Questions tagged [kali]
Kali Linux is a Debian-derived Linux distribution designed for digital forensics and penetration testing. It is maintained and funded by Offensive Security Ltd. Images are available for the Raspberry Pi.
0
votes
0answers
27 views
Connectivity to internet with two WiFi adaptors
I am using Rasberry Pi with Kali Linux.
I have two WiFi adapter one (internal).
I am using for headless mode connection to my phone and other (external).
I am using for connectivity to internet to ...
1
vote
0answers
25 views
Raspberry Pi Zero -V1.3 Kali-SSH VNC through USB connected to PC possible?
I would like to SSH and VNC to a rasberry pi Zero V1.3 (Non-wifi) running Kali using just the USB connected to a PC that is connected to the network.
It is possible with Raspbian:
https://www....
0
votes
0answers
12 views
Wireless issues - interfaces randomly assigned
I have a RP3B+ with a Kali Pi build and am having some newbie wireless issues. I have a Ralink RT5370 that I'd like to enter monitor mode on boot, but wireless interface assignment is inconsistent on ...
0
votes
0answers
24 views
How to recover from a kernel panic like this?
Getting stuck while boot process, I don't remember installing anything on Kali linux raspberry pi
1
vote
1answer
72 views
Kali tools on raspbian?
Is it possible to install Kali tools on Raspbian?
I have tried Katoolin but I keep getting a segmentation fault error when fixing the dependencies and getting stuck in a loop where "it is not going to ...
0
votes
0answers
39 views
x11vnc not responding to commands on Kali Pi
After getting my Raspberry Pi 3 B+ setup on the sticky fingers Kali Pi OS I tried to get x11vnc running off it. Following the tutorial found here...
https://www.youtube.com/watch?v=JVUsOMKGvpU
I ...
1
vote
1answer
1k views
Kali Linux, Cannot Generate New SSH Keys
I am trying to set up my Pi 3 B+ with kali linux to create a test box to practice some attacks. I am following these tutorials:
Set Up an Ethical Hacking Kali Linux Kit on the Raspberry Pi 3 B+
Build ...
1
vote
1answer
51 views
Not able to close monitor mode in my Raspberry PI0W
I decided to start monitor mode on my Raspberry PI0 but I messed up somethings afterwards and decided to reinstall kali linux but after reinstalling it I was not able to connect to the internet and ...
0
votes
0answers
151 views
Kali ARM image for the Raspberry Pi (2018.3) - kernel mismatch?
I recently downloaded the latest(2018.3) Kali ARM image for the Raspberry Pi from https://www.offensive-security.com/kali-linux-arm-images/ but I can't get it to recognize the built-in WiFi interface ...
2
votes
0answers
89 views
How to scan undiscoverable bluetooth devices with Kali?
I set up a Raspberry Pi 3 with Kali Re4son kernel.
My goal is to scan bluetooth speakers that are already paired. But paired devices don't show up when I do bluetooth scanning with Kali's tools and ...
0
votes
0answers
60 views
Regarding Kali for Raspberry Pi 3B+ [duplicate]
I had recently bought a Raspberry Pi 3B+ , Raspbian works smooth on 3B+, but when I install Kali, it shows a Rainbow Flashing Screen.
Has a new image for Kali been released for Raspberry Pi 3B+?
0
votes
0answers
103 views
Kali pkg: error: failed to open package info file '/var/lib/dpkg/updates/0051' for reading: Structure needs cleaning
Using Kali to apt upgrade
but get error as:
E: dpkg was interrupted, you must manually run 'dpkg --configure -a'
to correct the problem.
So I use dpkg --configure -a
get error as :
dpkg: ...
1
vote
0answers
1k views
Slow Refresh Rate on WaveShare 3.5" LCD (B) on RPi 3 B+
I've flashed StickyFingers-Kali-Pi-armhf-180607 to my Raspberry Pi 3 B+ with Waveshare 3.5" LCD (B). I update and configure the unit for my specific screen using the guide's instructions, entering the ...
0
votes
1answer
139 views
My Raspberry Pi 3 B won't work with the touchscreen
So i've got a KeDei 3.5" touch screen Version 6.3 and i installed an image of Kali with the driver that's given of KeDei's website (http://kedei.net/raspberry/raspberry.html) but it hasn't been ...
0
votes
1answer
100 views
How to exit read only filesystem to get write permission in order to download a driver form Github?
I am trying to set up a 5 inch LCD on my Raspberry Pi 3. It runs Kali Linux, I'm on a no GUI boot and (automatically) logged in as root.
When I run the command (to download the drivers):
git clone ...
0
votes
2answers
907 views
Extend Root Partition Failure (Kali + RPi 3b+)
I have recently built a Raspberry Pi 3b+ with Kali Linux for the Pi (https://images.offensive-security.com/arm-images/kali-linux-2018.2-rpi3-nexmon.img.xz).
