-1

I'm a complete beginner concerning the Raspberry Pi. I have an Pi 3 model B and I was working on an RFID project. Everything was working fine until I wanted to power off my Pi with sudo halt to do some hardware configurations; (which I do every time I want to power it off).

When I reconnected my Pi to my PC through the USB cable I couldn't see my Pi on the connected devices on my phone anymore, and I don't know how to access the Raspbian terminal without putting the IP address of my Pi into Putty and accessing it with SSH.

What happened? And what can I do to fix this?

2
  • 1
    Why did you connect USB to PC - both are master devices, and you would need a non-standard cable? There is too little information to answer whatever your question is.
    – Milliways
    Apr 8, 2019 at 0:10
  • Are you running an access point on the RasPi?
    – Ingo
    Apr 8, 2019 at 8:51

1 Answer 1

Reset to default
0

Under assumption that your Pi's WiFi/Access Point is not working

You can try following options, 1. Power with 2A adapter instead of powering from PC. 2. If you have a network Router, connect via Ethernet cable and check for the IP address. 3. Connect your Pi to PC monitor or LCD to analyze the problem.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.