Questions tagged [ethernet]

Ethernet is a family of wired computer networking technologies for local area networks (LANs).

Filter by
Sorted by
Tagged with
1
vote
1answer
27 views

Direct Ethernet IPCam and Wifi for browsing - Networking setup

I would like to connect 2 ipcams via a switch to the RPI 3B+, and use the WiFi to connect to a router (to use the webbrowser etc), and also use the router for VNC The ethernet is used to send ...
0
votes
0answers
35 views

How to use Ethernet and Wifi on Pi3b+ and Raspbian buster

Yes, I am aware that similar questions have been asked before on this StackExchange but almost all of those are old and don't seem to be working for me. After googling around I found that things have ...
1
vote
0answers
23 views

Openvpn client issues

I have configured my RPI3 B with debian 9 (stretch) as a openvpn client. systemctl status openvpn ● openvpn.service - OpenVPN service Loaded: loaded (/lib/systemd/system/openvpn.service; ...
0
votes
1answer
26 views

I want to give Internet to the Raspberry Pi via PuTTy

I can't connect the Raspberry Pi to the internet due to VLAN vulnerabilities. I can connect the Raspberry Pi via Ethernet just in the network to connect to PuTTy. I want to connect the Raspberry Pi ...
0
votes
0answers
13 views

How to automate network login on a college lan(ethernet) connection?

I have a raspberry pi 3B connected to a lan port in college hostel room. Before, being able to access the internet, the connection requires the user to login using credentials given to the students by ...
2
votes
0answers
43 views

RPI as default gateway

I would like my raspberry to work as a gateway for LAN devices and connect to Internet. Now the default gateway is my router connected to ISP provider. Basically I would therefore like to share the ...
0
votes
0answers
15 views

(ENC28J60) Is the PHCON1.PDPXMD register set by the driver?

I am trying to add an ENC28J60 (ethernet controller with SPI interface) to my Raspberry Pi Compute Module board. In section 2.6 the datasheet explains that the full duplex / half duplex mode is set by ...
0
votes
0answers
25 views

Raspberry Pi Date and Time wrong with using both Ethernet and WiFi

Update I resolved the issue. My static ip address had a default gateway set. Once removed the issue was fixed. I have a Raspberry Pi that I use in headless mode, and it has been configured to ...
0
votes
0answers
21 views

Ethernet options for streaming video from a Raspberry Pi Zero?

I am streaming video from multiple Pi zero WHs, via ethernet, to a master Pi 3B+ which saves the streams to a hard drive. I chose Pi zeros due to their low cost and low power draw (I'm running from ...
0
votes
0answers
27 views

Communicate between two Raspberry Pis using USB-Ethernet cable

I have two raspberry pis I want to communicate between. For convenience, let's say one is always the talker and the other is always the listener. The listener's ethernet port is occupied by another ...
2
votes
0answers
46 views

Is it possible to connect a Raspberry Pi 0 to the USB port of a router, to connect to the internet?

Recently I read (in articles such as this one) that it is possible to use the Raspberry Pi Zero in 'USB/Ethernet gadget mode'. Now my modem has two USB ports, which the manual says can be used for ...
1
vote
1answer
36 views

isc-dhcp-server can't bind to dhcp address

I'm trying to set up an ethernet DHCP server on a Raspberry Pi to connect one device via eth0 and give it an ip address, but I cannot for the life of me get the service to start. This won't be an ...
0
votes
0answers
20 views

Wlan0 Access Point goes down with Eth0 DHCP Client and Wlan1 Dongle DHCP Client

I'm trying to set up an Access Point on Wlan0 with Enet0 and Wlan1 (wifi dongle) as DHCP clients. I followed two excellent answers to set up AP with either eth0 or wlan1 as a client. Setting up a ...
0
votes
1answer
25 views

Connect a RPi with an android device directly via Ethernet

For a certain project I have a very specific need to connect a Raspberry Pi with an unrooted android tablet through a UTP cable (with an adapter on the android side). Both of these devices work fine ...
0
votes
1answer
44 views

Facing issue in ethernet configuration for Raspbian

I am trying to enable AP and Wireless client on the Raspberry Pi 3 b+. I have installed Raspbian Stretch from the official website. To achieve the above objective I found an answer here which ...
0
votes
2answers
53 views

raspberry pi 3 - connecting multiple pi's via ethernet problem

I'm trying to connect three raspberry pi 3 B+ together via ethernet. All three are connected via wlan0 to my wifi network for internet. All are connected via ethernet cables to the same desktop switch,...
0
votes
1answer
34 views

How to connect to raspberry pi on ubuntu [duplicate]

I cannot seem to get an ethernet connection to the raspberry pi from ubuntu. It does not find the pi on ifconfig. The ip address of the raspberry pi is static, so should be 192.168.1.23. When I ping ...
4
votes
1answer
157 views

Building a 'Packet squirrel" using Raspberry Pi

I recently read about hack5s' Packet squirrel, and now I am interested in building a similar device that sits between 2 endpoints (say router and PC) and monitor all the traffic but be invisible to ...
0
votes
0answers
61 views

setting up multiple IP addresses on one ethernet interface?

