Questions tagged [docker]
For questions about using the Docker virtualisation tool with the Raspberry Pi.
97
questions
0
votes
0
answers
14
views
Detected aborted journal when docker start
Recently I started working with Raspberry PI 4 and I've been facing troubles with external SDD and Docker. I connected an external SDD to Raspberry and I configured it to automatic mount drive on ...
- 101
0
votes
1
answer
25
views
How do I get Docker host mode networking to work on a Pi?
I have Docker running on my Pi running Raspbian right now, so far it's okay but I want to enable host mode networking so that I can obtain the source IP addresses of requests going to my container. ...
0
votes
0
answers
28
views
Docker image - armv7 - Python Alpine 3.6
Using docker on a PI3, I need to rebuild an image which uses Alpine 3.6 - but I get an error. The URL is fine, but when a CURL it, it shows a redirect. I've tried 3.9 and 3.10 as well, but I believe I ...
- 119
1
vote
0
answers
50
views
Nextcloud Docker install on RPI unsuccessful
I'm trying to install NextCloud via Docker on my Raspberry Pi 4. I have one version up and running with self-signed SSL certificates, but for some reason I cannot update that one.
Here the docker-...
- 11
1
vote
1
answer
435
views
Problems installing docker on raspberry pi 4B bullseye
I'm trying to install docker on raspberry pi running Raspbian bullseye but I am running into a wall related to iptables. I have tried various methods mentioned at https://docs.docker.com/engine/...
- 121
0
votes
0
answers
40
views
Pihole docker IP and DNS
I followed this fantastic guide and now everything is running.
My server is at 192.168.1.198 and my modem/router is on 192.168.1.1
I put the server IP address in LAN DNS in modem config but nothing ...
- 1
0
votes
0
answers
38
views
Can't change ownership of '/dev/gpiomem' in a docker container in RPi
I'm trying to run a simple docker container with a python base image to control the LEDs on my RPi4.
The Dockerfile compiles fine and I'm running it as follows: docker run --rm -ti --privileged --...
0
votes
1
answer
264
views
Install Webmin on Bullseye RPi 4B
I'm trying to install Webmin on raspberryOS bullseye 32bits (5.10.87-v7l+ kernel), and the installation get stuck on: "Unpacking webmin (1.983) ..."
I already try to install over 2 methods:
...
- 21
0
votes
1
answer
34
views
Opening web-page in CLI
I have a Gmail API running in a docker container on raspberry pi. I only access the pi through an SSH session via terminal. It needs to authenticate me as a user. This requires that I go to a ...
- 1
0
votes
2
answers
69
views
How can I connect Rasberry Pi to internet via a 4G network?
I want to connect Rasberry Pi to internet via 4G network.
The idea of my project is to take a picture (or stream a video) with Rasberry Pi camera and send it to a distant cloud (say a Docker container)...
0
votes
1
answer
94
views
What's the normal flow for pigpiod.service?
I inherited a Python code from a former coworker that uses pigpio library to control Raspberry Pi pins. This code is running inside a Docker on the Raspberry Pi
I am now experiencing a problem in ...
0
votes
1
answer
625
views
Docker-Compose cannot locate specified Dockerfile
I've copied a docker-compose.yml from github with the following:
version: '3'
services:
db:
image: postgres:12-alpine
restart: always
volumes:
- nextcloud-db:/var/lib/postgresql/...
- 1
0
votes
1
answer
222
views
Testing a Raspberry pi image in a docker container
I would like to make a smoke test of a Raspberry Pi image in a docker container.
I am building the image using packer.io and the build-arm-image plugin in a gitlab pipeline inside a docker container. ...
- 101
0
votes
1
answer
2k
views
How to Resolve Port 53 Conflict Between, systemd.resolved and pihole-dnscrypt docker
Problem: port 53 conflict between systemd.resolved and pihole in the pihole-dnscrypt docker
Setup: pi 4, ubuntu 20.04.2 (clean install)
Guides for install:
(1) https://github.com/losuler/pihole-...
0
votes
1
answer
382
views
How to get Podman 3.1.2 running on Ubuntu 20.04?
Fresh installation with Raspberry Pi Imager of Ubuntu Server 20.04.2 LTS (RPi 3/4/400) on a Raspberry Pi following standard tutorials:
cat /etc/os-release
export VERSION_ID=20.04
sudo sh -c "echo ...
- 103
0
votes
1
answer
101
views
Cannot install Docker-Compose - Docker is installed
I recently bought a Raspberry Pi 4 Model B with two 32GB SD cards. I installed Raspbian on the first card and I have played with it for a few weeks. I installed Docker; Docker-Compose and created a ...
- 101
0
votes
1
answer
2k
views
How to run GitLab through Docker on Raspberry Pi 4b on Ubuntu Server?
