Questions tagged [putty]

PuTTY is a terminal emulator and serial console with networking capabilities (telnet, SSH, etc.) originally developed for MS Windows but ported to other common platforms as well.

Filter by
Sorted by
Tagged with
-1
votes
1answer
53 views

Getting Ip address 169.254.xx.xx

My question is not the same as other question like this. In the following i will describe why. When I tried to connect raspberry (3 b+) to laptop, via Puttty (laptop's OS is Windows 10), I could not ...
0
votes
1answer
281 views

Cannot get IP address. Cannot access /etc/network/interfaces

This is the first time I use my Raspberry Pi 3 with Raspbian Lite. Both my PC and the Rasp are on the same WPA2-personal network. I am trying to get an IP address for the Raspberry in order to SSH ...
2
votes
2answers
340 views

Can't SSH by name on stretch; can on jessie

I just updated my Pi0W's to stretch, from jessie, and now putty won't let me connect by name (e.g. pi@computername.local) like it used to. It does work as expected if I use the IP. But the odd thing ...
0
votes
1answer
353 views

Cannot connect Raspberry Pi 3 Model B to MATLAB R2015b using MATLAB Rasp Pi support package.

When I use the code: mypi = raspi('192.168.0.12','pi','raspberry') It shows this error: Error using raspi (line 169) Cannot establish a TCP/IP connection to the board with device address "192....
1
vote
2answers
76 views

Connection raspberry pi 3 B + via putty, by using mobile internet

I am a newbie and perhaps this issue is incorrect. I am going to connect raspberry (3B+) with the laptop, then connect it via OpenSSH (OS is Windows, + WSL) or VNC. I am using mobile internet. About ...
1
vote
1answer
24 views

How to avoid resizing (shrink) of SD card and connection refused error in putty for installing raspberry pi

I am new with raspberry pi, I want to start the raspberry pi 3,Model B on laptop connected with ethernet cable, but as I want to create a ssh file( with no .txt extension)for the network error:...
0
votes
0answers
26 views

Couldn't SSH headlessly on my rpi4

I am trying to SSH my rpi 4 having kali linux etchered to it's memory card but Putty says "Network error: Connection refused" and Solar Putty says "Disconnect (host hard-reset)!. It has SSH file ...
1
vote
2answers
49 views

Set speaker jack in Lakka to default?

I have a small sound issue in Lakka (on the Pi 3 model B+) and was wondering if anyone knows how to fix it. Basically, everytime I start Lakka I have no sound using the Speaker jack. This answer ...
2
votes
5answers
5k views

Pi desktop through PuTTY and Xming

I am trying to connect my Pi to my laptop, I have finished installing the OS and through PuTTY and Xming, I am trying to setup the connection but now startlxde command doesn't work. Can someone help ...
0
votes
1answer
747 views

RPi 3 SSH error- Destination host unreachable on Kali Linux

I got my Raspberry Pi 3 Model B shipped recently. As I don't have any HDMI display, I ran to my neighbor's house to test my Pi. I used the memory card provided with the kit which had NOOBS ...
0
votes
1answer
27 views

I want to give Internet to the Raspberry Pi via PuTTy

I can't connect the Raspberry Pi to the internet due to VLAN vulnerabilities. I can connect the Raspberry Pi via Ethernet just in the network to connect to PuTTy. I want to connect the Raspberry Pi ...
0
votes
1answer
5k views

PuTTY - Error: “Software caused connection abort”

I have a problem with my Raspberry Pi 3. When I want to connect to my Raspi, after a few attempts it works, but after while (like 1 minute) it says this error: "Software caused connection abort". I ...
0
votes
1answer
3k views

ping request cannot find raspberrypi.mshome.net address

i have problem to find my RPI address.. currently just connect RPI using my laptop monitor. i cannot find the current IP address for my PI using command prompt in windows7. i have try to ping it by ...
1
vote
1answer
99 views

Accessing a Virtual Environment from IDLE3 shell?

