Questions tagged [pi-3b+]

Use for questions specific to the Raspberry Pi 3 Model B+

311 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
1
vote
0answers
33 views

A weird bug in Raspian

I just updated my Raspberry pi 3B+, after the reboot all windows get their “top” cut of like this: And everytime the cursor is outside the current window it appears as an “x”, I hope you can help me ...
1
vote
1answer
576 views

Pi 3 model B+ won't boot

I was using this specific Pi for over a month now without any issues. Today, out of the blue, the screen started flickering. I decided to shut it down. When I replugged it, the green led wasn't ...
1
vote
0answers
1k views

Can't Login to Pi0 console from Pi3 B+ via UART Serial USB-TTY Adapter

I am new to RPi's so bear with me please: I am trying to log in to the Pi0 console via sudo screen /dev/ttyUSB0 115200 but I just get a blank screen. Ouput of dmesg | grep tty: [ 0.000000] ...
1
vote
1answer
705 views

Raspberry Pi Internet Issues

On my raspberry Pi 3B, attempting to access the internet for downloads fails. Anything that uses it (chromium, apt-get, etc) does not work, giving errors such as DNS server not found, or just hanging. ...
1
vote
0answers
575 views

Issue on Display Resolution

I am unable to set the correct screen resolution when trying to connect TV/Monitor(via HDMI) with RaspberryPi3 at runtime, the following are the steps: Disconnect TV if already connected Boot ...
1
vote
2answers
62 views

RPI Ethernet Gadget Intermediary Theory

I am brand new to these forums so I apologize if I posted this in the wrong place but I had an idea that originated when I heard about the RPI Zero's ability to act as a USB Gadget or HID Device and I ...
0
votes
0answers
6 views

GPIO vs I2C SMBUS2

This example scans for any I2C slave address current on the I2C bus. (I am using a RPi 3B+ with raspbian buster from september release) Script trial_smbus.py: from smbus2 import SMBus channel = 1 ...
0
votes
1answer
18 views

4 Displays with diffrent output using Raspberry Pis

Core Problem: I need 4 displays to show diffrent output (simple images) For this kind of "Video Wall" problem, most solutions recommend one RPi for each display/monitor in a master/slave ...
0
votes
0answers
29 views

Raspberry Pi 3 B+ (Buster) can't control Dynamixel AX-12A with Raspberry Pi 3 B+ (Buster) with half duplex communication

I have a project to make mobile robot with Dynamixel AX-12A as the wheel, so i changes the AX-12A to Wheel Mode with CM-530 and it works well. I follow the guide from http://www.oppedijk.com/robotics/...
0
votes
0answers
8 views

Rainbow screen issue with raspberry pi 3 model b+

I am using Raspberry pi 3 Model B+ and using Ubuntu Mate operating system. I am also using raspberry pi 3 supportable original charger of 5.1V 2.5A. still i am facing the same rainbow screen issue on ...
0
votes
0answers
22 views

How to create a person or head (not face) detection using open CV that are not too slow when run in Raspberry Pi 3B+?

Hello guys my problem is creating a program that can detect the head(not face) or human detection for my project One of the program that i see is too slow for raspberry pi 3B+ which is this : https:/...
0
votes
0answers
31 views

Raspberry Pi 3B+ successfully connect and pair but can't receive data from OBD II

Hello guys my problem is i cant recieve any data from OBD II to Raspberry Pi 3B+ Here the materials that i use: Raspberry pi 3B+ ELM327 -> OBD II Operating System of Raspberry Pi -> https://medium....
0
votes
0answers
39 views

How do I read all registers of an INA219 sensor via SMBus in Python at once?

I'm trying to Connect my Raspberry Pi 3B+ with a Raspbian 10 to an INA219 current sensor (that also returns voltage and a premultiplied power) via SMBus in Python 3.7. After destroying one Raspberry ...
0
votes
0answers
21 views

Timed trigger for GPIO input

I'm running a raspberry pi system that records fish as they swim passed an IR break beam sensor at a fish ladder. So far the system works well but I'm trying to cut down some of the false triggers. ...
0
votes
1answer
15 views

Using pigpios waves and audio output

I am using a Raspberry Pi 3 B+. I want to play audio through the 3.5mm jack and use PWM at the same time or successively to simulate a IR-Remote. I know that you can't use the hardware PWM while ...
0
votes
0answers
12 views

Restarting another python script that is running from a running python script

I know that os.execl(sys.executable, sys.executable, *sys.argv) restarts the current running python script. But what if I have two scripts that are running and under certain conditions, the main ...
0
votes
0answers
43 views

