Questions tagged [otg]
On-The-Go USB ports can be used as either masters or slaves, enabling some Pi models to easily emulate devices such as keyboards or harddrives. The tag is also used for questions about using dedicated slave ports for the same purpose (only the Pi 4 has such a thing).
23
questions
3
votes
1
answer
239
views
PIKVM: OTG via USB-C port but powering via GPIO pins
For my PIKVM I want to use the OTG functionality of the USB-C port of my Raspberry Pi 4 to control the mouse and keyboard, however, I want to power the Raspberry via the GPIO pins instead, because I ...
- 71
0
votes
0
answers
96
views
Can I turn a Pi + HDMI Display into a USB monitor?
Would it be possible to turn a Pi + HDMI display into a USB monitor?
The Pi with the monitor would act as a 2nd display.
(note that I'm not looking to avoid buying a USB monitor, I want to build an ...
- 1
0
votes
0
answers
342
views
Raspberry Pi CM4 OTG Connection Error
I am working about Raspberry Pi CM4 project with special own board. My question is about USB-OTG. I want to see COM connection when I connect CM4 to PC via USB.
I found this wiring for connection of ...
1
vote
0
answers
289
views
Android device not detected when connected to rpizero before boot
I'm working on a project in which a RPi Zero (raspibian buster) controls an android phone by sending commands via adb.
Everything works correctly if I connect the device once the RPi Zero has done the ...
- 111
1
vote
1
answer
226
views
can Rpi 4 model b work as keyboard emulator to two pc?
I am using Raspberry pi model B. I Connected one keyboard to it in usb2 port and I want to write in two pc whatever i am typing on keyboard. right now i tried for one pc. connected keyboard and OTG c ...
- 11
0
votes
1
answer
2k
views
how to configure usb in raspberry pi as otg
How can I configure usb port available in raspberry pi to OTG ?
user135006
1
vote
1
answer
501
views
Looking to have Raspberry Pi Zero act as USB mouse
I’m looking to use a Raspberry Pi Zero to act as a USB mouse for a computer. I’m wanting to move my mouse on a remote computer and have it correspond and move the cursor on the PC the PiZero is ...
- 11
0
votes
1
answer
208
views
Pi4 mass storage gadget and powerbank powered
I'm planning on using a pi 4B to act as a usb mass storage via a gadget module on the usb-c port.
However, I want it to keep being powered when the usbc power is down, to finalise it's internal tasks.
...
- 101
1
vote
1
answer
208
views
Zero4u usb hub on raspberry pi Zero W does not recognize whatever USB device I connect to it
I am writing to tell how I managed to solve my USB hub problems related to raspberry pi zero W, but I would still want a feedback and related help on this.
The issue was, I could not get anything ...
0
votes
0
answers
362
views
Can a PI emulate a CD/RW drive
I have a piece of software that archives out onto CD and I really want to remove the drive as I am just archiving the data and copying it back off the disk onto my computer and putting the CD in the ...
user130616
1
vote
1
answer
1k
views
Pass traffic from one network interface to another
I have a project where I have 4x RPiZ plugged into a single RPi4. The RPiZs appear as Ethernet over USB devices as network interfaces ethpi1, ethpi2,ethpi3, and ethpi4 with IP addresses 10.0.11.2, 10....
- 152
0
votes
2
answers
181
views
Connect 2 Pi's for file transfer, but with minimum networking [closed]
I want to connect two Pi's together for the purpose of transferring files, but I want to do it in the most secure method possible. One Pi ("Device 1") will be connected to the internet, and ...
- 103
0
votes
0
answers
373
views
Pi Zero OTG ethernet zero with USB-C
I have been doing a series of projects using RPiZs networked using ethernet over USB. In the middle of this, I upgraded my computer to a new MacBook Pro which only has USB-C ports, so now I need to ...
- 152
0
votes
0
answers
35
views
Raspberry Pi 400 as external keyboard via USB [duplicate]
Is it possible to use the raspberry pi 400 as an external keyboard on another PC or tablet using the USB-C (OTG) feature?
0
votes
0
answers
752
views
OTG mode Multi (g_multi) is not working on Raspberry Pi 4
I want to use the Raspberry Pi 4 as ethernet and mass storage device. According to the documentation I have to do configure the following files:
/boot/config.txt:
dtoverlay=dwc2,dr_mode=peripheral
/...
- 1
2
votes
0
answers
279
views
Debug OTG on RPI 4 for g_midi?
I tried to set a RPI 4 in OTG device mode
I added dtoverlay=dwc2 to config.txt
I modified the cmdline.txt so it launches wc2 & g_midi
I tried ,dr_mode=peripheral too
I just tried replacing ...
- 21
0
votes
1
answer
4k
views
SSH into Rasberry Pi 4 over USB (Ubuntu Core) [duplicate]
Is it possible to SSH connect via USB-C -> USB to Rasberry Pi 4 in Ubuntu? Like this
- 1
2
votes
0
answers
272
views
Raspberry Pi Zero OTG g_mass_storage plug / unplug events
I have a RaspberryPi Zero connected to my PS4 and want to use it like a smart Network USB stick.
The ultimate goal of my project is, that I want to automatically send data to a specific host in my ...
- 56
0
votes
1
answer
574
views
Pi Zero configured as HID not being recognized by PC (dmesg error)
I followed this guide to setup my Pi Zero W as a keyboard HID. Connected it to a laptop (via the data USB, not the power) to see no effect. When I started investigating, I saw that dmesg is showing ...
2
votes
4
answers
2k
views
Pi Zero USB On The Go cannot connect
There are several posts that say a Pi Zero can be connected to another computer with USB to enable networking (e.g. Linux host, Windows host or https://www.circuitbasics.com/raspberry-pi-zero-ethernet-...
- 329
5
votes
1
answer
7k
views
USB 3.0 OTG on Raspberry Pi 4 (USB gadget)
Raspberry Pi 4 can do USB OTG via the USB-C connector (according to this answer) - but only at USB 2.0 speeds since the USB-C connector only connects to USB 2.0 lanes.
My question is - can Pi 4 also ...
- 250
7
votes
1
answer
889
views
USB OTG on Compute Module 3
Has anyone ever tried configuring the USB of the Compute Module 3 as USB OTG?
In the default kernel (Raspbian Stretch - Kernel7), support for usb otg appears to be disabled.
Has anyone managed to ...
5
votes
3
answers
2k
views
USB OTG w/ Raspberry Pi Zero
I'm following Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!
What I've done;
flashed latest (2017-04-10) Raspbian image onto SD card,
added dtoverlay=dwc2 on new line ...
- 327