Questions tagged [pulseaudio]

a network-capable, multi-platform sound server.

Filter by
Sorted by
Tagged with
0
votes
0answers
16 views

How can i read the actual time of the played Audio from VLC player?

i want to play a sound on my Raspberry over the VLC media player. I want to change between two songs, but dont want to restart the song from the beginning at 00:00.00. Instead i want to read the ...
0
votes
0answers
23 views

Noisy sound when using bluetooth HFP with Ofono and pulseaudio

Following everything mentionned here On my Raspberry Pi 4 with Raspbian Bullseye. I have an issue with the incoming and outgoing sound of HFP when calling with my paired phone. I can hear and speak ...
0
votes
1answer
18 views

Set two sinks with pulseaudio

I have two raop speakers that I can stream audio to from my Raspberry pi using Pulseaudio and AirConnect. At the moment, I can set either one as the default sink and it works as expected. I would like ...
2
votes
1answer
72 views

Bluetooth disconnects when SSH connection closes (RPi Zero 2)

I am trying to use a headless Rpi Zero 2 (Raspian 11) for bluetooth audio streaming. I can establish a connection to a bluetooth speaker using bluetoothctl connect XX:XX:XX:XX:XX:XX from an SSH ...
0
votes
0answers
25 views

Launch audio python application on startup - pulseaudio

After much trial and error where I couldn't get systemd, cron, or other methods to work, I found that at least when running the desktop, pulseaudio launches with the desktop, and must be running ...
0
votes
0answers
38 views

Simultaneous multi output with LibreELEC

I am using LibreELEC now for a while and try to add a few Bluetooth speakers. So, does anyone know how to simultaneously output music via the analog output and bluetooth using LibreELEC and pulseaudio?...
1
vote
1answer
130 views

How to stop pulseaudio from deleting your .asoundrc file on startup?

I have a Raspberry Pi 4 and have been messing around with Pulseaudio and Alsa a lot lately. I wrote an asoundrc file which I want the system to run every time it's on. However, Pulseaudio keeps ...
0
votes
0answers
24 views

Calling pulseaudio: paplay - p record.wav from python script doesn't work

Objective: run a wav file from python on a Bluetooth headset paired to the raspberry Pi. So far my code works well when I run it on the raspberry pi in python. Once I call the same python script from ....
0
votes
1answer
79 views

Unable to get Qt5 audio to work using pulseaudio on Rpi 4

I'm on Raspberry pi 4 and the OS is DietPi I configured ALSA so I could play an audio file successfully through HDMI using aplay [an audio file] Then launched the PyQt5 app but got PulseAudioService: ...
0
votes
2answers
230 views

bluetooth is not working after updation

am using pi 4 8GB for last 6 months everything was going well. Last week i updated my OS(raspbian). After that bluetooth is not working properly. i can able to pair a device successfully, but am not ...
0
votes
0answers
16 views

Pulseaudio hangs when I load hdmi2 alsa sound card

I have a raspberry pi 4, and pulseaudio 9 running on it. I am writing a custom pulseaudio module which will load the 3 available sound cards - hdmi1, hdmi2 and headphones. the command i am using is ...
0
votes
0answers
87 views

Raspberry Pi 4 not detecting Wireless headphones

Raspberry Pi 4 is not detecting my realme Buds Wireless Pro headphones I tried trouble shooting the issue by referring the following : https://peppe8o.com/fixed-connect-bluetooth-headphones-with-your-...
0
votes
0answers
357 views

Raspberry Pi Audio - Can not get 5.1 Surround Sound Audio to output to HDMI

I have an applications where I need to do the following on a Raspberry Pi (3, 4, and/or Zero) running the latest version of Raspberry Pi OS: Play an AC3 file with 5.1 audio over HDMI. Play an MP3 or ...
3
votes
2answers
213 views

How to make pulseaudio use a surround profile?

I recently upgraded my Pi 400 to the latest Os version that now uses Pulseaudio by default. I have my Pi connected to an AVR (Harman Kardon 151S) that is connected to a 5.1 setup of loudspeakers. ...
0
votes
0answers
55 views

Raspberry Pi 4 B audio stream from phone clipping with multiple devices

Tl;Dr Multiple bluetooth devices throttle bl-data causing audio skipping. Can external bl-dongle be set up to be used in one application and integrated module in other? I'm trying to setup Raspberry ...
0
votes
0answers
113 views

Record USB System Audio and Send to Named Pipe

I am trying to get audio to LedFx, a controller for sound reactive LEDs. One of the ways it can read audio through its docker container is through a named pipe. The command ffmpeg -y -i http://wms-15....
0
votes
0answers
165 views

initialization problem with PyAudio on WM8960 audio card. No input sound at first launch

