As of May 31, 2023, we have updated our Code of Conduct.

Questions tagged [ethernet]

Ethernet is a family of wired computer networking technologies for local area networks (LANs).

209 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
3 votes
3 answers
444 views

Raspbery Pi 3B+ - My USB ports don't work, but ethernet does

This is a pretty short question. My ethernet port works, but none of the usb ports seem to do anything when I plug anything in them. This is the case with a fresh raspi os image. How can I debug this?
S. ten Brinke's user avatar
3 votes
1 answer
1k views

Raspberry Pi Internet Issues

On my raspberry Pi 3B, attempting to access the internet for downloads fails. Anything that uses it (chromium, apt-get, etc) does not work, giving errors such as DNS server not found, or just hanging. ...
Fuzzyzilla's user avatar
3 votes
0 answers
405 views

Networking - Two Raspberry Pis communicating over wired connection

As a part of my research I need to have two Raspberry Pis and a Pixhawk all within the body of a UAV. I know I can get one Pi connected to the Pixhawk over mavlink, but how can I get the two Pis ...
Rob Thomas's user avatar
3 votes
0 answers
170 views

Having issues with ethernet connection

I was trying to use apt-get update and it didn't work because the pi wouldn't connect via ethernet (even though it is plugged in). I tried pinging google but it says network is unreachable. I checked ...
Brandon's user avatar
  • 31
2 votes
1 answer
192 views

Connecting two Pis in ethernet

I wanna connect two RPis together with an ethernet cable. I did it and test with ping function and it works, I can communicate. But for my task I have to be sure that the IP addresses are static on ...
Dark Patate's user avatar
2 votes
0 answers
60 views

Multiple RPIs to 1 PC communication with CAN BUS

I have to establish multiple RPI(Let's say 2-3) to 1 PC communication. I have to set up a CAN bus in either the PC or RPI. I am considering using an Ethernet cable and setting up a python server on ...
Farhan Kabir's user avatar
2 votes
0 answers
181 views

Trying to create low-latency audio stream with USB input to ethernet output

I'm trying to route audio coming from a tv to my Sonos speaker using a USB audio capture card (tv aux to Raspberry Pi USB input). I'm planning on using the ethernet port on the Raspi to output the ...
Sean Dever's user avatar
2 votes
1 answer
328 views

Tethering Pi to Computer for Internet

Good Evening, Ideas- I'm operating at work so I'm very limited to my "lab" to play around with stuff. Anyway- here's what I've got- Ubiquiti EdgeRouter 8 Raspberry Pi 4 Windows 10 Machine (with VNC, ...
sassriverrat's user avatar
2 votes
0 answers
90 views

Connect to a proxy server but only from specific interface (eth0)

I want to connect my Raspberry Pi to the university network. I was successful to connect it to eduroam (WLAN). Some times I would also like to access the universities network over LAN. For doing so, I ...
elyptikus's user avatar
  • 121
2 votes
0 answers
350 views

RPI as default gateway

I would like my raspberry to work as a gateway for LAN devices and connect to Internet. Now the default gateway is my router connected to ISP provider. Basically I would therefore like to share the ...
andrewz's user avatar
  • 51
2 votes
0 answers
572 views

Is it possible to connect a Raspberry Pi 0 to the USB port of a router, to connect to the internet?

Recently I read (in articles such as this one) that it is possible to use the Raspberry Pi Zero in 'USB/Ethernet gadget mode'. Now my modem has two USB ports, which the manual says can be used for ...
Qqwy's user avatar
  • 141
2 votes
0 answers
1k views

Trying to use Ethernet over Bluetooth between Pi boards

I'm trying to use SSH over Bluetooth via Ethernet over Blutooth. I've based my effort thus far on: Bluetooth PAN Network Setup with BlueZ 5.X I believe I have faithfully followed the instructions. ...
jski's user avatar
  • 141
2 votes
1 answer
1k views