I am running Buster on a RP3B+. It is configured as a stand-alone wifi access point running dnsmasq. No bridging to the eth0 / Internet. It also has a wired eth0 interface. Everything is working ...
1
vote
1answer
80 views

Created a Raspberry Pi 3B+ Wireless Hotspot, how can I extend the hotspot via Ethernet

I have successfully created a WiFi hotspot for my RPi 3B+ using a Hologram Nova and the embedded WiFi card on the Pi. However I realized that the ethernet interface has disappeared and cannot extend ...
3
votes
0answers
90 views

What sort of throughput is achievabe over the USB 3.0 port on the Pi-4?

Looking to run a router application on the rPi-4, and was wondering if anyone has experience using usb 3.0 -> gigabit ethernet adapters on it - specifically what adapter/chipset worked with what ...
1
vote
0answers
61 views

Facing issue in loading Ethernet Interface for Raspberry Pi 3 B+ buildroot

I am building a Custom OS using Buildroot. I am following this article to build the custom os. Author of that article gave a sample image of the os that will be created after the build is completed. ...
0
votes
2answers
59 views

Ethernet communication Raspberry PI and windows PC

I am working on project which involves sending datastream from raspberry pi to Windows PC. This should only be done through Ethernet link. I looked for ethernet libraries but i did not find any. Also ...
0
votes
1answer
114 views

How can I set my pi 3 up to be WiFi AND ethernet router simultaneously?

I want to use my Pi as a fully fledged wifi and ethernet router. I'll connect an external modem/phone with tethering to it and want to share that internet connection with all devices connected to the ...
0
votes
0answers
10 views

Suddenly halt when updating the raspi zero

I am updating the raspi zero (sudo apt-get update)via USB OTG Ethernet via my laptop internet but suddenly my terminal which connected to raspi zero hang and don't respond you could see in this pic ...
0
votes
2answers
24 views

Headless bootup diagnostic to see why no network

I've got the latest hardware (rpi 3b+) and am trying to get a flavor (ev3dev) to run on it. However, it never connects to the network - either ethernet or wifi. I looked into how I could capture ...
1
vote
2answers
45 views

Advice on how to use a RPi to connect Smart TV to the internet via wireless

I have a Smart TV that has ethernet but no wireless capabilities. I also have a spare RPi1 (Model B) with a wireless USB adapter. Is there anyway I can use the Pi to connect the TV to my wireless ...
1
vote
4answers
171 views

Connecting Raspberry Pi Zero W to ethernet and serving as WiFi access point

I have an ethernet port in a room where I would like to improve the WiFi connection, and I have a Raspberry Pi Zero W lying around. Is there a way I can connect the Pi to the ethernet port and have ...
1
vote
0answers
54 views

Where is my /etc/dhcpcd.conf file?

I am running Linux mop-raspberrypi-01 4.19.42-v7+ #1219 SMP Tue May 14 21:20:58 BST 2019 armv7l GNU/Linux and all tutorials for setting a static IP address for the Pi mention editing /etc/dhcpcd....
0
votes
0answers
44 views

Can't SSH into RPi from Mac Using Direct Ethernet Connection

I am completely new to the Raspberry Pi - I was bequeathed a 4yo RPi 3 and am trying to setup Kali. I have temporary access to a TV I can plug it into but will soon be leaving to go back home where I ...
0
votes
0answers
33 views

Using Pi as an intermediary between 2 LANs

I have one raspberry pi which is running Hassio (Home automation stuff). Normally I would just connect the devices I wanted to automate to home LAN but the problem is my wifi SSID & Password might ...
1
vote
1answer
61 views

Network error: Connection timed out while connecting raspberry Pi via SSH using putty

I am trying to connect Raspberry Pi with my laptop so that I may use my laptop mouse, screen and keyboard but its giving me error Network error: Connection timed out These are the steps I have ...
1
vote
2answers
91 views

Network Ethernet and WiFi devices

I have device A and B. I need them networked together (see eachother on arp-scans etc). Device B has WiFi, but device A has Ethernet. Basically I just want the Pi to act like a simple router (maybe ...
0
votes
1answer
47 views

