0

I will try connect 18B20+ termomether to raspberry pi 3.

It's how i do that: IMG

In /boot/config.txt i add:

dtoverlay=w1-gpio

After reboot in console, as root, I

modprobe w1-gpio

modprobe w1-therm

But after

ls /sys/bus/w1/devices/

directories list are empty.

Any ideas?

2
  • Yeah, you right ;p. I set bad pin in fritzing.
    – John Smith
    Apr 8, 2018 at 10:58
  • 1
    You should not need the modprobes. That is automatically done by the dtoverlay in /boot/config.txt. A photo of your connections will be useful.
    – joan
    Apr 8, 2018 at 11:09

1 Answer 1

1

Ok, problem was solved by type in /boot/config.txt

dtoverlay=w1-gpio,gpiopin=4

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.