First at all I am on a Raspberry Zero W. I have blacklisted the snd_bcm2835 by adding blacklist snd_bcm2835 in the sudo nano /etc/modprobe.d/raspi-blacklist.conf I don't know really what it does. Its ...
0
votes
1answer
368 views

Python script not playing audio when run through systemd

After trying every possible solution online I am posting this question. I have a python script that runs on boot with the help of systemd. Everything worked fine till I installed a fresh raspian ...
3
votes
2answers
12k views

How to fix audio after December 2020 update

I recently updated my Pi4 to the latest version of Raspberry Pi OS, following all the steps to change the audio software to pulseaudio - from the instructions on the website. https://www.raspberrypi....
1
vote
1answer
421 views

No audio through 3.5mm jack when using QtMultimedia on RPI4B

I am currently trying to run a PYQT5 GUI on my RPI 4B using PYQT5 and its QtMultimedia. I have 2 speakers (running through an amp) connected through the 3.5mm jack (BMC2835 headphones), and while ...
0
votes
0answers
1k views

How to set default ALSA input/output in pusleaudio on LibreELEC?

I'm using Raspberry Pi 3 Model B as LibreElec for Kodi. My Pi is connect on TV on HDMI. In kodi, when I select audio outputs HDMI or Jack it play sound well. But when I select Pulseaudio, it don't ...
1
vote
0answers
764 views

LibreELEC : read-only files system

I'm using PI as LibreElec for Kodi. I'm root in SSH and trying to modify, the file /etc/pulse/default.pa or /etc/pulse/daemon.conf for PulseAudio for an other problem. But all the directory is on read-...
0
votes
0answers
129 views

connecting bluetooth audio sink to PiFmAdv

I have a raspberry pi configured as a bluetooth audio sink using this post: Another How to turn your Pi in a Bluetooth Speaker Tutorial. Which uses pulseaudio. I also have the PiFmAdv configured and ...
1
vote
1answer
203 views

I want to allow two instances of mPlayer to play music over a single bluetooth link to a speaker

I have an application which makes two uses of playing two files at the same time. The first is where it plays a white-noise file very quietly and continuously so that the sound-card does not go to ...
0
votes
1answer
36 views

How to control PulsAudio programmatically?

I want to set up my Raspberry Pi as Bluetooth-Audio-Receiver which transports the audio via AUX to my speakers. I've read that there is PulseAudio which would solve my problem. But I want to be able ...
0
votes
1answer
186 views

No audio from HDMI, Bluetooth, or Jack port (Raspberry Pi 4B)

new user here. Finally got around to using my raspberry pi 4B this week and I'm having troubles getting audio from all 3 methods mentioned in the title. I've researched here and there for hours about ...
0
votes
1answer
637 views

Raspberry pi 4 vlc isn't giving out audio

The below is the terminal log when I ran vlc. Could any one help me whats the issue here. I'm able to hear audio from youtube in chrome but not through vlc when i play file. Video is fine. The ...
1
vote
0answers
366 views

No sound with VLC on raspbian

I just re-installed raspbian on a PI3: after a raspbian update (apt update/upgrade): . there was sound with VLC, but video freezed . there was video with OMXplayer, but no sound . KODI was working as ...
2
votes
1answer
411 views

Chopping audio over bluetooth with PulseAudio

I have an issue with a Raspberry Pi 3B+ and audio over bluetooth, it is configured with PulseAudio and BlueZ to connect my phone on the Pi, it works great but there is minor audio cuts (less than 0.5s)...
1
vote
1answer
798 views

Read Incoming Bluetooth Audio On Pi With Python

this is my first post on here! I am trying to make my raspberry pi 3 a bluetooth speaker which synchronizes beat of the music being played from a phone to an LED light strip. For the LED light ...
1
vote
2answers
208 views

Can I use Raspberry Pi as a USB speaker?

Now I have A: Desktop PC with Arch Linux B: Raspberry Pi 3 with Raspbian Buster connected with a speaker and I'd like to use B as a wired speaker of A. By "wired", I mean that A and B are connected ...
1
vote
1answer
34 views

How to stream AudioIN by PulseAudio

I'm new and I can't speak well in Eng. I need Your help. A few days ago, I bought UCA222 and I need to stream AudioIN by RTSP or sth like this. I was tried by OBS on RPi, but something is broken. Now,...
2
votes
2answers
120 views

Stream all system audio to Raspberry Pi from elementryos

I have this setup The old HP server I'm using as a desktop, but it doesn't have audio hardware at all - nothing in the bios, nothing on the motherboard. I want all audio from any application to go ...
2
votes
0answers
79 views

Losing first few seconds of audio

So on my Raspberry pi when I play audio through the headphone jack, the first few seconds of sound are lost. However, I if I immediately play the sound again, the audio works fine from the very ...
1
vote
0answers
35 views

How do I get audio working from inside LXD container?

