Questions tagged [pi-3b+]

Use for questions specific to the Raspberry Pi 3 Model B+

3
votes
0answers
65 views

Google assistant on RaspberryPi3

I need help as I am stuck doing a project. I followed the tutorial on google developers website " https://developers.google.com/assistant/sdk/guides/library/python/extend/install-hardware" and got the ...
3
votes
0answers
123 views

Are the camera and display connectors of my 3B+ soldered the wrong way around?

I recently purchased a new 3B+ board and although the board board itself is working fine, I can't get the PiNoir camera to work. The camera works fine on an another 3B board. I tried several tricks on ...
3
votes
0answers
360 views

Accelerated Numpy on Pi 3 B+

I'm looking to do some work with NumPy on my Pi 3 B+, and I'm not sure what the deal is with optimization, blas, etc. I installed libatlas using: sudo apt-get install libatlas-base-dev Following ...
2
votes
0answers
18 views

Configure AlexaPi to use bluetooth speaker connected to my Raspberry Pi 3B+

I am trying to clone Alexa on my RaspberryPi 3B+. Following are the links which I am following. https://github.com/alexa-pi/AlexaPi https://github.com/alexa-pi/AlexaPi/wiki/Installation I have done ...
2
votes
0answers
20 views

Dropped wifi packets from Pi Zero W to Pi 3B+

We're trying to build a system where a master Pi 3B+ controls a dozen (or more) Pi Zero W clients - all running the latest raspbian (as of 18:00 EDT today) - in an isolated WiFi island (no ...
2
votes
0answers
35 views

Image rollback using Raspberry Pi Bootloader

I'm using Yocto framework based RPi build and have created My SD card partition as follows, ======================== SD card with 3 parts ======================== | 68MB(bootloader) | 4GB(...
2
votes
0answers
48 views

webcam issue after UV4L installation

I am trying to make a usb webcam work on my rpi but it drives my nuts. I have Rpi 3 model B+ Also I've downloaded the newest raspbian image (stretch with desktop and recommended software). It's ...
2
votes
0answers
230 views

Bare Metal RPI 3B UART not working

I have referred many tutorials to get UART working in bare metal environment on RPI 3. https://github.com/dwelch67/raspberrypi/tree/master/uart05 https://github.com/mrvn/RaspberryPi-baremetal/tree/...
2
votes
0answers
69 views

How can I force the Pi to wake a monitor

This question is not specifically a Pi question, but about how to FORCE the Pi hdmi to wake my monitor from sleep, which seems to be a seems to be specific to the Pi hardware, although it may be a ...
1
vote
0answers
31 views

Powwering Raspberry pi 3 with Li-ion battery

I use MT3608 boost converter in order to convert Li-ion voltage to 5V for RPI, but when I connect battery, RPI doesn't boot up. When I check output of MT3608 it is 5V but it can't tolerate peak ...
1
vote
0answers
20 views

Using an additional WiFi dongle to create WAP and switch

I followed the answer to this question: Access point as WiFi router/repeater with additional WiFi-dongle To have my 3 B+ act as a WiFi hotspot where wlan1 connects to the internet (WAN) and the pi ...
1
vote
0answers
10 views

Linux headers missing from a custom kernel built through cross-compilation

Helo, I have followed the instructions given at https://www.raspberrypi.org/documentation/linux/kernel/building.md to build a custom kernel. (I have cross-compiled it on an x86 box.) The custom ...
1
vote
0answers
56 views

raspberry pi3 + fingerprint

I'm looking for a way to connect fingerprint scanner with raspberry pi3 using python. I'd like to use only gpio or hat (not usb) interface. I'm searching for a while without figured out, so I've ...
1
vote
0answers
19 views

sudo apt-get update isn't working / networking problem

I am getting following errors repeatedly upon using apt-get update command : pi@raspberrypi:~ $ sudo apt-get update Err:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease Cannot ...
1
vote
0answers
24 views

Ubuntu Mate compatibility

A Raspberry Pi3 B+ was outfitted with: ubuntu-mate-18.04.2-beta1-desktop-armhf+raspi-ext4.img which indicates that the B+ is the recommended hardware. That being said, at bootup, the rainbow screen (...
1
vote
0answers
18 views

Can't get bluetooth headphone mic working with pi

I am trying to get my Bluetooth headphone mic working with pi b+, my headphone gets connected and audio output is also working but its mic isn't working with pi. I had gone through several online ...
1
vote
0answers
23 views

Bash script running fine in terminal window, but not when added to autostart

I use a script to start the google voice assistant on my rpi. This script runs fine when I run it from a terminal window, but when I try to run it via the LXDE autostartup nothing happens. It used to ...
1
vote
0answers
16 views