I have unpacked and dd the image onto my ...
0
votes
1answer
193 views
Raspberry Pi 1 stuck booting Kali after Network Manager Script Dispatcher Service
I flashed the Kali Linux RaspberryPi w/TFT image from the official website.
However, booting gets stuck after "Started Network Manager Script Dispatcher Service."
0
votes
0answers
19 views
Micro-Sd memory problem
i am using a 64gb micro-SD but after using etcher for kali (7 Gb), i have only 55 mb left!
How can i solve?
I tried to burn the .img again but the problem is everytime the same
0
votes
1answer
224 views
Can't get past rainbow screen with Kali install process
I am new (to all of this, Pis, Linux, etc). This is my first real attempt at working directly with hardware as well.
I needed a new project so I got a Canakit started set which came with a Raspi 3B+,...
0
votes
0answers
45 views
Stuck at colorful boot screen AFTER installing software to run an LCD 3.5" GPIO screen on my pi3
the charger I am using is for an Amazon Alexa and it outputs 5.25V; there is enough power to power the pi, multiple peripherals, ethernet, HDMI, and the screen. BUT- when I install the software to ...
1
vote
1answer
356 views
My Raspberry Pi won't boot no matter what I do (It has worked before, nothing is broken)
I followed the instructions from this website on how to install Linux Kali on my Raspberry Pi Model B (which I have done before but had forgotten how to), and I plugged in the HDMI and microSD card, ...
0
votes
0answers
60 views
How can I get all the modules of node.js to raspberry pi. Please see the link below, I need this exact thing for a raspberry
SO I have to run a custom electron app which is running on AMD device after installing node.js from this site,
https://ourcodeworld.com/articles/read/410/how-to-install-node-js-in-kali-linux
Is ...
0
votes
0answers
516 views
Kali image 2018.1a won't boot on Pi3 B+ [duplicate]
have anyone tried Kali ARM version on Pi 3 B+ version yet.
I have downloaded latest image from https://www.offensive-security.com/kali-linux-arm-images/ but once loaded on microSD and booted from Pi3 ...
0
votes
0answers
23 views
Change Pi HDMI output via PC
So I recently put Kali linux on my Pi3 via MicroSD, but the output on HDMI isn't on.
I know there's a way to enable it... but there's no way I can connect to it (as far as I can tell) to actually ...
0
votes
2answers
503 views
Trying to install Kali on my Pi 3
I'm a beginner with the Raspberry Pi and know little about it, so please bear with me. I was trying to install Kali onto my Pi, so I used my PC to format an SD card and load what I assume is the image ...
1
vote
0answers
309 views
Unable to get Pi to boot with Kali
I'm trying to flash an SD card with Kali Linux to run on my Pi. I've followed the instructions found here: https://docs.kali.org/downloading/kali-linux-live-usb-install and the image I downloaded came ...
0
votes
0answers
831 views
Trying to boot a headless RPi Zero with Kali
Is there anyone that has a functional raspberry pi zero with Kali installed? I am asking because I can't figure out the parameters to connect using SSH
EDIT
More specific, I can't figure out what is ...
-3
votes
1answer
845 views
Fastest raspberry pi 3 os other than raspbian? [closed]
When I first got my raspberry pi 3 I had raspian on it but I didn't like it very much so I put kali linux on it and it was even slower than raspbian. Is there any other raspberry pi os that is fast ...
0
votes
0answers
237 views
Cannot connect ssh after connecting to AP using hostapd
I configured an AP using the hostapd in Kali , I can connect to the AP but cannot ping the AP IP and cannot also connect to it by ssh without connecting the cable in eth0. Any ideas how i can connect ...
1
vote
0answers
55 views
KaliPi on raspberry pi 0
I'm having some trouble in installing Kali distribution for raspberry on the Pi zero (no wifi) device.
Actually I think it is basically fine but empty, I only get the terminal version of Kali with ...
1
vote
0answers
148 views
Kali not showing GUI when raspberry starts
When I turn on my Raspberry Pi 2 with Kali Linux, the screen is still off and does not receive any signal. But if I connect with SSH, log as root/toor, startxfce4 and reboot the screen turns on with ...
0
votes
0answers
109 views
Connecting to x11vnc over AP broadcast by the Pi
I am using a Raspberry Pi 3 running Kali.
The onboard wifi adapter (wlan0) is connected to my local wifi network and I am using hostapd to broadcast another access point using a usb wifi adapter (...
1
vote
2answers
976 views
Set up headless SSH with ethernet adapter for Pi Zero (Kali Linux)
I have been doing some research about the Pi Zero, and have decided to try and make mine boot as an ethernet adapter. I have followed this tutorial, but could not find a config.txt file. I added mine, ...