While trying to start GitLab in a Docker container I am experiencing some issues. The command does works on other pc's. The command consists of:
sudo docker run --detach \
--hostname 127.0.0.1 \
--...
- 131
0
votes
1
answer
58
views
SSL certificate for multiple dock containers running on RPI 4
Hi guys I have a question regarding docker containers and ssl certificates.
I want to install more than one docker containers like pi hole , Bitwarden and motioneye .
To access them I have to type ...
0
votes
1
answer
109
views
Building a Virtual machine with the .img file of the raspberry pi buster : Unable to find image 'docker/binfmt: locally
I would like to emulate the exact copy of the Rasp berry Pi OS on a virtual machine that can run on my jetson nano. I've found this tutorial and I tried to replicate it :
Building a Virtual machine ...
- 101
2
votes
1
answer
839
views
Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?
Raspberry Pi 4 8GB
Ubuntu 20.04.2 LTS
Before this happened, I was able to run a bunch of Docker containers without an issue. However, my Pi suddenly stopped working (wasn't able to SSH into it, wasn'...
0
votes
1
answer
2k
views
certificate problems on docker image for rpi (alpine) [closed]
I'm trying to build https://github.com/kylemanna/docker-openvpn on my raspberry. I tried it on 2 raspberries in different internet connections and I get the same error:
pi@raspberrypi:~/docker-openvpn ...
0
votes
1
answer
655
views
`No module named 'numpy'` after `apt install python3-numpy`
I want to use the python package 'numpy'. After a bit of research, I found that using apt install python3-numpy seems to be the recommended way of installing it on the raspberry pi 3 (within a docker ...
- 111
0
votes
0
answers
32
views
Pi 2B with docker loose connection after some time
I have a Raspberry Pi 2B, I installed first Raspberry OS lite and then Ubuntu Server. The behavior I will descript was the same in both systems.
So, I wanted to use Docker to run a web server (1 ...
- 99
0
votes
1
answer
134
views
Running Raspberry PI in Docker [closed]
So, there are lots of Docker on PI questions out there but I'm looking todo it the other way, or run Raspberry PI in a Docker image running on x64 based platform. Are there any images built for this? ...
- 101
4
votes
0
answers
826
views
Docker Alpine:latest image fails to get date so everything fails
I just got a Raspberry pi 4 with 8GB and a SD. I ran all the updates and went directly to install docker and discovered that many images were randomly failing. I narrowed it down to the alpine:latest ...
- 41
0
votes
0
answers
230
views
Spotifyd in docker on Pi4
Has anybody got spotifyd working in a docker on a Pi4? I tried https://hub.docker.com/r/ggoussard/spotifyd but it is not working.
Running ubuntu server arch reports aarch64. But only the armhf version ...
- 200
1
vote
1
answer
7k
views
Running docker on Raspberry Pi Zero W
Today I was trying to install Docker on my Raspberry Pi Zero W. However, I ran into some weird issues.
I installed the Docker Engine after reading through a bunch of tutorials, stackexchange questions,...
- 13
0
votes
1
answer
37
views
Manual install or Docker containers for setting up software on RaspPi? [closed]
I’m planning my first RaspPi project, and it has a few software components.
I was intending to install and set up each piece of software manually.
While planning the project, I came across a script ...
- 113
1
vote
1
answer
4k
views
Can motion and or motioneye be configured to record audio with video files?
I have motioneye running in a docker container on raspberry pi OS on a raspberry pi 4. I have a USB microphone attached, I want to record audio with the video files, in the same file if this is ...
- 111
0
votes
1
answer
390
views
How to setup Pi with a mdns address other than .local?
hardware
Raspberry Pi 4 running Raspbian Lite
Purpose
I already have an IoT Stack comprising of InfluxDB, Telegraf, Mosquitto, Grafana running on the Pi via docker (docker-compose more precisely) ...
- 1,423
2
votes
0
answers
1k
views
Mail server docker container for Raspberry Pi?
Does there exist a low maintenance mail server for Arm configured as a Docker container? I no doubt could set one up by hand but I really have better things to do with my time, and I'm lazy :-)
- 728
4
votes
3
answers
1k
views
huge syslog filled with dhcpcd lines
I have a pi that is defined wi static IP in /etc/dhcpcd.conf:
interface eth0
inform 4.3.2.77
static routers=4.3.2.1
everything worked great until lately once a day I had to restart it because it was ...
- 179
2
votes
1
answer
4k
views
failed to mount overlay: no such device when start docker in Raspberry Pi 4
when I am using this command to start dockerd in Raspberry Pi 4, it shows me this error:
raspberrypi% sudo dockerd
INFO[2020-07-26T18:41:15.229201974+08:00] Starting up ...
- 141
-1
votes
1
answer
256
views
Raspberry pi 4 - wi-fi only works after dhcpcd restart - related to docker networks on same pi?
