2

initially my question was about how to fix my code. You informed me that usage of that python class will not work with my setup of one motor. I agree and I want to instead use the GPIO library to control the board controlling the motor. the example code I found:
enter image description here

import RPi.GPIO as GPIO
import time
GPIO.setmode(GPIO.BCM)
GPIO.setup(23, GPIO.IN)
while True:
   if ( GPIO.input(23) == False ):
      print(‘do something’)

I do not know how to edit the code to work with my project.] but I am using IN1 on the controller board and GPIO2 from the pi.

I answered this question but it's not an answer, it is more of a notice that I am going to use different parts. Many of the answers here pointed out that I should try the tutorials and/or use different parts so I will. thanks to everyone who helped!!

Improve this question
3
  • 2
    which part of the code do you not understand?
    – jsotola
    May 13, 2019 at 1:51
  • 1
    You are trying to run before you can walk. You need to understand some basics before attempting this task. I suggest you work through 1) some Python tutorials and 2) look at projects.raspberrypi.org/en/projects/?interests[]=robotics
    – joan
    May 13, 2019 at 7:22
  • I am not trying to skip steps, I will gladly do tutorials, thanks!
    – thecanmanisback
    May 13, 2019 at 23:59

4 Answers 4

Reset to default
1

I am just going to use different parts. These parts are not usable or are too hard to use at this point so I am going to use different motors and stick with GPIOzero

Improve this answer
3
  • And does is work now?
    – Ingo
    May 14, 2019 at 20:57
  • the parts are ordered but not delivered yet.
    – thecanmanisback
    May 15, 2019 at 0:54
  • When the parts arrive I suggest to complete the answer. Now it isn't one.
    – Ingo
    May 15, 2019 at 7:17
0

The line robot = Robot(left = (2, 2), right = (2, 2)) is saying you are controlling the left motor with GPIO 2 and 2 and the right motor with GPIO 2 and 2. This is illegal.

You need to specify four different GPIO. Two GPIO are needed to control each motor as follows:

GPIO#1 GPIO#2  motor
0      0       stop
0      1       clockwise
1      0       counterclockwise
1      1       brake

See https://gpiozero.readthedocs.io/en/stable/api_boards.html#robot

Improve this answer
5
  • It is only 1 motor. The project is a pi with GPIO2 connected to an H-Bridge which is connected to 1 motor on a car. should that line be robot = Robot(left = (2, 1), right = (2, 1))?
    – thecanmanisback
    May 12, 2019 at 22:07
  • Frankly it sounds wrong. The robot class expects a left and right motor being driven by a motor driver board. If you are not doing that you should not be using the robot class.
    – joan
    May 12, 2019 at 22:12
  • oh no. 1. I though the H-Bridge acted as the motor driver board... is that not true? 2.The error was about the way I defined 'robot' so are you saying that the error is happening because I have 1 motor instead of 4? 3. What would you use instead of this class if it was your project? Would you use shell commands or just a different python class?
    – thecanmanisback
    May 12, 2019 at 22:57
  • 1
    @thecanmanisback This is the wrong site to ask open ended questions. You would be better off asking on raspberrypi.org/forums.
    – joan
    May 12, 2019 at 23:00
  • I edited my question at the top to fit more into what this forums is used for. @joan
    – thecanmanisback
    May 12, 2019 at 23:40
0

I suggest you return to using gpiozero, but select a suitable class.

We don't know anything about your robot (include detail in your question).

I guess it has a single motor with forward/reverse so the following would be appropriate:-

https://gpiozero.readthedocs.io/en/v1.2.0/api_output.html#motor

Improve this answer
7
  • I made a diagram of my project that includes a lot of detail: snag.gy/7dL0pb.jpg it helps me to have a very simple working program that I can reverse engineer and learn from. Here is the code at the link you gave: from gpiozero import Motor motor = Motor(17, 18) motor.forward() In my case would I change the code to motor = Motor(1, 2) and just ignore the 2 and have no reverse in this project? (no reverse is fine here)
    – thecanmanisback
    May 13, 2019 at 1:31
  • it is hard to see in the diagram, but the raspberry pi is plugged into the IN1 port on the H-Bridge
    – thecanmanisback
    May 13, 2019 at 1:44
  • Paste the image into your question not a link DO NOT put details in Comments
    – Milliways
    May 13, 2019 at 1:54
  • I pasted the image into my question, and I am going to return to using GPIOzero but I am also going to get a 2 motor chassis that uses the motors recommended in the pi tutorials and just abandon my homemade model car with one motor for now.
    – thecanmanisback
    May 14, 2019 at 0:39
  • @thecanmanisback You should try to get your initial hardware going; abandoning a project is not the way to learn. People are willing to help, BUT you need to post specifications of the parts you are using NOT pictures. You NEED 2 connections to the Pi to use a H bridge (as well as a Gnd connection). This will apply to any new hardware.
    – Milliways
    May 14, 2019 at 0:58
0

Question

Usage of that python class will not work with my setup of one motor. I agree and I want to instead use the GPIO library to control the board controlling the motor.

