Questions tagged [pi-1]
This tag is intended as the antonym for the "pi-2"/"pi-3" tags for questions that are based on the Broadcom BCM 2835 not those units' 2836/2837 devices. This should be used for questions that apply ONLY to the former Processor type but is generic to any RPi type that fits that classification - which can include the pi-zero and the compute module, it also does NOT distinguish between model A and B units!
43
questions
0
votes
0answers
19 views
Install OpenCV and NumPy on raspberry pi b+ [closed]
I want to install "OpenCV" and "NumPy" on my Raspberry Pi B+. I was thinking about installing them on a USB and then transferring to my pi since my raspberry pi is so slow.
Is it fairly simple to ...
1
vote
1answer
247 views
Getting the doorbell signal to my raspberry pi
This is the first time I'm doing such a project.
I haven't started yet. Right now I have the raspberry pi in pic 1 (the original I think). If i press the button (pic 2/3) A signal goes towards the ...
0
votes
3answers
497 views
Raspberry Pi not booting and may be damaged
My Rapsberry Pi 1 is damaged. The Broadcom chip gets very hot and only the red LED glows with green LED blinking randomly.What should I do with the Raspberry PI.
0
votes
1answer
1k views
Can Raspbian stretch lite (latest) run on a Raspberry Pi 1B?
I have a couple of old Raspberry Pi 1Bs and was going to repurpose it for something simple. I decided to make a new flash drive for it using the latest Raspbian Stretch Lite image 2018-04-18. The ...
0
votes
0answers
29 views
NAS on Raspberry 1B
I have a Raspberry 1B that I want to use with an external SSD for usb, to use it for backups.
At first I thought about installing OpenMediaVault but it does not have support for this Raspberry.
What ...
1
vote
2answers
2k views
Accessing Cam Web Interface over a VPN
I have 2 Raspbery Pi's (B+) set up in 2 different locations:
RPi 1 is at home. It is connected to the internet and port forwarding is allowed. I am able to SSH into it from another location. I have ...
3
votes
1answer
3k views
Installing NodeSource Node.js v7 on Raspberry Pi 1
I want to install NodeSource Node.js v7 on my Raspberry Pi 1, but when I run the code:
curl -sL https://deb.nodesource.com/setup_7.x | sudo -E bash -,
I am presented with:
## Installing the ...
1
vote
2answers
65 views
Flashing Raspberry Pi CM V1.1 on a proprietary board
So I don't know much about Linux or the Raspberry Pi (Especially the compute module), But I've managed to obtain one that is using a custom/proprietary board alongside it.
All the thing is currently ...
0
votes
1answer
32 views
Wifi disconnecting on Raspbian Stretch Lite?
I've got an old RPi 1 Model B, that I'm trying to use as a Wake-On-LAN server. I've got it connected to Wifi with a DWA-171 USB/WiFi dongle and these drivers (the link contains a script that installs ...
1
vote
1answer
124 views
Can't connect to multiple wifi networks
I'm having trouble connecting to a network that isn't the first one in my wpa_supplicant.conf file (NETWORK3). I can connect to NETWORK1 just fine, but it is a Wifi hotspot, so I would prefer to not ...
1
vote
1answer
429 views
Connecting Hifiberry Digi+ clone (PiFi Digi+ V1.0) to an Raspberry Pi 1 B (26Pin Header)
Hi I wanted to make use of an older Raspberry Pi and build an Volumio Music Player. I ordered Hifiberry Digi+ clone (PiFi Digi+ V1.0), unfortunately I forgot I own an older Raspberry Pi 1 B with the ...
0
votes
1answer
63 views
mysql-server: Setting bind-address not working without launching manually as root
I haven't been able to get my mysql-server on my raspberry pi to communicate with other network devices with networking enabled unless I manually start the server myself with sudo mysqld --bind-...
2
votes
1answer
48 views
Unusably slow performance on Model B Revision 2.0 using latest Raspbian kernel - advice?
I finally decided to try out a RBP that was given to me years ago. It's a Pi 1 Model B Revision 2.0 (PCB 2011.12). I installed and set up the latest Raspian kernel using NOOBS, no problem.
