Questions tagged [driver]
Questions about software drivers for external peripherals as well as drivers for the system components. This is NOT for questions about "driver boards", e.g., for motors; use 'dc-motor' instead.
313 questions
2
votes
3
answers
463
views
Where to find libraries for using existing popular sensors? [closed]
I am new to pi and was wondering if there are any existing libraries for common sensors.
I have used Arduino in the past and that time I didn't use any existing libraries, just checked specs for ...
2
votes
1
answer
104
views
Moving Wi-Fi driver module to another OS
I have a Wi-Fi adapter (the chip is Realtek RTL8192EU) which I use with my Raspberry Pi 2. I first tried using it with Raspbian Jessie (based on Debian 8), but the driver was not installed by ...
1
vote
1
answer
833
views
How to check if Edimax EW-7811Un driver has been correctly installed?
I am using an Edimax EW-7811Un wireless adapter on a Raspberry Pi 2B on which I have a minibian installed, a minimal image.
I think I've installed the 8192cu.ko driver files correctly, but I'd like to ...
17
votes
8
answers
104k
views
Mysterious RPi wifi problem -- No wireless interfaces found
Alright, I have been unable to find a solution to this problem anywhere else online, so please bear with me:
I have a new Raspberry Pi Model 2B which came with a wifi dongle (Ralink RT5370) and when ...
6
votes
1
answer
2k
views
Dial up HSF usb Conexant modem linux driver for ARM architecture
Hello I've being trying to install my usb HSF Conexant dial up modem to my Raspberry PI 2 B which is running Raspbian OS. I checked a company named Linuxant that makes these kind of drivers but ...
5
votes
1
answer
3k
views
Problem with QinHeng CH9200 driver - Pi 2 (4.1.7-v7+)
English is not my native language so please be patient.
I'm using a Rasp and the Ethernet port is already taken, so we bought a USB2.0 to Fast Ethernet Adapter, like this one: https://www....
1
vote
1
answer
2k
views
Installing ESP8266 SDIO driver; "make" command gives "Kernel build tree not found" error
I'm attempting to add a kernel module on a Raspbian Debian installation for an SDIO-based wifi module driver( found here: https://hackaday.io/post/28712)
The stable image comes with kernel 4.1, so ...
2
votes
2
answers
277
views
Stepper Motor Not Responding. Wiring Issue?
I am following the tutorial: But I am using a pi t-cobbler and a Pi 2. I am also using the ULN2803 driver.
When plugging a button into the appropriate gpio spots on the breadboard, I am able to run a ...
0
votes
2
answers
4k
views
Alfa AWUS036NHA not recognized as interface
Since today my wireless network adapter refuses to work. Yesterday everything worked perfectly fine but for some unknown reason it stopped working. When I plug in the device I get a very limited ...
0
votes
1
answer
3k
views
Where do i get drivers for a BCM 43143 dongle
I have a WiFi dongle which has a BCM 43143 chipset
I'm running Raspbian Wheezy on my raspberry pi and I've tried everything I found on the internet to fix it the WiFi connection problem
I can find the ...
1
vote
1
answer
5k
views
Using an I2C Battery Fuel Gauge Device Driver
I have connected the TI-make battery fuel gauge and charger to the I2C port of my raspberry Pi and eventually plan to control them using RPi. I have some minimally working code. However, I found a few ...
8
votes
1
answer
2k
views
How to write device tree overlay for analog device touchscreen ad7879 i2c
I wrote a device tree overlay for driver ad7879-i2c touchscreen (compiled as module using Raspberry Pi source, files: ad7879-i2c.c, ad7879.c). Driver gets loaded but i guess parameters are not passed ...
2
votes
0
answers
362
views
Why aren't the current kernel headers available via apt-get
I am trying to compile some usb drivers for the pi and therefore, I need to get the headers that correspond to my present kernel
uname -r produces 4.1.7+
Based on my experiences with Debian and ...
3
votes
1
answer
7k
views
RPI2 Kernel module compilation (kernel 3.18.11+ vs 3.18.11-v7+)
I want to recompile a kernel module/driver on my RPI2 for my RPI2.
The command uname -a gives me:
Linux cpf 3.18.11-v7+ #781 SMP PREEMPT Tue Apr 21 18:07:59 BST 2015
armv7l GNU/Linux
Q1) What ...
15
votes
2
answers
19k
views
Enable monitoring mode for RTL8188CUS via USB on Raspbian
I am trying to enable monitoring mode for a USB wifi dongle with the RTL8188CUS chipset on a raspberry pi model b+ (or any raspberry pi for that matter).
$ lsusb
Bus 001 Device 005: ID 0bda:8176 ...
1
vote
0
answers
897
views
Why did my stepper motor drivers fry my Raspberry Pi 2
Just fried a raspberry pi 2 using 4 of Big Easy Driver's from Sparkfun. Would love to know why it happened and how I can fix it.
