Questions tagged [crash]

This tag is for questions about a Raspberry Pi that boots, but crashes after boot.

Filter by
Sorted by
Tagged with
1
vote
1answer
37 views

Pi Zero with RS-485 interface operated inside breaker panel crashes

Setup I am operating an Raspberry Pi Zero inside a distribution board. The pi is powered via usb using a din rail power supply and it connected to an usb-rs485-adapter to get modbus data from a smart ...
0
votes
0answers
54 views

Pi Zero keeps crashing while running pi-hole

Just got my first Raspberry Pi - a Pi Zero W. I bought it with the intention of running pi-hole on it. However, after an hour or two it will crash. This has happened 6 or so times now. I swapped ...
0
votes
0answers
41 views

How to track why two RPi's are constantly “freezing”…?

I have two RPi's, one 3B+ and one 4 8GB. Both run updated Raspbian with Node-Red, VNCServer, No-ip DUC and have SSH enabled. No mouse or display connected to any of them. The 3B+ serves as the "...
0
votes
0answers
71 views

Raspberry Pi 4B Keeps Crashing

I'm not sure what happened. I have my Raspberry Pi 4B running on Raspbian Lite (May 2020 version). This all started happening when I decided to use my Pi to run a game server. I decided to submerge it ...
1
vote
1answer
122 views

ClamAV Error for scanning

I'm trying to install ClamAV on my pi zero. Which is an antivirus program. I ran the command : sudo apt install clamav Then I typed in: clamscan But it said: LibClamAV Error: cli_loaddbdir(): ...
1
vote
1answer
30 views

Raspbian Crashing on RPi2 | full screen goes to one (somewhat random) color when web browser loads heavy page

I've had this strange problem with my Raspberry Pi 2 for a long time now. I have it set up as a sort of third monitor for my main computer. I've installed Synergy and Redshift, then set the screen to ...
1
vote
0answers
204 views

My raspbian buster is stuck at Splash Screen with polkit.service!

I was working fine with my Rpi4 this morning. Next time when I started it was okay. Then there was some resolution issue. so I went into raspi-config and disabled the OpenGL. After a restart my PC is ...
-2
votes
1answer
42 views

3B+ locking up (blank video output) with red & green LEDs solid, requiring reboot. Which logs to check? [closed]

My Pi 3B+ (full config details at link) has started to lock up out of the blue (red and green LEDs on), requiring a reboot. Which system log(s) do I check to see what the problem might be?
0
votes
1answer
45 views

System crashes when a USB device is plugged in or a web browser is opened

I recently turned my pi into a standalone network following this guide: https://www.raspberrypi.org/documentation/configuration/wireless/access-point.md But now when I open a web browser, or plug in a ...
1
vote
0answers
366 views

Freecad not working on my raspbian!

I just installed free cad on raspbian from repo . Then after the installation was complete when I preseed the freecad icon from menu it is opening. But when I am pressing new project the software is ...
1
vote
2answers
124 views

Weird problem with Raspberry Pi falling over

So I've been trying to trouble-shoot this myself for weeks. I have a Pi3 (and a Pi4, though the 4 causes no issues). My Pi3 is fully up to date, on Raspbian Linux 4.19.81-v7+ This issue persisted ...
0
votes
2answers
9k views

How am I supposed to set GPU memory in RPi4?

I am using RPi4 for a while and I found some problem playing videos on VLC and you-tube. After searching a long time I found that these problems can be solved by increasing GPU Memory. I found that ...
-1
votes
1answer
28 views

After my script crashes, I can't run any more scripts, RP 3 Model B+

I am running a script that is probably crashing. When I run it, nothing seems to happen, so I hit Ctrl + Z to halt the program. But then I can't run any other script on the Raspberry Pi 3 Model B+. ...
1
vote
1answer
54 views

Was stable now keeps crashing

My Pi keeps locking up - cannot interact with it via keyboard (even Ctrl-Alt-PrintScr commands) or anything else. Screen (console) frozen. Pulling power out and rebooting brings it up looking fine ...
0
votes
0answers
74 views

Random crash after several hours

sorry for the next error) I'm working on a project with my rpi, which just test on a student website if a teacher is absent, or if a lesson is moved. Actually, the rpi crash totally randomly : after 7-...
2
votes
1answer
690 views

How do I set my gpu_split?

