Podcast #128: We chat with Kent C Dodds about why he loves React and discuss what life was like in the dark days before Git. Listen now.

Questions tagged [internet]

The Internet is the global system of interconnected computer networks. It uses the Internet protocol suite (TCP/IP) to link billions of devices worldwide.

Filter by
Sorted by
Tagged with
0
votes
1answer
44 views

Over WiFi, I can establish a SSH connection but there is no internet connection

As described in the title, I can connect to my raspberry, via SSH connection, but raspberry has no internet access. All of this is done through an WiFi connection (Windows PC <--> Router <--> ...
1
vote
1answer
37 views

Sites unavailable ('Network unreachable') but pings work fine [closed]

I have a Raspberry Pi 2 Model B running Raspbian Buster (upgraded from Stretch). I don't use it very often, but recently I noticed that I can't do apt update because all the repos are unreachable (...
1
vote
1answer
47 views

Destination host unreachable, Pi not connected to internet

I'm using ssh to connect to the Pi from my MS Windows PC, and I'm using a wired connection to do so. Now the problem is even though my Pi is connected to wifi (which provides internet access), it ...
0
votes
0answers
30 views

Unable to access laptop's internet on Pi Zero over Usb

I've been going over so many web pages trying out numerous things for the past 6 hours to just get internet on my rpi to no avail hence I have come here to hopefully find a solution. Below are the ...
0
votes
0answers
31 views

Raspberry PI 3 B+ with 3G Pilot

Ive been trying to setup a 3G internet connection for my Pi using the Pi: PiloT. I keep getting and ERROR on the minicom window when i run the command AT+XCEDATA=1,0, in order to start an IP session.....
0
votes
1answer
37 views

How can I log all packets sent by connected devices over WiFi when using a Pi as a bridge? [duplicate]

I am using a Raspberry Pi 3B as a bridge between WiFi and another router in the network. My goal is to log all traffic (UDP and TCP) that's being sent by a connected device, such as a phone or a voice ...
0
votes
0answers
28 views

Share Internet with a Pi Zero over Bluetooth?

How do I share my Macbook's Internet connectivity with a Raspberry Pi Zero over a Bluetooth PAN? I am able to SSH into my RPi Zero via Bluetooth on pan0 interface, so the Bluetooth connection works. ...
0
votes
0answers
24 views

Internet slowing down at specific time in the morning

I am using a RaspberryPi 3B as a server to run a Telegram bot (using node) and I began to notice that after some time the bot takes ages to reply; so I downloaded speedtest-cli and setup a python ...
0
votes
0answers
27 views

RaspberryPI use with 3G/4G dongle

I've been looking into a project which would require me to enable my PI to have a remote internet connection. I'm wondering if the PI is able to use a 3G/4G dongle for this? If it can, does anyone ...
0
votes
1answer
31 views

I want to give Internet to the Raspberry Pi via PuTTy

I can't connect the Raspberry Pi to the internet due to VLAN vulnerabilities. I can connect the Raspberry Pi via Ethernet just in the network to connect to PuTTy. I want to connect the Raspberry Pi ...
0
votes
1answer
26 views

Raspberry 3B+ Can it be connected the same time for WiFi and for Ad-Hoc wireless network

Sorry guys, I'm not a Linux guru at all. So the problem: I have a general wifi in my office and there is Internet shared via this network I have a raspberry 3b+ device I could connect rpi to this ...
1
vote
1answer
71 views

Help in setup for RPi3 for internet connection sharing to eth0 and wlan0 (from eth1)

I have already setup the RPi3 for share my internet connection (from eth1 usb ethernet dongle) to my eth0 (Rpi3 internal ethernet port). The "ASCII diagram" is this: Internet -> Fiber Router (192....
0
votes
3answers
353 views

Can't connect to the samba server?

I am trying to set up a file sharing server on this here raspberry pi. The pi is running on Raspbian. I have it plugged in to my Google Wi-Fi router via Ethernet. SSH and ping are working fine, but ...
0
votes
0answers
31 views

How to start PPPD connection on boot and handle it in case of network failures?

I have to setup Quectel EC25-E hooked up to my Rasp Pi Zero. I can setup the ppp connection but manually. This is what I do: Quectel module ppp connection However, I have to make this pi headless ...
1
vote
0answers
42 views

Broken eth0 (not about strange name)

Well, when I got my RPi3B+ all was gud as it should be(probably). But now my Ethernet port just don't work. Many distros just don't shows eth0 (or neb24dfaw or how it...) (like with ifconfig -a) and "...
0
votes
0answers
81 views

How do you set up Squid Proxy behind DHCP router?

