I just recently bought a Raspberry pi 3 and a Kuman 3.5 inch RPI Display. When I put the included micro SD card with the boot files into the pi, it shows a white screen and when I wait some time for it to boot up, it does not, the white screens remains until I shut off the pi. NEED HELP!!!
You need to install the drivers here.
1.You need to install the /driver/LCD-show-160701.tar.gz file.
2.Go to the terminal where you installed this file.
3.Do:
sudo tar zxvf LCD-show-160701.tar.gz
cd LCD-show/
sudo ./LCD35-show
4.It's done!
PS: If you want to go back to the HDMI, go to the previous folder and do:
sudo ./LCD-hdmi