My Emulation Station keeps crashing saying I need to make sure my gpu_split is set high enough and/or switch back to carbon theme. Can someone help me dial this in? Any thoughts or suggestions are ...
5
votes
1answer
5k views

How to revert from rpi-update to stable build

I have been using a RPi3 for the last year without any issues. I have had rpi-update as part of a regular update process (cron job). Lately I have been experiencing crashes. I started to investigate, ...
3
votes
1answer
99 views

Is my Pi Zero W overclocking? Why does it disconnect?

I've got a Raspberry Pi Zero W which is connected to a 4 relay module, servo motor, and IR sensor. It has two functions: first, it operates continuously, watching the IR sensor and, when tripped, it ...
5
votes
2answers
332 views

Pin powered Pi crashes when servos move

I have been working on a circuit to power a Raspberry Pi and servo(s) from a single power source. The diagram below shows the basic configuration, although the 'AA battery' is actually two 18650s. ...
0
votes
0answers
42 views

Raspberry Pi 2 crashes on manual ifconfig command

I'm trying to manually set IP configuration on my raspberry pi 2. Using SSH I run the following command in the terminal sudo ifconfig eth0 10.0.0.100 netmask 255.255.255.0 up my raspberry pi then ...
1
vote
1answer
319 views

How can I diagnose a headless Raspberry Pi Zero W that hangs?

I'm trying to run my Pi Zero W as a motion detecting camera using RPI cam web interface but it keeps hanging after a few hours at most. Before it hangs, it can record motion detect videos and upload ...
1
vote
2answers
456 views

Opening any browser often crashes Raspbian

I've got a very simple setup on my Raspberry pi 2. It's a clean install of the latest version of Raspbian (via NOOBS) with Redshift and QuickSynergy installed. Almost any time I open a web browser, ...
0
votes
2answers
287 views

Restart Pi after ping failure?

I have been creating a prototype using Pi Zeros, they work great at my house but are failing often at customer's site (other side of country). I do not know if the Pi kernel is crashing or if it's ...
0
votes
0answers
41 views

How to recover from a kernel panic like this?

Getting stuck while boot process, I don't remember installing anything on Kali linux raspberry pi
0
votes
1answer
811 views

Cannot start openELEC on Raspberry Pi 3B+

I've tried a whole bunch of media center systems for my fresh RaspberryPi 3B+. The most interesting one for me is openELEC, but unfortunately it is the only one I can't seem to successfully run - ...
0
votes
0answers
89 views

Is there a limit on Raspberry PI's display size?

I have been using Raspberry PI 2 and 3 for the last year and a half with no problem. However, over time I have noticed that different sizes of display connected to the PI effected how my software ran. ...
5
votes
1answer
222 views

Pi shuts down every day at 11:23 PM

I have a Pi Zero W running Raspbian Stretch Lite (June 2018). I'm using it to turn the crank on an automatic cat feeder. I've barely changed the base configuration: apt-get-installed git and samba, ...
3
votes
1answer
133 views

Everything is dead, but Pi 3B still boots

I left my Pi 3B (V1.2) alone, running a 64-bit build of Debian for a project. Everything was fine. When I returned, however, I found that everything was dead. Nothing was connected to it, by the way. ...
1
vote
0answers
106 views

Kernel panic, real time clock (possibly), UPS Pico

Have a fresh install of KivyPie, which is some months old, with updates (have done apt update/upgrade). It crashes: and the reason seems to be these two lines enable_uart=1 dtoverlay=i2c-rtc,ds1307 ...
4
votes
2answers
6k views

Raspberry Pi 3B+ freezes randomly

General setup My RPi is connected to a mouse, keyboard, and monitor. My swap size is set to 1000 MB and I'm not using wifi. Problem The RPi freezes randomly, meaning the GUI is frozen, no SSH ...
1
vote
0answers
671 views

Raspbian freezes consistently every day at 2 AM

I had a Raspberry Pi 2 Model B that I used as a media center, running Plex Media Server, connected to a NAS, where the media was stored, and a couple of scripts that would run once an hour (CRON jobs)....
0
votes
3answers
104 views

Pi freezes after softPwm

I'm building a robot car as a beginner project with a Raspberry Pi 3 Model B. It was easily possible to control the motors with help of the wiringPi library in C. To adjust the speed of my car I want ...
1
vote
5answers
3k views

RPi3B crashes randomly

Help needed with this, I've run out of ideas. My RPi3 crashes randomly. - Power supply 2.0A - nothing connected to GPIOs - HDMI, USB mouse, USB-keyboard and LAN are connected - SD card is Sandisk ...
0
votes
1answer
524 views

How to reinstall python3 from binaries?

