I am running the Debian wheezy beta and using my Pi to display my geckoboard dashboards using midori, as a result I want to prevent the screen from going blank, which it does after 10 minutes (though it doesn't seem to turn off the backlight). I have searched through the menu options and can not find how to prevent this. I came across a post on raspberrypi.org suggesting that the following:

sudo sh -c "TERM=linux setterm -blank 0 >/dev/tty0"

would solve the problem, but it does not work. I have also tried changing BLANK_TIME to zero in /etc/kbd/config without success.


This is an X power-saving thing.

Firstly, you may need to install xset, a lightweight application that controls some X settings.

apt-get install x11-xserver-utils

Now open up your ~/.xinitrc file (if you don't have one then create it) and enter this:

xset s off         # don't activate screensaver
xset -dpms         # disable DPMS (Energy Star) features.
xset s noblank     # don't blank the video device

exec /etc/alternatives/x-session-manager      # start lxde

This file runs once every time X starts and should solve the problem. I copy and pasted it from my own .xinitrc and can confirm that my screen does not blank.

  • 3
    Which account should the .xinitrc be created for? The pi account (which auto-logs in) or the root account (which owns the x-server)? – Salim Fadhley Oct 1 '12 at 14:27
  • 2
    what does exec /etc/alternatives/x-session-manager do? When I take it out the bar at the bottom is gone. I'm curious about how it all fits together. A brief explanation would be appreciated. – Scoop Dec 21 '12 at 21:52
  • 3
    Modifying: /etc/xdg/lxsession/LXDE/autostart as described here and modifying ~/.xinitrc + /etc/kbd/config as described from cwd did not get me any further. My screen still gets black with backlight. – Andi Giga Apr 14 '16 at 12:21
  • 7
    Can confirm this does not work on the Pi 3 – djthoms Apr 14 '16 at 18:40
  • 2
    This certainly didn't work on my Raspberry PI 2 Model B running Raspbian Jessie. – ThN Jul 25 '16 at 15:53

The other solutions here did not work for me (fresh Raspbian, boot to GUI). Instead, this worked:

  1. Open up /etc/lightdm/lightdm.conf using your favorite text editor (I prefer nano).
  2. Look for the line #xserver-command=X. Change it to xserver-command=X -s 0 dpms
    • It should be at line 87 if things don't change.
  3. Save and reboot.


  • This DID work on my Raspberry PI 2 Model B running Raspbian Jessie. – ThN Jul 25 '16 at 18:19
  • 1
    This worked for me on Pi3 with Jessie – MikeT Oct 10 '16 at 20:32
  • I'm trying to understand these options. -s 0 sets the screen timeout to 0 minutes, which I assume makes it 'never'. (Is this different from -s off?) Why dpms, though, not -dpms? Don't I want to disable display power management services? – The Guy with The Hat Nov 15 '17 at 15:17
  • @TheGuywithTheHat Have you tried this solution with -dpms? Please report back and maybe we can infer what's going on. – PNDA Nov 15 '17 at 17:09
  • @pandalion98 Testing it right now with dpms, -dpms, and neither. Will report back soon. – The Guy with The Hat Nov 15 '17 at 17:29

I think @Jivings answer may be better, but I have it in my notes to do this:

  • Install apt-get install x11-xserver-utils

  • Edit /etc/xdg/lxsession/LXDE/autostart

Append these lines:

@xset s noblank
@xset s off
@xset -dpms

Possibly also comment out the line that says @xscreensaver -no-splash, so the complete file should look something like this:

@lxpanel --profile LXDE
@pcmanfm --desktop --profile LXDE
# @xscreensaver -no-splash

@xset s noblank
@xset s off
@xset -dpms

Also edit /etc/kbd/config and make sure these values are set as follows (however I believe this is only for when the lightweight desktop (LXDE) is not running (i.e. the pi is still in text / terminal mode):


I believe that the /etc/xdg/lxsession/LXDE/autostart may be the sort of system-wide version of ~/.xinitrc but someone else probably knows the nuances better.

  • 2
    Edits to /etc/kbd/config solved the problem for me. – Steve Dec 12 '14 at 16:47
  • I applied all the changes mentioned in this answer. This certainly didn't work on my Raspberry PI 2 Model B running Raspbian Jessie. – ThN Jul 25 '16 at 17:38
  • 1
    I think there has been some change with profiles by default, the autostart you need to edit might be ~/.config/lxprofile/LXDE-pi/autostart. – Jason Goemaat Jan 2 '17 at 21:23
  • my rpi 2 on raspbian jessie needed the above edits to ~/.config/lxsession/LXDE-pi/autostart as jason points out below – mfink Jul 9 '17 at 13:03

To prevent the screen from going blank try adding consoleblank=0 to the end of the first line of /boot/cmdline.txt


  • Please don't post duplicate answers for duplicate questions. – Dmitry Grigoryev Feb 2 '17 at 14:40
  • 3
    It was a very difficult answer to find and figured it applied. Why not vote for this to be a duplicate question instead of commenting? – Tim Penner Feb 2 '17 at 15:15
  • I voted for the original question to be marked as duplicate of this one. Keeping either of the answers sounds fine, but I suppose you prefer to have the one that got upvoted. – Dmitry Grigoryev Feb 2 '17 at 15:30
  • 2
    I wouldn't want my answer to only be on the duplicate, I would want it on the master of the two - even if I found the other question first. Which is why i suggested you vote instead of comment – Tim Penner Feb 2 '17 at 15:31
  • 1
    This is the only solution that has worked for my Pi Zero with a monitor but no keyboard, and no X11. – Memetic Mar 30 '17 at 0:29

What worked for me was editing ~/.config/lxsession/LXDE-pi/autostart and commenting out the screensaver, all the other xset commands didn't seem to affect it when it is started here:

@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
#@xscreensaver -no-splash

You might also need to add one or both of these lines to disable the power management:

@xset dpms 0 0 0
@xset -dpms

On the version of Raspbian Jessie I got the utils were already installed.

protected by Steve Robillard Jan 2 '17 at 21:34

Thank you for your interest in this question. Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.