Pi-topCEED / Bluetooth áudio question

I’ve a Raspberry Pi 3B+ along with a Pi-topCeed and pi-top SPEAKER ver 2. Using Raspbian Stretch not pi-top OS. It works ok but for better quality I want to try using a Bluetooth speaker to play ...
1
vote
0answers
47 views

Raspberry Pi Touchscreen Screen Control (Python)

I want to create a script that will turn off my Raspberry Pi Touchscreen if nobody touched the screen in 30 seconds. (In the future I want the option to reset this 30 second timer with other programs -...
1
vote
0answers
324 views

Raspberry Pi 3 B+ - Error: Driver 'sdhost-bcm2835 is already registered, aborting. What is that and how to solve it?

I have a Raspberry Pi 3 B+ and a microSD 64GB. I am going trough the boot process following this video. This is what I have: MicroSD card 64Gb (it is working) formated to FAT32 using MiniTool ...
1
vote
0answers
30 views

Sending command over one I2C bus sometimes triggers a device on another bus

My setup: Raspberry Pi 3B+, 2 BigRelays connected to it over different I2C busses (1hw, 1sw). I had hoped to daisy-chain the two boards over the hardware I2C pins, though as the boards have the same ...
1
vote
0answers
64 views

Raspberry Pi 3 B+ not reading time from the GPS

I have a Raspberry Pi 3 B+ with Adafruit Ultimate GPS HAT (https://www.adafruit.com/product/2324) with external antenna. I configured the device to act as NTP server but the NTP server won't work (No ...
1
vote
0answers
77 views

Second i2c bus on RPi 3?

Were you ever successful big-banging a second i2c bus on the RPi 3? I've seen different sites showing a 'dtoverlay', but it doesn't seem to work for me. I see a result of a "i2cdetect -y 3" but very ...
1
vote
0answers
44 views

Display drivers for RaspberryPi3B+

I am trying to get a 3.5 inch RPi Display working on my raspberry pi. I have written my sd card with raspbian and the pi works well (red LCD glows all the time , and greed LCD flickers (fades on and ...
1
vote
0answers
251 views

Install Windows 10 IoT on 3B+?

I bought a 3B+ a few months back and have been experimenting with it with Raspbian, but I recently discovered it is possible to run Windows 10 IoT on it and since I am mainly a C# developer, I want ...
1
vote
0answers
146 views

Autostarting Chromium (Edit: How to connect to the local Session on Pi?)

I just want to auto start Chromium on boot and I followed Method 1 over at this site. The same Method is used in the Top Answer here. All in all it is about adding the command for starting the ...
1
vote
0answers
15 views

How do I stop my HDMI going off

for some reason, after a while the screen connected to my RPI 3B+ goes off, and stays off, until I unplug it and plug it back in again. I only run in console mode, and running alt+F[1-4] does nothing,...
1
vote
0answers
112 views

Disable mouse acceleration on Raspbian Stretch

I can't figure out how to change the mouse acceleration setting such that the change is persistent. Changing the value in the Preferences > Keyboard and mouse settings keeps resetting every time I ...
1
vote
0answers
21 views

My raspberry pi 3+ suddenly stopped displaying

I've been using this raspberry pi for months to run LibreELEC to run Kodi. One day it didn't let out a HDMI signal. I no longer am able to a HDMI signal at all, my SD card is fine, I even reinstalled ...
1
vote
0answers
65 views

BLE Connect fails with page timeout

I've got a custom BLE 4.1 device and I'm trying to connect it to Raspberry PI 3 B+ using hcitool, gatttool, bluetoothctl, ..., without success. The device is an NRF BLE chip with the Nordic UART ...
1
vote
0answers
36 views

raspberrypi3 bluetooth socket problem

I have write program for raspberrypi3 bluetooth communication with hc05 ,but most of the time I am getting error bluetooth.btcommon.BluetoothError: (110, 'Connection timed out') how can I solve ...
1
vote
0answers
125 views

Regarding ttyS0 and ttyAMA0 of Raspberrypi b+

Is it possible to communicate at the same time with raspberry UART(ttyS0) port Rx and Tx and ttyAMA0 (inbuilt Bluetooth) Communication? In my current project, I am doing the serial communication of ...
1
vote
0answers
50 views

Remote internet options

I am looking to set up a RaspberryPi 3 for a trail cam and I have seen multiple option for internet access that are a little dated. Wondering if there is anything more "up to date" that I am not aware ...
1
vote
0answers
24 views

UART 0 PCLK not registered (pi 3)