Raspberry Pi Wi-Fi AP problem: no network and internet access on the Pi, though got them on Wi-Fi

I decided to use my Pi as a WiFi-AP, and followed the manual here: https://thepi.io/how-to-use-your-raspberry-pi-as-a-wireless-access-point/amp/ I did not setup a DHCP server though, because my ...
Pavel Topouzidis's user avatar
2 votes
3 answers
14k views

Pi Won't Connect to Ethernet or WiFi

EDIT: This is a brand-new Pi 3 board running raspbian I just got my Pi, and for whatever reason I can't access the Internet. Ethernet will try and configure forever, and when I try to connect to ...
Christopher's user avatar
2 votes
0 answers
2k views

How to connect multiple Pi Zero ethernet gadgets to a Pi 2?

I followed this guide to turn my Raspberry Pi Zeroes into ethernet gadgets and I did not change anything in the /etc/network/interfaces or /etc/dhcpcd.conf files. All of the SD cards were fresh ...
Vtor's user avatar
  • 21
2 votes
0 answers
1k views

Pi Ethernet to USB router

My company has given me a project where I need to provide internet access to a PC via a USB cable connected to the RPi (Model B), which in turn is connected to the router via Ethernet. I have in my ...
ubermensch's user avatar
2 votes
0 answers
641 views

Wifi shared through ethernet cable [Ubuntu]

I have a laptop connected to wifi. I would like to connect my Raspberry Pi to it with an ethernet cable and have access to internet thanks to the laptop connection. I have found a lot of partial ...
Shinagan's user avatar
  • 129
2 votes
0 answers
1k views

Can't connect to Raspberry Pi with Ethernet

I've configured my Raspberry Pi so I can connect to SSH, and the first few days it worked flawlessly. Now yesterday and today, I couldn't connect to it so I tried to ping it. I kept getting: ...
user104289's user avatar
2 votes
1 answer
1k views

Ethernet not working when powered over GPIO

I'm powering my RPi (rev 2, model B) through GPIO pins - same connection like here - using it ethernet is not working, though the ethernet works fine when powered through the microUSB port. The ...
Simon Berka's user avatar
1 vote
0 answers
25 views

How to setup ip addressing on 2nd pi network interface

I have rasp pi 3 and I purchased this usb ethernet adapter: https://www.amazon.co.uk/gp/product/B00M77HLII/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 The device was detected by the pi ...
Angus Comber's user avatar
1 vote
0 answers
44 views

Raspberry ethernet problem

Hello I have a Raspberry 2b model of 2014 it has no wireless internet system so I'm with having a ethernet. First I tried to connect it to my laptop via Lan, because having no monitor and the wifi ...
REM's user avatar
  • 21
1 vote
1 answer
85 views

RaspberryPi 4 access ssh on first time setup without changing boot data

I recently got RPi 4 kit and I want to connect to its terminal interface using Ethernet cable from my laptop. I dont have any SD card reader on my laptop so I cannot change data on microSD. That ...
ThomasCodesThings's user avatar
1 vote
0 answers
168 views

Pico-ETH-CH9121 complete use case example

I purchased Waveshare's Pico-ETH-CH9121 and followed the instructions at https://www.waveshare.com/wiki/Pico-ETH-CH9121. Unfortunately, I do not understand what to do to establish a TCP/IP connection, ...
Twonky's user avatar
  • 113
1 vote
0 answers
45 views

Unable to connect to any of the torrent indexers

I have freshly setup DietPi on my Raspberry Pi 4 (4 GB). I had the same DietPi set up earlier for months and it worked fine but after this fresh installation, I am unable to connect to any of the ...
N_H1922's user avatar
  • 111
1 vote
0 answers
252 views

Raspberry pi ethernet light blinking a color when connected to laptop

I have received a Raspberry Pi 4 Model B, and have been using it for several weeks. I had installed OpenWRT(21.02.1) on one of my MicroSD cards and had put it into my pi. I don't have an external ...
Chinatown's user avatar
1 vote
2 answers
222 views

