-1

Im a new in rapsberry.

I want to install centos but I have never used rapsberry. I used arduino.

I downloaded centos 6 for pi. Sd card is ready. But rasrberry the rainbow stays on the screen. My raspberry

and

Screen

How can I fixed it?

EDIT:

I changed usb cable and adaptor. But result is same.

13
  • so, you downloaded the centos image, good start ... when you say "the sd card is ready" ... what exactly does that mean? did you "burn" the image onto the sd card, or did you simply copy the downloaded image to the card? Commented Feb 15, 2019 at 8:16
  • though ... that looks like a pi1 - where did you get the centos image for pi? Commented Feb 15, 2019 at 8:18
  • Yes I burned into sd card. I think Otherwise, it doesn't come rainbow screen. @JaromandaX
    – Tota1907
    Commented Feb 15, 2019 at 8:25
  • And i downloaded in centos web site. The file name: CentOS-Userland-7-armv7hl-RaspberryPI-Minimal-sda.raw.xz @JaromandaX
    – Tota1907
    Commented Feb 15, 2019 at 8:26
  • Normally this is because you have a bad USB cable or power supply. And its an quite normal question, raspberrypi.stackexchange.com/questions/19354/…
    – MatsK
    Commented Feb 15, 2019 at 8:27

1 Answer 1

5

From the image in your question, it is clear that you have an original Pi B

The ARM chip in the Pi B (and A, and B+) is an armv6

There is no Centos image available for the original raspberry pi (armv6), only raspberry pi 2, 3 and 3+ (armv7)

There is a "definitive" list of available operating systems for the raspberry pi at this link ... note that under Centos (and others) it clearly states "Pi 2/3 Only"

The only solution is to buy a Raspberry Pi 2B, 3B, 3B+ or 3A+ - all of which have the prerequisite armv7 CPU (and are cheaper to buy than the original in my experience)

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.