I'm using a rpi 3 and so to use the UART 0 I had to disconnect the bluetooth from it: enable_uart=1 dtoverlay=pi3-miniuart-bt dtoverlay=midi-uart0 in /boot/config.txt It works great but now at ...
1
vote
0answers
75 views

SONY TV as Display / Monitor

Background: I have successfully used pi-3b+ to display on LG LED TV, New model Sony 4K LED TV. Requesting your support: The year 2011 SONY 40NX710 model is showing blank (No desktop / text-console). ...
1
vote
0answers
17 views

raspberry pi display reverse color issue

my problem with the Raspberry Pi Official 7" Display: In this page I found this: My display fades out to weird patterns when I shutdown/reboot my Pi. Don't panic! This is perfectly normal. ...
1
vote
0answers
131 views

Raspberry Pi 3B+ Bluetooth undiscoverable on iPhone

I installed latest version of Raspbian Stretch with desktop (which comes with pre installed bluetooth). I turned the bluetooth on, and made it discoverable. At the same time I searched for available ...
1
vote
0answers
260 views

Chromefy (Chrome OS) on RPi3B+?

Has anyone tried using Chromefy (a way to get official Chrome OS on any device) or similar Chromium OS releases on the RPi3B+? If so, which one works best?
1
vote
0answers
195 views

Low video quality with h264_omx encoder

I have a Logitech C922 webcam and I'm recording using ffmpeg with this settings: ffmpeg -thread_queue_size 1024 -f alsa -r 16000 -i hw:1,0 -f video4linux2 -thread_queue_size 512 -s 1920x1080 -i /dev/...
1
vote
0answers
257 views

Problem autostarting pigpiod

On my Pi3B+ I had pigpiod configured to run on boot and I can successfully run compiled c programs; specifically DHTXXD.c which contains:- /* DHTXXD.c 2016-02-16 Public Domain */ #include <stdio....
1
vote
0answers
311 views

Android RPi bluetooth disconnects after pairing

I'm trying to set up some simple communication between my RPi 3B+ and my phone One Plus 3, but when I try to pair the RPi, it gets disconnected a few seconds after pairing, and disappears from "Paired ...
1
vote
0answers
221 views

Using Bluetooth to transfer data between two Pi's

I am using two Pi 3B+'s, one is a calculator without a screen, the other one is the human interface with a screen. I would like to command the calculator with the other Pi via Bluetooth. I am using ...
1
vote
0answers
167 views

Ethernet Indicator led on pi 3B+ not glowing

I am a newbie to Raspberry Pi and recently bought Raspberry pi 3 B+. I first downloaded and burn the minibian on sd card as some course suggested minibian. But whenever I connect pi with power, only ...
1
vote
0answers
94 views

PI NOIR Camera Not Working

I recently bought a Raspberry Pi 3B+ and a Pi Noir Camera and attempted to set them up. I followed the install instructions on the Pi website for the board and camera, and unfortunately received an ...
1
vote
0answers
561 views

Slow Chromium on Raspberry Pi 3B+ after update from Jessie to Stretch

I've been looking into my problem for days now and I didn't find a solution to it. If there is already a question about this issue, I have not found it, my apologies. Please direct me to it if there ...
1
vote
0answers
75 views

Jackd problem on RPi3 B+ Stretch

I'm running Stretch on an RPi 3 B+. I have a C-Media USB sound card showing up as: card 1: Device [USB Audio Device], device 0: USB Audio [USB Audio] and ALSA recognises it as the default card ...
1
vote
0answers
52 views

Safe GPIO configuration for powered-down RPi?

I have a RPi3 driving a robot and I've built a dual H-bridge circuit to run it. I have seperate fuses for the RPi and the driving circuit and I'm glad I do! Trouble is, when the RPi is off, the H-...
1
vote
0answers
73 views

Recent raspivid segmented filenaming does nog work properly

I updated to pi3B+ and got the most recent raspivid. In my old software I use raspivid -sg 6000 -wr 40 -sn 4 -o REC_%04d.h264" to produce a file named REC_0004.h264. The new version produces a ...
1
vote
0answers
72 views

Connect to failover WiFi if other router is unavailable

I have two WiFi networks configured in /etc/wpa_supplicant/wpa_supplicant.conf as below, and I'm able to manually switch from one to the other via GUI with no problems (via RealVNC usually). However, ...
1
vote
0answers
33 views

Rpi3 WIFI AP go down after some time of innactivity?

I have setup my Rpi 3 as wifi access point and it was working for a long time. But some day, wifi stop working unexpectedly and i was no idea that what was the problem. It means wifi access point is ...