1
vote
0answers
130 views
HDMI display output rendered useless on 2 different Raspberry Pi 2
Is there a way to corrupt the firmware in the Raspberry Pi ARM?
I cannot understand what has happened to my 2 RPIs and I was never expecting software or the operating system being able to disable the ...
0
votes
1answer
461 views
how can I repair unrecognizable sd card
This SD card has Kali loaded for Raspberry pi 3.
Some how I corrupted sd card by editing config.txt file in windows 10 machine, after then sd card was unrecognizable by neither machines windows or ...
0
votes
1answer
2k views
Fixing Audio Problem
I have using raspi and wondering to fix some complicated issue for me because of my less of experience. One of the problems is how to configure the audio for Raspberry Pi in several Oses (I am using ...
1
vote
0answers
456 views
Driver for 3.5 inch touch Screen (GPIO) which supports KALI LINUX
I have recently bought a 3.5 inch touchscreen for my Raspberry Pi 2 B+. After a lot of search I got this driver (working).
But it is only supports Raspbian. I want to run it on KALI. Please Help.
0
votes
3answers
394 views
Wireless raspberry pi 3
I'm able to connect raspberry pi 3(running kali linux) to a phone via its mobile Hotspot using ssh.
But each time I first have to plug the pi to a screen to start it up. I want to know a method with ...
0
votes
1answer
242 views
Ssh and vnc server [closed]
I want to setup my pi 3 working with just a power bank and my phone via mobile Hotspot. I know that ssh and vnc server are two ways to do it but I don't know how.
Thanks for your time and I ...
0
votes
1answer
91 views
Affordable and compatible usb wifi adapter [closed]
I run kali linux in my raspberry pi 3 model B. I know that alfa makes some of the best cards and that Atheros is the best for ethical hacking and packet injection. But I just wanted to know if there ...
3
votes
1answer
1k views
Getting raspbian repositories on Kali Linux on Zero
I have been working with the Kali Linux distribution built for the Raspberry Pi Zero, and am running into a bit of a problem. It is running fine, but I am having trouble installing Raspbian packages ...
0
votes
0answers
484 views
White TFT screen after installing kuman drivers?
So I have spent a good three days trying to get this TFT screen to work on kali. I have tried every last troubleshooting technique that I could find and still no luck. I am absolutely exhausted with ...
4
votes
3answers
4k views
MacOS Not Discovering Raspberry Pi Zero as an USB Ethernet Device
Issue
MacOS is not finding/discovering my Raspberry Pi Zero as an USB Ethernet Device upon USB connection.
Background
I flashed my Raspberry Pi Zero with the ARMEL firmware, linked on the page ...
3
votes
1answer
502 views
Screen recording on Pi running Kali-Linux
is there any way to screen record what I am doing on my RaspberryPi3 running Kali linux? , I have used RecordMyDesktop, Kazam, Vokoscreen none of them work properly.. Maybe it has something to do with ...
2
votes
2answers
20k views
tightvncserver - Displaying Grey Screen on Kali-Linux upon VNC Connection
PROBLEM: Upon connecting to my tightvncerver on port 5901, I am greeted with a grey screen with an 'X' for a cursor.
Hardware: Raspberry Pi 3
Operating System: Kali Linux 0.6 Raspberry Pi 3 w/ ...
0
votes
2answers
2k views
tightvncserver not setting up properly during installation using apt-get [duplicate]
I am trying to use tightvncserver on my Raspberry Pi 3 so that I can access the GUI without a monitor and keyboard.
However, the install isn't updating-alternatives to vncserver in /usr/bin/ ...
0
votes
3answers
5k views
Can't ssh in Kali headless setup on Raspberry Pi3
I've installed kali for arm on a Raspberry Pi3. The problem is I can't remotely login.
I can ping it, but trying to ssh I keep getting "connection refused". Also checked with nmap but without success....
0
votes
2answers
2k views
Auto-login for Raspberry Pi
Let me first say I have a rpi 2 model B with the official 7" display and a old tablet lipo battery. It has Kali Rolling on it. I have tinkered with it quite a bit at this point...
I need to auto ...
0
votes
1answer
41 views
Hostname stays the same after renaming
I have a Raspberry Pi which used to run Linux Kali and that had a hostname of Sid_KaliPi. I later on formatted the SD card and installed Raspbian Jesse and changed the hostname to LDB_Pi. I then ...
3
votes
1answer
764 views
Raspberry Pi bootable Android
I have a Android device and a 64 GB SD card. I also have an image of Kali Linux on my phone. I don't have a laptop or computer. How do I flash the image to the SD card via my phone.
I would prefer ...