RF ISM 433MHz Module Using Rpi RadioHead Low Speed Problem

I have a rf module 433Mhz which consist of a transmitter and a receiver, I used virtualwire and Radiohead library in Arduino and it's pretty fast. When I shifted that to rpi there were no dedicated ...
0
votes
0answers
11 views

rp3 can't boot openelec

I am using rp3 and trying to install openelec from here and using the second one for rp2 and 3 I tried to format the sd card to fat32 Tried to copy the image after extraction using dd Tried using ...
0
votes
1answer
31 views

Different Boot behavior for cloned Pi

I am running a python script on my Pi 3 B+ and registered it in a crontab @reboot so it is executed when booting the system. On my development Pi everything works fine, but when I clone the SD-Card ...
0
votes
0answers
15 views

CompoundPI unidentified server problem

I am trying to use CompoundPI (https://compoundpi.readthedocs.io/en/release-0.4/quickstart.html) with two RPIs and an ubuntu client. CompoundPI connects multiple RPIs, that each of them has a picamera,...
0
votes
0answers
45 views

Rapberry Pi 3 | Chromium Aw Snap

I'm running into a recurring issue and I can't seem to find a resolution for it that works. Pi info: Linux version 4.19.79-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-...
0
votes
0answers
20 views

bind event from evdev to GUI wxpython

I have buttons and joystick as in the image below and I am reading events from these inputs on raspbian with the evdev library, I am also running a GUI using wxpython. My question is how can I bind ...
0
votes
0answers
31 views

Getting error on Raspberry pi 3 while trying to run chromium in app mode

$chromium-browser --window-size=1080,960 --window-position=0,0 --app=/home/pi/Desktop/python/LMMS.html --disable-quic --enable-tcp-fast-open --ppapi-flash-path=/usr/lib/chromium-browser/...
0
votes
0answers
29 views

unable to scan the ip address of Raspberry pi 3 B+ by using advance ip scanner

I have connected the raspberry pi to the laptop without using Ethernet cable (I am getting power (5v) from the laptop). I have inserted a file in the SD card of Raspberry Pi for WiFi connection ...
0
votes
0answers
45 views

Enable Fine Timing Measurement (FTM) on Raspberry Pi 3B+

Is there any way I could create a mesh of Raspberry Pi 3B+ access points supporting the IEEE 802.11mc standard? I'm interested in experimenting with the Wi-Fi RTT Android API for indoor positioning ...
0
votes
0answers
40 views

Why the script hang for 2 days?

I am running a python script to check the internet connection of a wifi network. It is being run for every 10minutes. Afwer a one month of working, the scheduler is not invoking the actual function ...
0
votes
0answers
104 views

VLC stream RTSP USB webcam

I'm trying to stream a usb camera using VLC. I used this page to get it working on a pi zero with a raspberry pi camera attached to it. On a second RPI 3B+ I'd like to do the same only with a USB ...
0
votes
1answer
42 views

Raspberry Pi 3B+ input pin strange behavior

I have few switches connected to Raspberry Pi inputs. Internal pull up resistors are enabled. When I connect pin to the ground Raspberry Pi behave fine - pin state is low. However when I disconnect ...
0
votes
0answers
22 views

Mode of configuration on Zigbee

I connected one Zigbee with an overlay shield fixed on the RaspberryPi and one Zigbee attached to a vibration sensor. What mode should I configure on the Zigbee's?
0
votes
0answers
22 views

Raspberry PI 3B+ won't connect to smartphone Wi-Fi hotspot if it's “Shared wifi” instead of 4G+

I have a Samsung Galaxy S8 and a Raspberry PI 3B+. The PI can connect to a normal Wi-Fi without any problems. The PI can connect to my S8's hotspot if internet is from 4G(+) The PI CAN NOT CONNECT to ...
0
votes
0answers
29 views

chromium os on rpi3 is not supporting video streaming nor I can watch live or other videos on Chrome except for YouTube

I have installed chromium os on rpi3 b+ and while Playing any live video or any other video except on YouTube it's showing video not supported what should I do to fix this issue please help
0
votes
1answer
65 views

Raspberrypi unable to read 2000 ppm encoder

I am using a DC motor attached with a 2000 ppm incremental encoder. I am using RPI to count the number of ticks, my code works fine but I am not able to calculate all the 2000 ticks. Any help would be ...
0
votes
0answers
34 views

kernel warning in dmesg

I've bought a new 3B+ and when I add dtdebug=1 to config.txt in /boot the following shows up in dmesg. I'm also having a problem where a GPIO extension board isn't being picked up at all, is this ...
0
votes
1answer
119 views

New RPi OS kernel panics with VFS: Unable to mount root fs on unknown-block(179,2) not using NOOBS