Here is a link to the stepper motor drivers I'm using. This page links ...
1
vote
0
answers
393
views
problem with driver when upgrade to jessie
I upgrade my Raspbian from Wheezy to Jessie. now when I want use Gstreamer, I face the following error:
libva info: VA-API version 0.36.0
libva info: va_getDriverName() returns -1
libva error: ...
0
votes
1
answer
366
views
Install.sh asking for password in driver installation
I am trying to install driver for wifi adapter on my headless Rpi(I am a complete newbie), Whilst trying to install in LXterminal it asks for password, I can't figure out which password its asking, ...
1
vote
1
answer
587
views
Set up on Adafruit Motor Hat
I recently bought the Adafruit Stepper Motor Hat, installed the software as per the instructions, and while it works flawlessly when running the DC motor, it will only turn the stepper motor in one ...
2
votes
2
answers
2k
views
Is it possible to build a Raspberry Pi yourself?
As covered in this question, the Raspberry Pi isn't open source. However, if one were to manually buy all the components on the board and solder them in an identical manner, what further steps would ...
7
votes
3
answers
56k
views
White screen on touchscreen display
I connected my 3.5" touchscreen display to the raspberry and nothing appears on it.
When I start the raspberry, only the white screen appears and doesn't disappear.
However, connecting an external ...
0
votes
2
answers
2k
views
Wifi adapter detected but doesn't work
I started my Raspberry Pi 2, connected to an external monitor. Everything works as supposed.
I connected my USB Wifi adapter and it's being detected by the pi:
$ lsusb
...
Bus 001 Device 04: ID 0bda:...
0
votes
1
answer
2k
views
Problem in 'make' for installing CP210x driver to my Raspberry Pi
My kernal version is 3.18.11-v7+. Since the kernels from the Raspberry Pi Foundation kernels don't ship with a build directory, I installed the Debian-style package, which should include the build ...
1
vote
1
answer
4k
views
PiTFT 320x240 Capacitive Touch and Raspberry Pi 2
I accidentally purchased the 320x240 Capacitive Touch (rather than the newer model) with my new Raspberry Pi 2, and I can't get the screen to work. I have tried using both stock Raspbian with the ...
0
votes
2
answers
757
views
Connecting a SainSmart 9-in HDMI Touchscreen?
What's involved in connecting a SainSmart 9 inch HDMI touchscreen to a Pi? There seems to be a lot involved in getting any touchscreen working, with not much information out - and some of that ...
0
votes
1
answer
130
views
Stepper motor ROB-09238 & RPi2 what driver do I need, really need one?
I am a bit noob with all kind of stuff. I have seen that the ROB-09238 is 'famous' and I want to manage it with the RPi2.
Technically do I really need that, two L9110H can make the work?
and what ...
1
vote
3
answers
6k
views
Problems FT5306 USB Touchscreen
First of all, sorry for my terrible languache.
I bought 7" display with usb touchscreen from Eleduino. It works fine with Raspibian distros presented by vendor, but I want to connect it to my RPi B+ ...
2
votes
1
answer
768
views
si7013 driver install raspberry pi
I bought a Silicon Labs si7013/20/21 usb dongle and now I'm trying to install it onto a raspberry pi 1 running raspbian with kernel 3.18 +
I compiled a kernel after adding the drivers to drivers/...
6
votes
3
answers
6k
views
Compile linux module on Raspbian error
I am trying to compile a simple helloworld module on my Raspberry Pi B+ under the 3.18.7+ Kenel. I did it after THIS tutorial.
When I try to build my module I have this error :
make[1]: *** /lib/...
-1
votes
1
answer
56
views
libacsccid1_1.1.0-1~trusty1_armhf.deb or similar version for Ubuntu trusty 14.04
I have an NFC reader ACR1251U-A1, and I'm trying to install the driver for my NFC reader.
In the folder that I have downloaded from the provider's website, there are only libacsccid1_1.1.0-1~trusty ...
1
vote
1
answer
452
views
Raspberry Pi as a PS3 controller
I want to make my raspberry pi to automate GT6 B-spec when I am away from my PS3 however, I cannot find a way how to get my raspberry pi to act as a PS3 controller (I have only found how to use my ps3 ...
5
votes
2
answers
25k
views
Raspberry Pi Recognizes Logitech C920 Webcam But Can't Do Anything
Running Rasbian OS on Raspberry Pi B
From dmesg:
[139215.134634] usb 1-1.3: new high-speed USB device number 7 using dwc_otg
[139216.356892] usb 1-1.3: New USB device found, idVendor=046d, idProduct=...
1
vote
4
answers
14k
views
Drivers for TP-LINK TL-WN723N v3
I need the drivers for my wireless adapter (TP-LINK TL-WN723N v3). I googled a lot, but could not find latest drivers. All I could find were the drivers for TP-LINK TL-WN725N.
