Obviously, I am a complete beginner in setting up a server. That is why I started to play around with a raspberry pi in the first place. I already managed to set up some
I am trying for days to set up
radicale, as described in the official basic setup using bycrypt and system-wide systemd.
radicale is already running on the pi (
systemctl status radicale) and the chosen port is also visible, though using the ip
127.0.0.1 but as far as I understand this answer, it should be fine.
Note that I am using a headless setup with
raspbian stretch on the
pi3, connected to the local network via
wifi and I have
no fixed ip assigned. Note also that I extended the range of my router using another one by configuring it as WAP.