However, ...
0
votes
0answers
19 views
Unable to connect to wifi - ifup service failed
I'm using a raspberry pi model 1B with a dongle and I can't connect it to wifi. It was working (mostly) a few weeks ago, but now the wifi doesn't work at all. The log shows something about the ifup ...
1
vote
3answers
66 views
Which distro supports the first raspberry pi? pi1
piCore from tinycorelinux supports rpi 1, but it seems to be missing some drivers that i need, and also, their downloads are not signed or shasummed. Though the official raspberry pi debian stretch is ...
1
vote
1answer
76 views
How to connect Raspberry Pi to my linux PC?
I haven't done anything to my Raspberry Pi or my computer except for putting the docker image onto the SD card.
I tried looking for how to do this without a display but couldn't find how anywhere. ...
2
votes
1answer
129 views
Wifi Repeater – Set Interface down by Default (dhcpcd)
I use a RPI 1 as wifi repeater with two wireless dongles. I configured it using hostapd and dnsmasq.
I want the pi only to be connected to the internet if there is somebody connected to my access ...
1
vote
1answer
2k views
Replacing hostapd with wpa_supplicant
I want to get rid of hostapd, because it is very unstable, and use wpa_supplicant instead.
What I did
So I followed these instructions. I have a RasPi 1 with two external wifi dongles. I used a ...
0
votes
3answers
447 views
Restore backup failed (using rsync)
I backuped my RPI following goldilock's answer (Can a Raspberry Pi be used to create a backup of itself?). Running this:
rsync -axHv --delete --exclude-from=rsync-exclude.txt --rsh="ssh" root@...
1
vote
1answer
517 views
Can't mount USB drive
My USB drive won't mount! When I try to mount it using this command:
sudo mount -t vfat /dev/sda /media/BackupUSB -o rw,umask=0000
it would just say that it is already mounted or in use, but it ...
0
votes
2answers
71 views
Raspberry Pi Heats up Rapidly
For weeks, I have used my Pi (1 model B) and it worked perfectly fine. Suddenly, when I used it, it shut down and stopped working. When I tried to reconnect the power, the power button very faintly ...
3
votes
3answers
10k views
Raspberry Pi 1 Model B+ end of life?
TL;DR
My Raspberry Pi (Model B+) can't run the newest Raspbian (Stretch), suspected is that the kernel doesn't work. Anything with a kernel version above 4.1.19 will fail to load. Does this mean that ...
0
votes
2answers
786 views
RPI wifi repeater - slow internet speed
I configured my RPI as a wifi repeater (using hostapd and dnsmasq). When I download something to my pi I have a downstream up to 1.5 MB/s. On my device connected to the pi the downstream is only about ...
0
votes
1answer
694 views
Unable to ssh into Pi after turning it into a bridge
I'm trying to turn my Pi into a bridge using a wifi adapter and it's ethernet port plugged into the router through a couple floors worth of wires and switches. Doing so however removes me of the ...
1
vote
1answer
585 views
Cross Compiling ARM Kernel on 64bit machine
I've been trying to cross compile a kernel for my Pi 1 on my 64bit Desktop, following this guide: https://www.raspberrypi.org/documentation/linux/kernel/building.md
At this command (in the last ...
0
votes
0answers
155 views
How to access the external SDRAM?
Is it possible to access the external 512 MB SDRAM (on my Pi B+) from a bare-metal program? If yes, how would I do so?
Do I have to configure and use the MMU for it? I don't want to handle virtual ...
1
vote
1answer
10k views
spotify-app under Kodi (LibreElec)
I try to run a spotify-app
plugin.audio.spotify-1.0.26.zip
from Marcel Veldt
under Kodi Jarvis (LibreElec - latest release).
I tried it with this howto
https://seo-michael.co.uk/how-to-install-...
1
vote
0answers
167 views
/dev/urandom error in chronyd
I have Crux ARM version 3.2 installed. When I try to start chrony daemon (/etc/rc.d/chronyd start) I get a weird error message:
Can't open /dev/urandom : Permission denied
Some facts:
I'm doing ...