I installed Squid on my RPi-3 for use behind a DHCP router. However, the pi will not route traffic back and forth between my computer because my router's DHCP settings. I don't want to give my router ...
2
votes
0answers
41 views

Share Ubuntu Internet Connection With Raspberry Pi 0

I'm connecting to my raspberry pi zero over USB and SSH currently but would like to share my computer's internet connection to it over the same USB cord. I've seen people do it on Windows and Mac but ...
0
votes
0answers
15 views

Pi zero (USB Connected) ssh to it's dynamic IP don't work

I have connected my PI Zero to my Linux LMDE OS via USB cable so my setting for ding this shown below: as you can see when i find my pi IP i could not ssh to it's IP (sudo ssh pi@169.254.226.22 for ...
0
votes
1answer
238 views

Raspberry Pi Zero Internet connection through USB for linux OS

I connected my Pi Zero to my PC ( Linux LMDE 3 Cindy) via USB port successfully, SO i want to connect to internet via my laptop which is connected to internet by its WIFI. I found this instruction ...
0
votes
1answer
26 views

Get the default raspberry pi internet disconnection event

I'm working on a python script running on a script, which would upload some files to the server. Probably, this needs internet connectivity to be turned on. I'm seeing a log pi@raspberrypi dhcpd[5] ...
0
votes
1answer
799 views

Obtaining GPS & Internet together with Waveshare GSM/GPRS/GNSS HAT module

I'm using Stretch installed Raspberry Pi 3 B and Waveshare GSM/GPRS/GNSS HAT to obtain GPS real-time location and internet. What I have done : Used USB-UART interface and connected jumper Using ...
0
votes
1answer
16 views

I am having a problem connecting my Pi 3B to the internet wirelessly

I have recently bought a Raspberry Pi 3. When it prompted me to connect to my internet I entered the password but it just displayed failed to connect. So I tried an Ethernet cable and it worked, but ...
1
vote
1answer
21 views

Is it possible to preconfigure a WiFi before the Pi is on its range?

I have a program running on my Pi that needs to run in another household, without me coming to this household. The only thing needed is that the Pi is automatically connected to this household's WiFi ...
0
votes
1answer
406 views

Raspberry pi 3 ERR_NAME_RESOLUTION_FAILED wire

All of the sudden for no reason my raspberry stop access to the internet. I have reinstalled the OS and no help. Connect to the WiFi lan but does not connect and returns an error when wire line to a ...
0
votes
0answers
18 views

facing problem connecting the raspberryPi to internet

I am facing a typical problem of not getting the proper two way internet connectivity with my raspberrypi. I have connected the raspibian based pi to my router directly with an ethernet cable and I ...
3
votes
2answers
174 views

How to install updates without internet on Raspberry? [duplicate]

I want to calibrate my LCD screen, but i have no internet connection to my Raspberry Pi 2B. The terminal commands I would use with internet on the Raspberry Pi is cp LCD-show/xinput-calibrator_0.7.5-...
0
votes
1answer
98 views

Cannot ping Raspberry Pi 3 b+

My Raspberry Pi 3 b+ will not allow me to ping it even though I've ping'd and ssh'd into it plenty of times before now. I can ping my main computer from the pi but not the other direction. ping ...
0
votes
1answer
271 views

Accessing mobile phone hotspot internet from Raspberry Pi

I am able to connect my RaspberryPi to my android phones hotspot. The Raspberry Pi connects to the network successfully but does not have any access to the internet. Is there something else I need ...
0
votes
0answers
144 views

Chromium not launching

I’m new to raspberry pi, so I’m not sure if there’s some stupidly obvious fix to this, but chromium is refusing to load at all. I’ve updated everything through the terminal, and attempted to use ...
0
votes
0answers
26 views

Install USB Wifi to run in parallel on RPi 3+

This is a very similar question to one already asked, but it is different in that I want the USB dongle to provide internet access to the RPi while the RPi AP still operates. I am trying to set up a ...
0
votes
1answer
47 views

RASPBERRY PI 3 B+ internet access problem

A static Ip has been given for my raspberry pi from my company. That means if a connected to my office wifi network in anytime, the ip is 172.16.100.13 I have not changed anything in my Pi. Any ...
0
votes
0answers
14 views

RPI access point and how to share the internet with connected devices

I want to share the Internet from my USB modem stick on my raspberry pi to other devices by turning my pi into a WiFi access point. I am using a pi 3 model B+ running raspbian stretch and I am able to ...
0
votes
0answers
200 views

How to control the raspberry pi over internet using android app?

