I have a RPI Zero W. I've gone through the process of downloading NOOBS, copying it onto the Pi and installing Raspian.
I can login to the RPI which is connected via WIFI to my home network. I can see it has been assigned an IP address by my router 18.104.22.168, this shows as wlan0 under 'ifconfig', and the routers web interface also shows the IP address assigned.
I've enabled SSH on the RPI using the raspi-config tool.
The problem I'm having is that although the RPI is connected to my network and has internet access, I am unable to access it from another machine on my network via SSH. I simply get 'Connection timed out'. I have no problem connecting to other RPI devices on the network. I am also unable to ping the RPI.
Here's the contents of /etc/network/interfaces
auto lo iface lo inet loopback #iface eth0 inet manual allow-hotplug wlan0 iface wlan0 inet dhcp wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf wireless-power off
Here is the results of 'ifconfig';
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 METRIC:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collissions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr b8:27:eb:54:8e:01 inet addr:192.168.0.18 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ac07:31d7:dbd7:52fc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:0 overruns:0 frame:0 TX packets:78 errors:0 dropped:0 overruns:0 carrier:0 collissions:0 txqueuelen:1000 RX bytes:0 (10.1 Kib) TX bytes:11542 (11.2KiB)
Any help would be appreciated.