Share internet connection from a pi 4 to a pi 0 non W via USB

I connected a raspberry pi 0 to a raspberry pi 4b+ via USB and i would like to know how can i share the internet connection. The pi4 is connected to the internet via the ethernet port. P.S.: I did all ...
F G B's user avatar
  • 11
1 vote
0 answers
164 views

Use WiFi as "local" hotspot and ethernet for Internet access

Using a Raspberry Pi 3, I would like to have a "wifi hotspot" (without internet connection) to connect my computer to it and use some applications (locally). From time to time, I would like ...
LinkOut's user avatar
  • 11
1 vote
0 answers
310 views

Cannot ssh raspberry zero over ethernet using adapters (Micro USB to usb and usb to ethernet)

I have: Raspberry pi zero with one micro HDMI port and 2 microUSB (1 for power and the other for general purposes) One Power Supply 2.1A (which I thought should be connected to the power microUSB One ...
wannaKnowItAll's user avatar
1 vote
1 answer
286 views

Problem in connecting my Arch linux to My raspberry Pi (raspbian)

I am having problems connecting my Arch to Raspberry Pi 3 via ethernet. I am having Realtek r8169. Though internet is working but when I connect it to my Raspberry Pi, it shows wire connecting The ...
Mann's user avatar
  • 11
1 vote
1 answer
1k views

IPv6 not reachable

I have this strange bug on my Raspberry PI that my public IPv6 is not working (sometimes!). When I restart my Pi the IPv6 gets assigned and I can reach my Pi from the internet. However and some point ...
jwillmer's user avatar
  • 111
1 vote
0 answers
350 views

Lost connection to USB device through USB hub

After some physical interference, like moving a bit the USB cable connecting the USB Ethernet card to USB hub, it looses connection -- it's no longer visible in the system, despite the green diode is ...
ibpop's user avatar
  • 11
1 vote
0 answers
212 views

Share raspberry pi ethernet connection via bluetooth

So, basically I'm moving into a new flat for university and the only possibility to get internet access currently is through ethernet ports. I know you can do bluetooth tethering to get your ...
user124218's user avatar
1 vote
0 answers
520 views

Device Tree for DSA with KSZ9897

I have a custom board with a KSZ9897 switch chip and a LAN7801 upstream. The KSZ9897 is connected to the Compute Module via i2c, and I can see it at 0x5f using i2cdetect. Everything appears to be ...
calcinai's user avatar
  • 179
1 vote
0 answers
28 views

RaspberryPi3B does connect to wlan but not to ethernet

After a system update and reboot the Raspberry Pi stopped working on ethernet. When I run the command ifconfig I have the output returned for ethernet interface
Alessio_110's user avatar
1 vote
0 answers
19 views

Connect access point to RPi's ethernet port

I get a public wifi in my living room, which I would like to extend for the rest of my house. I have an Android phone, RPi 3b and Belkin N300 wireless router. The setup I have in mind is Public ...
Akshay's user avatar
  • 11
1 vote
0 answers
358 views

Slow transfer over wget and curl on RPi4

I have issue with curl and wget transfer speed on my new Raspberry Pi 4 1GB. Pi is sonnected to the router by ethernet cable. When I try to download for example a large test file or something from ...
krzysiej's user avatar
  • 111
1 vote
0 answers
1k views

Connecting via Ethernet VNC

So until now, I've been using VNC to connect to my raspberry pi 4 with my raspberry pi 4 being allocated an IP address through my router. Now I need to be able to connect to it via ethernet cable. ...
Alex's user avatar
  • 9
1 vote
1 answer
813 views

Configure Static IP For bridge connection

I am working on Raspberry pi 3B+ (Having Ethernet and wlan both). Currently i am trying to create a bridge connection between my Ethernet port and tap which i am using for other purpose. Below ...
user2800219's user avatar
1 vote
0 answers
301 views

