0

I was using my camera fine, however; today after a short travel inside its original box, when I use raspistill .. I get no data received from sensor error. I have checked the ribbon, and the led on the camera is lit as well as infrared lights at the side.

Probably some connection is loose, do you have any idea what it is?

My camera: https://www.robotistan.com/raspberry-pi-kamera-ayarli-kizilotesi-led-modulu Raspberry Pi 3 Model B, original adapter

4
  • Had same issue. The cable was cracked at one point. Check the cable for damage.
    – kwasmich
    Commented Sep 10, 2018 at 14:44
  • @kwasmich Which cable do you mean? The ribbon? Commented Sep 10, 2018 at 15:51
  • check all cables
    – jsotola
    Commented Sep 11, 2018 at 3:31
  • I reconnected all cables, removed screws and it didn't work at the end. I switched to another camera and it works fine. Commented Sep 11, 2018 at 17:01

1 Answer 1

2

I reconnected all cables, removed screws and it didn't work at the end. I switched to another camera and it works fine.

FYI: If you came here searching this, probably your camera is dead.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.