First up I should note that I have no coding experience and am following guides.
I'm currently setting up a RaspPi with Raspbian as a Plex server. Plex setup worked fine and I was able to mount the network hard drive (Seagate Central). Plex found files, good job.
However, on rebooting the Pi I lost the mount. After a bit of research it seems I need the disks UUID to mount on booting. For the life of me I cant find it.
Everything i read says to use command "blkid", which gives me the following;
/dev/mmcblk0p1: LABEL="RECOVERY" UUID="59B0-FB97" TYPE="vfat" PARTUUID="0007d388-01" /dev/mmcblk0p5: LABEL="SETTINGS" UUID="85322d63-7f1f-4824-8ef3-5bc01a18c28d" TYPE="ext4" PARTUUID="0007d388-05" /dev/mmcblk0p6: LABEL="boot" UUID="D702-6842" TYPE="vfat" PARTUUID="0007d388-06" /dev/mmcblk0p7: LABEL="root0" UUID="914a5b49-882d-406d-9ae7-d6e7d4b9e2c5" TYPE="ext4" PARTUUID="0007d388-07" /dev/mmcblk0: PTUUID="0007d388" PTTYPE="dos"
command "df -T" gives me this; (other filesystems removed for space)
//'ipaddress'/boland cifs 3886415808 2625757376 1260658432 68% /media/HARDDRIVE
Just in case you need it, I mounted the drive using;
mkdir /media/HARDDRIVE sudo mount -t cifs -o username=x,password=x //ipaddress/boland /media/HARDDRIVE
I'm on struggle street here, can i please get some help finding the UUID. Alternatively if there is a way to mount on boot without the UUID that would be great.