My raspbian version is 3....
1
vote
2
answers
634
views
Compiling TV Card Drivers on Raspberry Pi 2
I own an August DVB-T208 Freeview TV Receiver. I would love to attach this tuner to a Raspberry Pi running OSMC. However, on the drivers page on their website, there are Linux drivers for this device ...
0
votes
0
answers
385
views
SPI problem when install CAN controller driver
I updated my raspi to 3.18.7+ last days and i also need new driver for my modules. I was waiting for PICAN board driver for pi and yesterday i uploaded it. Before uploaded;
ls -al /dev/spi*
crw-rw---...
0
votes
1
answer
2k
views
Mouse flickering on certain programs
I have the raspberry pi 2 with a hdmi - vga monitor running Raspian.
On programs like gimp and things I made in my game, my mouse keeps flickering if I move it across the screen, and if I don't move ...
0
votes
1
answer
724
views
Analog psp thumbstick not working with analog to digital converter on Pi model 2
I am working on a portable RPI 2 retropie (another version of Raspbian) powered game console.
I have bought an analog psp thumbstick, and an mcp3002 analog to digital converter, that I want to use for ...
1
vote
0
answers
46
views
Developing drivers for HATs: is this a good practice?
I have designed a few HATs. Now about driving it, does this sounds like a good way doing it? The architecture described below is the driver layer designed for my custom kernel, but a stripped down ...
2
votes
2
answers
13k
views
"Inappropriate ioctl for device" error since upgrading Rasbian & firmware
I was happily controlling Shiftbrite LEDs using SPI and Python based on this code
Today I upgraded my Pi using
sudo apt-get update && sudo apt-get dist-upgrade
sudo rpi-update
Now my script ...
0
votes
2
answers
2k
views
DWA-171 using 8812au.ko does not seem to work on Linux kernel version 3.18.8+
I have already tried the procedure described in (Drivers for dwa-171 wifi usb dongle) on several RPi's without success. Each attempt fails at the end of the process with "ERROR: could not insert '...
1
vote
4
answers
2k
views
TL-WN725N v2 WiFi adapter not working on Raspberry Pi Arch Linux
I have a TL-WN725N v2 WiFi adapter and I can't get it working on Raspberry Pi running Arch Linux. Linux kernel version is 3.18.5-1-ARCH #1.
Some time ago, to make this adapter working, it was ...
2
votes
0
answers
3k
views
Why I cannot read the temperature / humidity sensor SHT20?
I use a temperature and humidity sensor sht20. According to this link: http://www.sensirion.com/en/products/humidity-temperature/humidity-temperature-sensor-sht2x/ It is compatible with sht21, which ...
0
votes
2
answers
3k
views
Do we need to put i2c code into kernel?
I see codes to make i2c device (e.g. i2c sensors) work in user space, just need kernel to support /dev/i2c-0 or /dev/i2c-1.
But whether do we need to put the codes into Linux kernel? For example, if ...
0
votes
2
answers
182
views
Error when running a program to test library that write values on GPIO
I tried to write a Linux driver that writes and reads values to and from GPIO pins. Also, to test the driver I wrote a small shared library ( somehow based on bcm2835 library, I took from there the ...
1
vote
1
answer
705
views
Do I need a soft-float/"armel" installation to run a soft-float/"armel" driver?
I want to set up a Raspberry Pi as a network endpoint for the USB-only Samsung SCX-4521F multifunction printer/scanner.
To achieve that, I believe I'd need to install the Samsung Unified Linux Driver ...
1
vote
2
answers
9k
views
Drivers for dwa-171 wifi usb dongle
I'm having trouble to compile and use drivers for dwa-171 wifi usb.
I have tried a lot of things but currently i'm unable to load module.
Recap of what i have done so far:
Getting kernel sources:
...
2
votes
3
answers
11k
views
Compile linux device driver in Raspbian
I have some problems with compiling & building a simple gpio driver that I wrote( after THIS documentation). I have a Raspberry Pi Model B+ ( not sure if it's relevant to the question) with a ...
3
votes
1
answer
6k
views
RTL8192cu wifi Authentication request to the driver failed
The device is being picked up by my pi. I also checked to make sure the 8192cu module is being loaded by the kernel as well. But I simply cannot connect to my wifi. I have tried multiple methods. I ...
1
vote
0
answers
1k
views
Using motionPie: I'm stuck trying to install a camera driver
I'm trying to set up a raspberry pi for these tasks:
streaming video over a network
listening to commands (I'm not yet sure how to do that) over network
parse commands and control a slave connected ...
17
votes
4
answers
16k
views
Kernel .config necessary options
I'm interested in compiling a custom kernel for the pi. I have the source from the github archive, which includes a make target for a default configuration:
make ARCH=arm bcmrpi_defconfig
But (as ...