One of my RPis has a problem with python3: root@sent121:~# python3 Segmentation fault When debugging a print('hello') script I get root@sent121:~# dbg python3 -bash: dbg: command not found root@...
0
votes
1answer
247 views

After several days my Pi's stop being able to launch new processes nor allow SSH connections

We are running raspbian stretch and have our mono based application running fine however we've found that after several days (this can be 2 days it could be 7) that our PI's just hang. Kernel: Linux ...
0
votes
1answer
838 views

Cannot boot into desktop after crashing

Good day all, I am new to the Raspberry Pi. I have just purchased a Raspberry pi 3. I downloaded the Raspbian OS and installed it on a brand new 16GB Kingston microSD card. First time I was ...
1
vote
1answer
4k views

Pi Zero W freezes/crashes/hangs from day 1

I have finally made the step and bought myself a Pi Zero W a few days ago. During the last 10 years or so, I have worked with multiple microcontrollers but never with a Raspberry computer. Hence, I ...
1
vote
1answer
375 views

Raspbian on RPi2 random total freeze since upgrade to stretch

I purchased a Raspberry PI 2 two years ago and installed Raspbian Jessie at the time. I configured several services including nginx/ssh/... with very specific settings so complete OS re-install is ...
8
votes
2answers
18k views

Raspberry Pi 3 Freezes

My Raspberry Pi 3 Model B freezes randomly. This as been going on since I got it, about 4 months ago. It sometimes freezes on reboot causing reboot loops. It freezes on Chromium when all that's open ...
1
vote
2answers
411 views

PiFmRds: Raspbian freezes when I change windows. How do I fix it?

I am running my raspberry pi 3 with a radio station software PiFmRds The program works fine but then when I go to move the window (or any other window) the system freezes and I have to unplug and ...
1
vote
0answers
437 views

Video streaming crashing after an hour

I would like to use a Raspberry Pi Zero to stream video from the camera. I have WiFi and ssh setup, and all works well. However, it appears that after an hour or so, the Raspberry stops streaming ...
0
votes
1answer
146 views

Freeze caused by bluetooth and webcam

My web app has a webcam running using ng-camera(based on webcam.js), and a separate bluetooth sniffer running on node js on the background. After several minutes running, the app and raspberry pi will ...
0
votes
1answer
405 views

Brand new Raspberry Pi, and it keeps crashing

So, I just bought a brand new Raspberry pi for the first time. I followed the instructional videos on their website, and I've got the default OS installed, however, after just a few seconds clicking ...
1
vote
0answers
37 views

Pi rebooting on 1 specific apt-get installation

I am experiencing a very peculiar problem with my Raspberry Pi 3 (model B V1.2), running the latest version of Raspbian (the June 2017 version). Whenever I try to install nginx using apt-get, my Pi ...
0
votes
1answer
584 views

My mono service crashed - how do I figure out what happened?

I wrote a .net 4.0 mono service called snserver.exe and am hosting it on a Raspberry Pi via mono-service. In order to run it, I execute the following line: mono-service -l:/var/supernovaServer/...
1
vote
1answer
638 views

Lightning bolt then system crash. Only red light is on

I was using my pi 3 with the official power supply and compatible keyboard and mouse. I was just using geany like I normally would when the lightning bolt appeared (the sign for overloading the pi) ...
2
votes
2answers
79 views

Troubleshooting a crashes

My Raspberry Pi 3B is constantly crashing and rebooting, roughly every 10 min. Originally I thought it was only on Youtube. But it happens on many websites - hell I hope it doesn't crash before I can ...
1
vote
1answer
695 views

What's causing my Pi to freeze every few days?

I run my Pi headless, it's in my loft monitoring the output from my growatt solar inverter. It runs a cron every 5 mins to update my data, no data no problem as the code handles this. I've stopped ...
0
votes
1answer
207 views

NTP crashes Raspberry Pi

I have a Raspberry Pi 3. I use it as a FTP-server provisionally. Every 2/3 days it crashes because of a problem with the NTP. I have cut the power to reboot it. I have the system logs which show ...
1
vote
2answers
159 views

Raspberry Pi 2 Crashes, ACT light blinking

after a while of my headless Pi being on it usually crashes so that I then have to psychically unplug power. I have noticed that after a crash, red light is gone but the green LED ACT is blinking at a ...