power port is connected to 5V. Unfortunately the schematics do not mention VBUS again at any other point.

However connecting the power supply to the data port does indeed power the Pi. This answer supports that the Zero (again assuming the Zero W behaves the same way, which is likely) can be backpowered.

The final question now is whether the shown OTG hub powers the power line on its upstream port - which I cannot tell from the picture. If it is self powered (not bus powered) it is quite likely that it will work (with any drawbacks that may arise from backpowering). Make sure that the power supply's amperage covers the Pi and the connected peripherals.

  • I'm asking if I can power it through the usb socket and not the power socket – kyran bullard Apr 30 '17 at 8:10
  • Well, that is not what your question reads. – Ghanima Apr 30 '17 at 8:12
  • Related: (assuming the Zero W is similar to the Zero in this) raspberrypi.stackexchange.com/q/38642/19949 – Ghanima Apr 30 '17 at 8:15
  • Actually it asks if I can power a pi zero with that device depicted above, I guess I should have specified that it would be plugged in the usb port – kyran bullard Apr 30 '17 at 8:16
  • @kyranbullard is the hub self powered? If not where do you intend to connect to power supply? – Ghanima Apr 30 '17 at 8:28

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.