I'm having issues with wi-fi on my raspberry pi 4. It doesn't work on start up and I see the message "No wireless interfaces found" - ethernet is working fine at this point.
When I run sudo ...
- 101
0
votes
0
answers
319
views
Running GUI within docker despite error
I am running ROS within docker and I try to use a GUI ROS node.(turtlesime)
I succeeded (I could see the turtle) but in the terminal where I run it I got the errors:
MESA-LOADER: failed to retrieve ...
- 211
1
vote
1
answer
1k
views
Pi eventually loses network connectivity since starting to use docker and docker-compose
I'm having this issue on both a Pi 3B and a Pi 4 4GB model. I'm running some programs I wrote that run with docker-compose, and most days, if not every day, around the same times I suddenly won't be ...
- 121
0
votes
0
answers
447
views
Veth as interface Pi4 Model B
Very new at this, so forgive my ignorance; I have portainer container running in docker on my Pi 'Model B. al was working fine and suddenly I cannot go on internet (altough connected via either eth ...
-1
votes
2
answers
248
views
Cannot install docker on RBPi 3 (strecht) through convenience script
I am trying to install docker on my Raspberry Pi 3
$ cat /etc/os-release
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"
NAME="Raspbian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
VERSION_CODENAME=...
- 111
0
votes
0
answers
128
views
All in one Raspberry pi Server?
Does Grafana server + influxDB + ChirpStack Gateway OS full runs on same Raspberry pi that RAK2245 mounted gateway? As you know latest raspberry pi 4 have 8gb ram. I will only monitor about 20-30 ...
1
vote
1
answer
256
views
Who has Docker working (pi 4b)? What OS did you use? [closed]
First off I am running berryboot on the sd of my raspberry pi 4b so I can load/run raspbian desktop OS off a 480gb SSD. I hate not have running out of storage ever (this works fine). Issues:
Docker ...
- 11
0
votes
2
answers
966
views
Berryboot, raspbian, docker, SSD, aufs vs overlay2 storage drivers, nnc1: timeout waiting for hardware interrupt, pi 4b
Hi my goal is to step up my pi 4b with berryboot loading the OS onto a SSD where I can start running docker to become better familiar with it. Then use pi-hole and pivpn and whatever else might be ...
- 11
1
vote
1
answer
384
views
Installing docker on Raspberry PI 3
I'm getting the following trying to run docker on a Rasperry PI 3. Link to the the instructions I used.
Setting up docker-ce (5:19.03.8~3-0~raspbian-stretch) ...
Job for docker.service failed ...
- 111
1
vote
1
answer
1k
views
PiHole in docker no webserver
I'm trying to get PiHole to run in a docker on my raspberry pi 4. For some reason I'm unable to solve an issue with lighttpd.
docker-compose.yaml:
pihole:
container_name: pihole
image: ...
- 201
1
vote
0
answers
987
views
Chromium Browser kiosk not saving cookies
I'm running chromium browser in kiosk mode in a docker container. The page loads a login screen. You sign in and the page gives you a cookie so that you never have to login again. This does work on my ...
- 11
1
vote
0
answers
697
views
I2C devices on docker container
I am running a docker container on Raspberry Pi 3 and I am trying to read from an I2C device from the container. When I use i2cdetect inside docker I can see the devices. The run option I use is sudo ...
1
vote
1
answer
451
views
Running Docker on Raspbian -- need to install raspberrypi-kernel-headers
I am running an image that's running on several amd64 servers and on a brand new RPI4.
One of the things that's needed are the kernel headers.
The image is being pulled is FROM debian:stable-slim. ...
- 285
0
votes
0
answers
184
views
Raspberry pi 4 Hostname always changing
I have a raspberry pi 4 with raspbian buster installed. I set the hostname using raspi-config to "myrpi". I can connect to it using ssh and it works fine. But after a few hours or so, the hostname ...
1
vote
1
answer
2k
views
Docker error "exec format error" in reverse proxy of nginx
Short Version
I am trying to rebuild the reverse proxy of jwilder/nginx-proxy:alpine on my Raspberry Pi 4 running Raspbian 10.
As the container is not configured for armhf architectures, I tweaked ...
- 223
0
votes
1
answer
521
views
USB mount : space issue
I added a 256 GB USB stick , mounted in :
/mnt/mydisk
I setup all my docker to have they files stored in the USB stick:
e.g:
docker create --name=transmission \
-v /mnt/mydisk/Download/Deluge/...
- 217
0
votes
0
answers
2k
views
Unknown host QEMU_IFLA type: 50 intalling python on docker
I'm trying to create a docker image to compile python libraries for arm on a x86 instance.
This is the process I'm following:
1) Install quemu:
sudo apt-get install qemu qemu-user-static qemu-user ...