I'm following the instructions in this blog entry: https://blog.simos.info/running-x11-software-in-lxd-containers/ where the container connects to the unix socket on the host: unix:/run/user/1000/...
1
vote
0answers
318 views

Route native Alsa app audio to bluetooth speaker with Pulseaudio?

I have an app that only supports Alsa, and I want to route its audio to a Bluetooth speaker. I'm attempting to use Pulseaudio to do it if that is possible. The Bluetooth speaker is paired and I can ...
0
votes
1answer
349 views

RPI 4 - HDMI audio dropping on the begining of videos

I use a RP 4 with raspbian as a basic media center. It is running a mopidy music server using alsamixer. The sound via the HDMI is has no dropping. But with mp4s, large or small, the issue is the same....
2
votes
1answer
95 views

Separate video audio output two Raspberry Pis

I own a projector which is obviously on the opposite site of the room than the audio system. I'd like to keep everything cableless, so one RPI is connected to the audio system, the other one to the ...
0
votes
0answers
70 views

pulseaudio server RP3 can't play audio from network client and local client at the same time

I have a Raspberry Pi 3 B connected to my speakers through a usb soundinterface. It's also connected via usb midi to a masterkeyboard which I use to play piano and doesn't have it's own speakers. On ...
1
vote
0answers
96 views

Software/Framework Recommendations [closed]

I'm prototyping a device using a raspberry pi 3b+. Here are some of the requirements I'm hoping to fulfill. *When I say "device" I'm referring to the raspberry pi. Device Requirements Stream ...
0
votes
0answers
707 views

VLC player can't play larger media files on raspbian

I am using Pi 4 for an week. I tried some media players available on repository like vlc,kodi,mpv etc. I have noticed none of them can play a media file(mp4,avi,mkv) smoothly. So I am stuck with vlc. ...
1
vote
0answers
2k views

Raspi 4 - PulseAudio Server issues

I am currently trying to setup a pulseaudio server on a new Raspberry Pi 4. In our office, we like to listen to music but passing the aux cord around is always a pain, so we thought we could use a ...
1
vote
1answer
204 views

How to get song information using PulseAudio?

I want to have a script that is continuously running in the background while I connect my phone via Bluetooth to play music. I need the script to get the total time length of the track, the current ...
1
vote
0answers
405 views

Best way to sync OMXPlayer video with audio stream?

I am having issues getting OMXPlayer video played on a TV via HDMI to sync with audio streamed over the network. My thought was delay the video output by ~500 ms then use pavucontrol to fine tune the ...
1
vote
0answers
526 views

Mopidy with PulseAudio sound over TCP

So I have been struggling with this for a while now and looked everywhere for solutions. I have installed Mopidy with Spotify extension on my Raspberry Pi 3B but I can't seem to get the pulseaudio ...
2
votes
1answer
123 views

Using Pi to stream audio from PC to stereo

I would like to use my pi to stream the audio from my pc to my stereo. I am using the method described here. Unfortunately, my computer does not detect the pi. Some details about my installation: ...
5
votes
1answer
1k views

Bluetooth Blues

I've discovered again that cursing and swearing at inanimate objects doesn't actually improve things, so I'll try posting a question. A couple of months ago I attempted a fairly ambitious project (...
3
votes
1answer
2k views

Raspberry Pi 3 bluetooth stops working after a while

I use it to connect to a speaker (as a pulseaudio sink) dmesg | grep Blue shows the following: [ 14.034501] Bluetooth: Core ver 2.22 [ 14.034587] Bluetooth: HCI device and connection manager ...
2
votes
0answers
290 views

Pi with PulseAudio over wifi - can't connect

I was trying to set up my RPi 1 as audio device for my laptop and found this answer. On the RPi all the steps worked fine, except that /etc/default/pulseaudio is empty. But in the linked answer the ...
1
vote
1answer
100 views

How can I find the answer to "What does Raspbian use to handle audio?"

I think some releases of Raspbian handle audio differently than the previous version. If the use of ALSA or Pulse Audio (or some other software) has changed with Raspbian releases, what do I need to ...