Linked Questions

As mentioned in a comment to https://raspberrypi.stackexchange.com/a/19701/8697 and also in a few other places on this Forum "when the pi is shut down, pulling pin 5 low will make it boot up again" I ...

I have a RTC DS3231 connected to my Raspberry Pi 3 B+. I connected it using this tutorial https://www.raspberrypi-spy.co.uk/2015/05/adding-a-ds3231-real-time-clock-to-the-raspberry-pi/ and everything ...

I implemented a simple script (well, someone else created it, just installed it hehe) to shutdown my raspberry pi when a button is pressed that connects pin 5 and 6 (I think those are the numbers - ...

I've recently acquired a Raspberry Pi 4/4GB, which I'm planning to use in place of a failed motherboard/GPU in an old 24" iMac, re-using only the display, PSU, fans and speakers. Initially, I'm at ...

I have been looking at old information and messing around a lot, but I ended up lost :( I need my RPI4 running Buster to execute a shutdown script when the ethernet port state changes from plugged in/...

I am new to Raspberry Pi and am trying to use the headless shutdown module provided by Adafruit. I downloaded the script of Adafruit-GPIO-Halt to my Raspberry Pi, installed it to the /usr/local/bin/...

I need an option to reboot an RPI completly (simulate unplugging it from the power and re-plug via command) I've tried sudo reboot But its not going to run power 0 as I know... sudo halt seems more ...

I have two completely seperate python scripts involving the GPIO that runs on startup. The issue i'm having is that when I call the turn fan on or off it sometimes triggers the halt script I have and ...

Just doing some testing for a project. The project involves two SBCs right now(one is the Raspberry Pi 4b). I have one TV handy so I had the other SBC connected initially. For reasons pertaining to ...

I'm trying to use wake-from-halt on my Raspberry Pi A+, but it does not work. According to elinux.org/RPI_safe_mode#cite_note-1 When using bootcode.bin dated 12/04/2012 or later, the same two pins (5 &...

I have read here (and many other places) that connecting pins 5 and 6 will wake a Pi from sleep/standby. I have a few pi's that will be shutting down remotely at the same time. I would like to connect ...

I notice that a Pi 3B+ with the offcial touchscreen display will black/power off the display the instant that a shutdown command is issued, but it appears the Pi is still busy doing some things (what?)...

This question was asked twice, my apologies. The solution was supplied by Ingo here: How to make Raspian Buster shutdown when I unplug the ethernet cable I would like to configure my RPI4 to perform ...