I'm struggling with my configuration of my Raspberry Pi. I want to achieve the following:
eth0: will be used with a static ip and can only connect to the local area network (this will be my NFS server) wlan0: Should connect to my wireless network for internet access
For some reason I'm unable to activate both connection at the same time (yes I have a good power supply). The ethernet will disable the wireless for no reason at all. If i finally get the both up then I'm unable to ping google.com. My question how should I do this correctly? I have the following in my interfaces file:
auto lo iface lo inet loopback auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.101 netmask 255.255.255.0 gateway 0.0.0.0 #auto wlan0 allow-hotplug wlan0 iface wlan0 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf iface home inet static address 192.168.0.157 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 iface default inet dhcp
Kind Regards, and thank you very much!