I configured an AP using the hostapd in Kali , I can connect to the AP but cannot ping the AP IP and cannot also connect to it by ssh without connecting the cable in eth0. Any ideas how i can connect with ssh without the cable.
hostapd.conf have below configuration
interface=wlan0 driver=nl80211 ssid=errants-PI hw_mode=g channel=6 ieee80211n=1 wmm_enabled=1 ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40] macaddr_acl=2 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_key_mgmt=WPA-PSK wpa_passphrase=Track!ng1 rsn_pairwise=CCMP
dnsmasq.conf have below configuration
interface=wlan0 listen-address=192.168.1.101 bind-interfaces server=126.96.36.199 domain-needed bogus-priv dhcp-range=192.168.1.102,192.168.1.103,12h