Hi I have 6 Raspberry Pis and none of them have encountered this error when using this EXACT setup. I boot up. Get a bunch of messages telling me that my CPU swapper is not tainted (not official ...
0
votes
0answers
40 views

Installing HY463xx touchscreen driver

I am trying to install HY463 touch screen driver on to raspberrypi-cm3 buster lite. I have installed drivers before. But Their website does not provide any Makefile or any documentation for me to ...
0
votes
0answers
79 views

No ethernet on RPi 3B+

I have 3 RPi 3B+, all exhibit the same behaviour. 2 were bought a while ago, one more recently. When starting, on lucky days, they will get an IP from DHCP. If not lucky or upon first reboot, they no ...
0
votes
1answer
73 views

Why the message “raspberrypi dhclient: send_packet: Network is unreachable”?

I am having a raspberry pi jessie OS. I configured it as ethernet to ethernet router. eth0 is connected to a modem and eth1 is actually a usb to eth converter. Rpi get internet through the eth0 ...
0
votes
0answers
28 views

Combining potentiometers to register as buttons

Does anyone know how I could use 2 potentiometers (1 for vertical axis, other for horizontal) and combine them to register as buttons? I want to make a shifter for sim racing and I want to combine 2 ...
0
votes
0answers
23 views

How can we acquire an analog signal having both positive and negative parts , i.e. a bipolar signal, using Raspberry pi3 B+ module?

I am using raspberry pi 3 B+ board. I have to acquire analog voltage signal having both positive and negative parts, i.e. a bipolar signal How can i acquire this signal with the R-pi? I have tried ...
0
votes
1answer
79 views

RPi4B PCA9685 PWM Controlling Servo Problem

I have this RPi3 that I am running a bunch codes on it. It is communicating with a server and also I have python supervisor running on it. Now I am trying to set up the same system on RPi4. For some ...
0
votes
0answers
46 views

dnsmasq DHCP refusing to work. NordVPN hotspot on Raspberry Pi

I'm trying to set up a NordVPN hotspot on my Raspberry Pi 3B+ so I can connect it to my smart tv and get rid of Netflix region restrictions. I have everything set up properly but still dnsmasq DHCP ...
0
votes
0answers
35 views

Logitech F310 hot plug working on Pi 3 B+ but not on Pi Zero W

I wrote software in C for my work that reads Logitech F310 controller input and controls our vehicle accordingly. I wanted my software to be fault-tolerant, so I added code that checks the presence of ...
0
votes
0answers
75 views

Why UDP connection from hotspot raspberry doesn't work

To start with I have to say I have seen few similar questions but none of those could help me with resolving my problem. My setup is, two raspberry Pi 3 B+ with Raspberian on board(updated). One of ...
0
votes
0answers
33 views

When I install volumio in my raspberry, I got the error as below, how to solve the error:Failed to open ALSA device “hw:1,0”

When I install Volumio OS in my raspberry 3b+ and plan to play music withe it, but when I play a music from the GUI of volumio, I just got the error as "Failed to open ALSA device "hw:1,0";No such ...
0
votes
0answers
35 views

irsend pauses for significantly too long

I'm having a problem replaying a raw sequence using irsend. The sequence below is very simple. Very long pulse (6700us), followed by a very long pause (3400us) followed by two short pulses and two ...
0
votes
0answers
56 views

Installing PiVPN failed to connect port 443

https://www.youtube.com/watch?v=WA7QTM9hovQ&t=119s The first time I tried to install PiVPN on my Raspberry Pi 3 B+ (Linux raspberrypi 4.19.58-v7, Raspbian GNU/Linux 10 (buster)) with the steps in ...
0
votes
0answers
79 views

Audio output not working

I bought a raspberry pi3b+ for my son that is connected to the TV, I installed both raspian and lakka and i configure it, but there is no sound coming from the TV via the HDMI port. After several ...
0
votes
0answers
56 views

RPI GSM Add-on SIM800 AT commands are not working

I am trying to send sms using RPI Add on v22 module and Raspberry-pi 3+. I have mounted this module on top of Raspberry-pi. When I use minicome using minicom -D /dev/ttyS0 -b 115200 -o I get the ...
0
votes
1answer
155 views

Can't use my Raspberry Pi 3 B+ for I2C in high speed mode

I've been trying to use a Raspberry Pi 3 B+ to get data from an accelerometer, namely an ADXL 357, via I2C but the problem is that the data rate is about 200 Hz or even less. I tried to set the ...
0
votes
0answers
27 views

RaspberryPI use with 3G/4G dongle

I've been looking into a project which would require me to enable my PI to have a remote internet connection. I'm wondering if the PI is able to use a 3G/4G dongle for this? If it can, does anyone ...