Raspberry Pi Compute Module 3+ yocto usb ethernet found but not working

I've created my own very basic console distro with yocto and uploaded it to a compute module 3+. Everything works so far, but I am unable to access internet via the connected AXIS AX88179 Gigabit ...
Varyag's user avatar
  • 111
1 vote
1 answer
871 views

How to use Ethernet and Wifi on Pi3b+ and Raspbian buster

Yes, I am aware that similar questions have been asked before on this StackExchange but almost all of those are old and don't seem to be working for me. After googling around I found that things have ...
Curious66's user avatar
1 vote
0 answers
118 views

Openvpn client issues

I have configured my RPI3 B with debian 9 (stretch) as a openvpn client. systemctl status openvpn ● openvpn.service - OpenVPN service Loaded: loaded (/lib/systemd/system/openvpn.service; ...
andrewz's user avatar
  • 51
1 vote
0 answers
123 views

Ethernet options for streaming video from a Raspberry Pi Zero?

I am streaming video from multiple Pi zero WHs, via ethernet, to a master Pi 3B+ which saves the streams to a hard drive. I chose Pi zeros due to their low cost and low power draw (I'm running from ...
KPM's user avatar
  • 216
1 vote
0 answers
333 views

Facing issue in loading Ethernet Interface for Raspberry Pi 3 B+ buildroot

I am building a Custom OS using Buildroot. I am following this article to build the custom os. Author of that article gave a sample image of the os that will be created after the build is completed. ...
Sharvin26's user avatar
  • 113
1 vote
0 answers
211 views

Network boot multiple Raspberry Pis

I am looking into SD cardless network boot options for a bunch of RPis. I would like them to all boot from one server, which should provide either of two images to the raspberry, as well as an ...
Whitecold's user avatar
  • 111
1 vote
0 answers
32 views

Ethernet speed: Screen ON vs screen OFF

I've a Raspberry Pi 3 B+ with Ubuntu 18.04 installed. With an SSH connection with my Kubuntu PC, the transfer is good (4.5Mo/s) when RPi's screen is OFF (via xset dpms force standby) but if the RPi's ...
Guillaume's user avatar
  • 111
1 vote
0 answers
30 views

Wifi stops working (on my laptop) after connecting rpi as ethernet gadget

So I am using a raspberry pi zero W as an ethernet gadget. I got ssh working and the RNDIS/Ethernet Gadget thing working so I can log into the pi using pi@raspberry.local. I even got VNC to work so ...
Josh Chung's user avatar
1 vote
1 answer
645 views

Raspberry pi Proxy ARP wifi bridge + extra ethernet adapter

Going through this thread: proxy ARP WiFi bridge Raspberry Ingo´s solution is working fine for me but I´m looking for an extra... With this WiFi bridge, I want to use an added USB-Ethernet adapter (...
user97491's user avatar
1 vote
0 answers
734 views

Raspberry Pi not seeing multicast traffic?

I have a setup in which one Raspberry Pi 3 is publishing ethernet multicast traffic and another Raspberry Pi acting as a subscriber. Both are on a wired connection, plugged into the same switch and ...
dapirateking's user avatar
1 vote
0 answers
733 views

Ethernet Indicator led on pi 3B+ not glowing

I am a newbie to Raspberry Pi and recently bought Raspberry pi 3 B+. I first downloaded and burn the minibian on sd card as some course suggested minibian. But whenever I connect pi with power, only ...
K_lash96's user avatar
1 vote
0 answers
60 views

hostapd - using Pi 3 as access point while maintaining Ethernet connection (no bridge)

Currently I have my Pi setup as an access point; It creates its' own network with an SSID and my other devices can connect and exchange messages. For this, I use hostapd and dnsmasq thru wlan0. ...
ChumiestBucket's user avatar

1
2 3 4 5