0
votes
1answer
2k views
Configure Raspberry Pi for use eth0 and wlan0 at the same time
I am using 2012-07-15-wheezy-raspbian OS on my Raspberry Pi. I have connected Raspberry Pi to the router through lan cable. My laptop is connected to the router through Wifi and hence i can connect to ...
2
votes
1answer
808 views
Raspberry pi USB camera feed (LOCAL ONLY - no network)
I've come across many tutorials that allow for the network streaming of a USB camera from a pi.
I simply want to view a live stream FROM the raspberry pi ON the raspberry pi.
Setup:
Wired usb ...
1
vote
1answer
200 views
How to install a nix OS once and only once
I have a Raspberry Pi 1 Model A and would like to install a *nix (probably either Raspbian or Ubuntu) OS to something (SD card, whatever) so that I only have to install it one time, and that the rpi ...
2
votes
1answer
79 views
How to share an sd card across different pi models
I have installed Noobs 2.4.2 with Raspbian 8 on Pi 3. Kernel 4.9.35-v7+. It works, but now I need to run the system that's on the sd card on another board which is Pi 1 Model B. It doesn't boot, says ...
0
votes
1answer
815 views
Raspberry Pi Reverse Proxy Performance
I currently have a Nextcloud server on a Raspberry Pi 3, which works perfectly fine. In addition I want to setup my Raspberry 2 as a Gitlab Server.
I also have an unused Raspberry Pi 1 Model B+, ...
0
votes
1answer
2k views
I can't install anything with pip
Every package I try to install using pip, I get this error.
I already updated the pip but even so doesn't work
my pip version is 9.0.1
Exception:
Traceback (most recent call last):
File "/usr/...
1
vote
1answer
247 views
I2C connection to MS5637 baro sensor using wiringI2CPi
I am trying to write some code to connect and drag data across I2C using the Wiring Pi library, I'm at the stage where any data would be good but this is a link to the sensor's datasheet I'm trying to ...
1
vote
2answers
5k views
How to sort out “RuntimeWarning: A physical pull up resistor is fitted on this channel!”?
Yesterday everything was working fine, but today I ran the same code and I am getting the following error even though nothing has physically changed:
test3.py:8: RuntimeWarning: A physical pull up ...
-1
votes
4answers
910 views
What's the smartest way to send data from my pi to my PC?
Here's the deal: I've connected a small RFID reader module (RDM6300) to my Raspberry Pi 1 Model B. That means I've taken up one 5V pin, one ground pin and one RX pin. A python script reads my RFID tag ...
0
votes
2answers
164 views
Windows to Raspberry Pi file transfer [duplicate]
I am using raspberry pi 1 through putty (windows platform) I like to move files from my windows desktop to raspberry pi..
whats are the commands.. kindly let me know..
0
votes
1answer
96 views
How do I install drivers for a wifi antenna onto my Pi?
I have been following this guide and am at the point of entering the following:
sudo /usr/sbin/hostapd /etc/hostapd/hostapd.conf
This should setup the wifi network however my Pi returns the ...
1
vote
1answer
65 views
Device Incompatibility List
Here goes my first question ....
Is there are well maintained list or chart of devices/brands that have known incompatibilities with raspberry pi
either in software (generally fixable or can be ...
18
votes
3answers
2k views
Tell apart RPi 1 from RPi 2 via SSH only
I am connected to 2 Raspberry Pis via SSH. They are running the same OS (Raspbian in this case).
How can I tell which one is Pi 1 and which one is Pi 2?
I know how to identify the physical hardware ...
1
vote
0answers
94 views
Issues with first-time boot of OpenELEC on RPi1
I recently installed OpenELEC onto and SD card for my RPi1, following the instructions on the Distro wiki. Upon inserting and starting the Pi, a screen showing the OpenELEC logo shows for a while then ...
2
votes
1answer
3k views
How to install GitLab on a Raspberry Pi 1?
A friend lend me his old Raspberry Pi to try it out.
Currently I am trying to install GitLab on it.
I followed the instructions from their install page.
Even though it is stated that those ...
