0

Ok, I'm new to StackExchange but I have the same Problem others seem to have, too. I picked up the answers I found so far. What I see on my system is, that I have TWO eGalaxy devices. They are listed as follows:

I: Bus=0003 Vendor=0eef Product=0001 Version=0112
N: Name="eGalax Inc. Touch"
P: Phys=usb-3f980000.usb-1.5/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0EEF:0001.0004/input/input0
U: Uniq=
H: Handlers=mouse0 js0 event0
B: PROP=0
B: EV=1b
B: KEY=30000 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10

I: Bus=0003 Vendor=0eef Product=0001 Version=0112
N: Name="eGalax Inc. Touch"
P: Phys=usb-3f980000.usb-1.5/input0
S: Sysfs=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0EEF:0001.0004/input/input1
U: Uniq=
H: Handlers=mouse1 event1
B: PROP=0
B: EV=1b
B: KEY=401 0 0 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10

When I do evtest input0 does nothing at all, input1 reacts as it should, as far as I can see with evtest. The only differences I see is in "Handler" the js0 for input0, also "Key"=3000 ... in input0 as opposed to "Key"=401 ... in input1. Is there a way to disable input0? I did a complete fresh install of the latest Rasbian Jessie versin (2017-06-21), no additional Drivers.

Thanks Karl

  • Drivers in /sys often have a "bind" and an "unbind" entry that you can use to remove endpoints (not sure in this specific case). Does "echo input0 > .../input" do anything? – BJ Black Jun 25 '17 at 19:06
  • Thanks for your answer! When I look into /sys, I see as the closest to what you say this: – kfeger Jun 26 '17 at 20:56
  • /sys/class/Input: [very Long Name]input0 [very Long Name]event0 Can I just delete them? – kfeger Jun 26 '17 at 21:08
0

I am having this problem with Jessie to but I am new to this so I don't know if this helps. I have the eGalax touch screen (Lilliput) working with the Wheezy operating system. When I looked at devices (as above) for wheezy I got the two input references (as I do with Jessie) but this works perfectly with Wheezy. I suspect the second is possibly a milti touch input. Unfortunately I can't offer any solution but it might not be the second input reference. John.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.