I had bought a Raspberry pi 3b+ recently to make many of the projects I had dreamed of. Most of these (or maybe all) involves controlling the GPIO pins over the internet using an app. One of the ...
0
votes
0answers
156 views

Rpi3 Bluetooth hotspot continuously from iPhone

I'm new to Raspberry world, I received a pi3 model as a gift. I noted that there is a generalized problem when Wi-Fi and Bluetooth modules work at the same time, for example with a Bluetooth mouse/...
0
votes
1answer
152 views

Connecting Raspberry Pi 3 with Huawei Surfstick 372

I tried to connect my Raspberry Pi with the Huawei Surfstick. All the tutorials i watched so far didn't helped me. If i plug in the Surfstick the raspberry shows that it is associated with it and has ...
0
votes
0answers
465 views

This site can't be reached

My Raspberry Pi is successfully connected to internet but my chromium browser is showing the error "This site can't be reached".
0
votes
1answer
915 views

WLAN connected but no internet

I already tried dist-update and this post I have a Raspberry Pi 3 B + and my operating system is "Raspbian GNU/Linux 9 (stretch)" I am connected to it using a Lan cable and use ssh or Remmina to ...
1
vote
1answer
101 views

How to synchronize GPIO state between two Raspberry over Internet?

What is the simplest way to synchronize GPIO state (states are: 1 or 0) between two Raspberry devices connected via Internet ? What I need is immediately change GPIO state on Raspberry 1 if Raspberry ...
2
votes
2answers
42 views

Supplies for non-internet connected, wire-only machine

Instead of using wireless technologies or Bluetooth or anything like that, I would like to only work with wires like the Ethernet and USB cords. This way you can know that the machine has only ever "...
0
votes
1answer
38 views

Browser-based software to configure as a router

Was just wondering this when trying to configure an RPi as a router, is there a software that you can install on your pi to be able to configure the port forwarding, DHCP, etc by accessing the local ...
0
votes
1answer
513 views

How to connect GSM module to Raspberry PI3 and also using Bluetooth of Raspberry PI3

I want to use Bluetooth of Raspberry Pi3 and also I want to Connect GSM module sim800l to Raspberry Pi3 ,in this instruction Bluetooth will be disable , what is the the best way to use both of them? ...
1
vote
1answer
45 views

Connect to 3G (yet again)

I'm trying to connect to a 3G network via a Huawei E173 modem. Thankfully it is getting recognized as a usb modem without me having to deal with modeswitch Bus 001 Device 006: ID 12d1:1436 Huawei ...
1
vote
0answers
64 views

Upnp for Rpi zero w with pi cam

I am trying to implement the upnp on my RPI ip cam. The goal is to make it portable so I can use it anywhere (with just the wifi SSID and pwd) without having to port forward everytime I have to deal ...
3
votes
2answers
5k views

10MB/s speed on model 3 B+ gigabit ethernet

I'm running speed tests on raspberypi 3 b+ (gigabit ethernet interface). I've tested with ethtool from the terminal, and it shows Speed: 1000Mb/s Based on this result I assume both the router and ...
0
votes
1answer
564 views

How to make Raspberry Pi an Internet whitelist

I want to set-up an Internet whitelist (a feature NOT AVAILABLE in my modem/router) using a Raspberry Pi Zero W (RPi0W). As answered in this post, I have made changes to /etc/privoxy/config: As in ...
3
votes
1answer
2k views

VPN Passthrough two ethernet interface

I'm a quite new in the network my internet acces have a proxy so to by-pass it I use a VPN hosted on my VPS. I use the OpenVPN Client software for all my devices. (Windows, Android, Linux) I got a ...
0
votes
2answers
198 views

No Internet, can ping to IPs but not hostnames

I have a raspberrypi zero w using pivpn, was working fine until I upgraded to stretch, now I can still to it via the vpn and do ssh, but I have no internet. Trying a few things in the pi, when I do a ...
0
votes
2answers
718 views

Internet not working over wifi when RPi is connected to laptop using Ethernet

I am having problems using Wi-Fi to access the internet on my Raspberry Pi when I connect the Pi to my laptop over ethernet. Wi-Fi works fine and I can access the internet on the Pi when there are ...
0
votes
0answers
2k views

Connect to internet using Huawei E3531

I have Raspberry Pi 3 Model B V1.2 with Raspbian Stretch installed. I want to connect to internet with my Huawei E3531 dongle. I already followed this tutorial (How to use a Huawei E3531 in Modem ...
0
votes
0answers
279 views

Mplayer starts very slowly

I'm using raspberry pi zero w, I generally need to start mplayer again and again in separate times. However, it starts to run really slowly. Is there a way to make its start faster? I'm using rotary ...