Example code I found: import RPi.GPIO as GPIO

I do not know how to edit the code to work with my project.] but I am using IN1 on the controller board and GPIO2 from the pi.

Answer

  1. It is not at all clear what DC motor driver you are using. Is it L293D, L298N? You might like to compare you motor driver board the L298N used by the following tutorial.

    Build a robot buggy - projects.raspberrypi.org

build a robot buggy

  1. It is also not clear if you are use Rpi.GPIO module or gpiozero1.5. Gpiozero assumes a generic motor driver board. If your motor is not that generic, you might find teething problem. If you are using gpioZero, you should start with "from gpiozero import Robot".

  2. gpiozero's Robot is a bit complicated. For example, it has a "curve" thing:

curve_left (float) – The amount to curve left while moving backwards, by driving the left motor at a slower speed. Maximum curve_left is 1, the default is 0 (no curve). This parameter can only be specified as a keyword parameter, and is mutually exclusive with curve_right.

The curve function to drive two motors at different speeds is for sure not for newbies. I would recommend to start with Build a robot buggy - projects.raspberrypi.org, which takes you by the hand, starts with simple movements, and finally hints you how to drive you robot along a square path.

But if you have already begun and got stuck with GpioZeroRobot, I would suggest you to remove all advanced stuff like class "curve" and "phase/enable". They are too advanced for newbies.

References

Build a robot buggy - projects.raspberrypi.org

Why isn’t my Raspberry Pi motor spinning?

Why don't my motors rotate?

Gpio Zero Robot 16.1.15. - GPIO Zero

A generic dual-motor robot

This class is constructed with two tuples representing the forward and backward pins of the left and right controllers respectively. For example, if the left motor’s controller is connected to GPIOs 4 and 14, while the right motor’s controller is connected to GPIOs 17 and 18.

Example to drive the robot

from gpiozero import Robot
robot = Robot(left=(4, 14), right=(17, 18))
robot.forward()

curve_left (float)

The amount to curve left while moving backwards, by driving the left motor at a slower speed. Maximum curve_left is 1, the default is 0 (no curve). This parameter can only be specified as a keyword parameter, and is mutually exclusive with curve_right.

Phase/Enable motor board

class gpiozero.PhaseEnableRobot(left, right, *, pwm=True, pin_factory=None)

Extends CompositeDevice to represent a dual-motor robot based around a Phase/Enable motor board.

Improve this answer
4
  • I am going to stop using my homemade car with one motor for now, and buy a 2-wheel buggy that uses the recommended motors from the raspberry pi tutorials.
    – thecanmanisback
    May 14, 2019 at 0:37
  • Can also find tutorials using L298N motor board. I confess that I actually do not understand the gpiozero code. EG, they use "tuple" which I have never used, even having played python a couple of years. I do use "list" but for simple things like a list of 4 motors. I heard that "tuple" is not changeable, very efficient etc etc. I only use integers, not floating they are using! Tell you one more little secret - I don't quite understand what actually is a "class". I only use "functions", never "class". I know "functions" can easily be converted to "class", but not vice versa.
    – tlfong01
    May 14, 2019 at 1:38
  • yea I don't use tuple either, I always use lists. I do however understand class, the best way I can think to quickly explain it is that it is a type of object. You can make objects or instances of a class. For example you are of class human, and you are object/instance tlfong01 of class human. Anyway, thanks for the help, but I am going to buy different motors for this project because the problems I was having all originated from the motor I have!
    – thecanmanisback
    May 15, 2019 at 0:52
  • @ thecanmanisback Thank you for your help explaining the OO thing. I agree with almost all you said, except the phrase that confuses me - "It [a class] is a type of object". Anyway, I will google more to clear my mind. And for motors, I highly recommend the very newbie little yellow motor.
    – tlfong01
    May 15, 2019 at 1:30

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.