I want to order an IMU like this : https://www.raspberrypi.org/blog/real-time-orientation-display-with-the-minimu-9-v2/, and mount it on the mainboard so that fits mecahnically and is stable. I found a way using AdaFruit GPS ( https://www.adafruit.com/product/2324 ) and sticking the IMU inside the holes and connecting them to the various pins ( Vdd, SDA , SCL etc. ) However I do not want any GPS.

Is there any other solution? What is HAT by the way in Adafruit?

EDIT, after some downvotes ( misunderstanding maybe ) for my answer: Is there any solution, wherein there is any alternative to Pololu and which fits mechanically on the Raspberry Pi.

  • 1
    I'm not convinced this is a Pi specific question. You want to know how to mechanically mount one object to another object which is a fairly generic question. I suspect that any answer given will be dismissed as not quite perfect for your situation. Does the Pi have a mounting hole? Does the IMU have a mounting hole? Why not use them? – joan May 2 '17 at 9:36
  • @joan : i have written in my question the specific objects. I dont know how did you come to a conclusion that I want to fit any object to any object !? I have already found the answer .. See my answer below . – infoclogged May 2 '17 at 9:50
  • @joan I think the Pi's mechanical properties should probably be given equivalent weight to its electrical properties - mounting hole arrangements can be significant for some applications (although you can velcro your way out of just about anything). – goobering May 2 '17 at 14:06

My initial guess would be to duct tape it to the back. I can't find any imu hats.

And a HAT is something you can put on your pi, so it stays like this.this

| improve this answer | |

An alternative to Pololu is Sense-HAT

Luckily Sense-HAT has all the sensors that the Pololu-IMU has and also mechanically fits perfectly on the controller.

Hence, the Sense-HAT could be a good replacement to the IMU Sensors from Polulu MinIMU-9 v3.

enter image description here

| improve this answer | |
  • 2
    While I'm pleased that you found an alternative approach to your issue, this is very much not the answer to the question 'How do I attach a Pololu MinIMU-9 v2 to a Raspberry Pi?'. If you plan on answering your own question there has to be some amount of logical consistency between Q & A. We do not play 'What's in my pocket?' here. – goobering May 2 '17 at 14:01
  • @goobering : huh.. i wrote the question because i didnt know about this board at all. As I wrote in my answer, that its an alternative and alternatives are also answers ! Atleast I am sure, the answer would benefit one or the another someday.. So kindly stop accusing with "Whats in my pocket" and avoid the unnecessary pain of downvotes.. – infoclogged May 3 '17 at 15:30
  • @infoclogged: It still doesn't answer the question you proposed, at all. – Jacobm001 May 4 '17 at 19:57
  • @Jacobm001 : I have asked for alternative solutions.. Just not for mechanically mounting, but also for if there is any alternative solution to achieve my goal - and the goal was to get IMU data from raspberry. Read the question properly dude, that I wanted a HAT which does not have a GPS..So, avoid the pain of downvoting unnecessarily. – infoclogged May 5 '17 at 10:30

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.