RPi 3B+ Ethernet crashes TP-Link Archer C9

When I use the ethernet connection on my RPi 3B+ my Archer C9 (TP-Link router) works fine for 20-30 minutes then crashes and reboots indefinitely until the RPi ethernet is disconnected. The RPi and ...
2
votes
2answers
105 views

Access point with 2 Internet connections. Switching interfaces problem

I have: Raspi 3b+ 1st internet connection on eth0 through built in adapter 2nd internet connection on eth1 through a USB-dongle I followed the official manual and the AP is running just fine. What ...
0
votes
2answers
52 views

First time setup with ethernet connection

I have just bought a Raspberry Pi 3B+ and want to setup by connecting it to my Macbook Pro via Ethernet connection. I can ping the raspberry pi IP address $ ping raspberrypi.local PING raspberrypi....
1
vote
1answer
60 views

RPI is not visible in LAN when using ethernet over usb

I'm following this tutorial for converting RPI to usb gadget. I've modified setup script a little to fit my needs: err_file=$HOME/usb_setup_err echo "Time: $(date -Ins)" >> $err_file echo '...
0
votes
0answers
14 views

Extremely low connection to my projects from WAN

I own a Raspberry 3 b+ connected by WiFi. I'm storing my Codeigniter (php) projects there, but it takes a very long time to load any of these projects from WAN. I'm using NO-IP to access the ...
1
vote
0answers
36 views

Network boot multiple Rasperry Pis

I am looking into SD cardless network boot options for a bunch of RPis. I would like them to all boot from one server, which should provide either of two images to the raspberry, as well as an ...
4
votes
1answer
38 views

Forward AP wlan0 to eth0 not working

I've recently boute a raspberry pi and wanted to create an additional wlan access point for my router. So what I did is, I followed this tutorial: https://adityashrm21.github.io/Raspberry-Pi-Packet-...
0
votes
1answer
112 views

Adding a USR-ES1 W5500 chip for Raspberry 3 A+

I am currently thinking about a project in which space should be kept to a minimum. Now I am using the A+ model because it is smaller however I do need an ethernet port. So what I am planning to do ...
0
votes
0answers
20 views

LAN9514 non-standard configuration

We're trying to configure the 9514 on the Compute Module. Where should I start looking to disable LAN9514 auto-negotiation and set full-duplex at 100Mbps? We looked through the LAN9514 datasheet, ...
1
vote
2answers
142 views

Static IP Issues For wlan0 and eth0

I'm having issues with using a static IP for a Raspberry Pi 3. What I'm trying to do is connect 4 Raspberry Pis as nodes/slaves to a single Pi which will act as the server/master. I'm using OSC ...
0
votes
0answers
13 views

Low internet speed when connected to ethernet

I'm experiencing slow internet with my raspbery pi 3 B+ My internet speed is 200 Mb/s I can test it with my mac. Basically, I try to download this 1 GB File On Mac with both ethernet and wifi, I ...
1
vote
1answer
165 views

Steam Link app network problems

I setup an Pi 3 (B+) for connecting to steam on my main computer. Steam Link is an application used for connecting remote devices (like the pi) as client with steam on the host computer (https://store....
1
vote
2answers
318 views

Raspberry Pi 3 B+ to Samsung Galaxy S7 USB Tethering Inactive eth1 Interface

This is a follow up to Static IP Address for USB Screencast in Raspbian Stretch. Concisely, I want to use USB Tethering to connect VNC on my smartphone to the RPi for use as a remote desktop-type ...
1
vote
1answer
95 views

Bridge and Wifi Webserver on Raspberry Pi 3 B+ (Raspbian Stretch)

So I am trying to realize the following Setup with a Raspberry Pi 3 B+ (latest Stretch Lite): Modbus TCP/IP Device with a static IP Adress connected to the Raspi Pi via Ethernet. Raspberry Pi ...
1
vote
0answers
25 views

Ethernet speed: Screen ON vs screen OFF

I've a Raspberry Pi 3 B+ with Ubuntu 18.04 installed. With an SSH connection with my Kubuntu PC, the transfer is good (4.5Mo/s) when RPi's screen is OFF (via xset dpms force standby) but if the RPi's ...
1
vote
0answers
15 views

Wifi stops working (on my laptop) after connecting rpi as ethernet gadget

So I am using a raspberry pi zero W as an ethernet gadget. I got ssh working and the RNDIS/Ethernet Gadget thing working so I can log into the pi using pi@raspberry.local. I even got VNC to work so ...
1
vote
1answer
57 views

Unable to exceed 100Mbps over 3B+ Ethernet link

I have an rpi 3B+ running Raspbian connected to a gigabit switch, and a Debian machine on the same switch. Both systems negotiated a gigabit link to the switch: $ sudo mii-tool eth0 eth0: negotiated ...