On my pi3 I have created a virtual environment with Python3. I run my pi headless, using my Windows 10 PC. I access the pi with 3 apps: - PuTTY for terminal usage; - WinSCP for a file Explorer; and ...
0
votes
2answers
241 views

Raspberry Pi configuration is not opening when connected via Windows VNC

My Rpi Model 3B+ is connected through my laptop using VNC instead of HDMI and monitor, unfortunately I ran into some problems,I tried making the Rpi Headless by following this video on YT: https://www....
0
votes
0answers
21 views

Unable to call .Py on Raspberry Pi using Plink

I am designing a .bat file that uses Plink to execute python files located on a Raspberry Pi. Ideally a user will click on this bat file to execute python code on the Raspberry Pi without having to do ...
1
vote
1answer
60 views

why does my raspberrypi 3B not able to reboot each time power is shut down?

I installed raspberian in my raspberrypi. It worked for the first time. But when I shut it down, it didn't reboot again. So, I had to format the sdcard and reinstall the raspberian again. And ...
0
votes
1answer
104 views

Trying to connect to my raspi with SSH, cant be pinged but can connect to the internet

I used to be able to use putty to connect to my pi via ssh. However, after having left it on for a while and trying to connect a couple of days later, I was faced with the message "putty fatal error: ...
0
votes
2answers
373 views

Raspberry Pi 3B - Headless - No Internet - Ethernet LAN - Router IP Assigned - Error to Connect

Don't know what I am doing wrong but since I had connected Pi to router's LAN port, I am not able to SSH via any OS. Be it Linux or Windows. I am able to connect it easily if I choose WiFi over ...
1
vote
0answers
32 views

Can't SSH into raspberry pi 3 A+ when connected to router

In my Office, we have a network domain. On this network, we have a router that is connected from the network to the router using Ethernet (duh). My raspberry pi 3 A+ is connected using WiFi to this ...
0
votes
1answer
98 views

putty network unreachable error help

I am trying to run my raspberry pi by using putty but i keep getting network is unreachable. I have try run it on other device it was working well
0
votes
1answer
37 views

How to restore SSH session after network failure on client PC [duplicate]

Sometimes my SSH session of my PC and Raspberry Pi is aborted, due to some network issues, eg. WIFI disconnected and connected back on PC. After that SSH client on PC (Putty) is saying that existing ...
0
votes
0answers
37 views

Can't Login To Pi Model 3B+ Via Serial Connection To PC Using PuTTY

Ok, so basically I have installed raspbian-stretch onto the pi using an SD card. I was having issues getting anything to show over the serial connection using putty so I connected the pi to a TV using ...
1
vote
3answers
29k views

SSH: Access denied

I'm trying to access my RPi 3 via Putty from a Windows 10 laptop. When it prompts me to choose the user I type in pi. I have tried typing in raspberry as the password, resetting the password with sudo ...
0
votes
1answer
65 views

Use Raspberry Pi with SSH disabled and no access to the screen

I recently reinstalled Debian Jessie on a Pi 3. When I turn it on the screen is blank and my keyboard does not light up - before the reinstall, the GUI would only start and the keyboard would light up ...
-1
votes
1answer
102 views

PuTTY can't launch X programs when IPv6 is disabled

I'm accessing my Raspberry Pi 3 with PuTTY, and using X11 programs like GParted through ssh connection. It was perfectly working until I turned off IPv6 by adding the following line to /etc/sysctl....
1
vote
1answer
59 views

SSH Access with passwordless Private Key file

I'm using an rsa 4096-bit keypair to gain passwordless access to a raspberry pi from another pi. If I use the private key on Windows with PuTTY, I am able to access the target pi fine. However, if I ...
0
votes
1answer
151 views

Python: `python DT22logger.py` error using PUTTY

I have done configuring some of the commands in making the DHT22 Temperature Sensor work. I have done configuring some codes in config.json now I am up to this python DHT22logger.py but I am getting ...
3
votes
2answers
1k views

Can I SSH into my pi via a USB-to-USB connection with my laptop?

My laptop does not have a built-in ethernet port because it is new so I used to SSH with my pi via a USB-ethernet adapter but I recently went to Russia and forgot the adapter in the US and since I am ...
1
vote
3answers
871 views

First setup of Raspberry Pi Zero W

I've just bought a new Raspberry Pi Zero W v1.1 2017 and i already have a connection problem with putty over ssh. Things i've done so far: downloaded 2017-09-07-raspbian-stretch.img and burned with ...
2
votes
2answers
5k views

Displaying image from PI via ssh and xming on my PC

Firstly, I've googled around, but got myself horribly confused; hence this question. I have a headless/keyboardless Raspberry pi with a camera board on it, that I connect to via ssh using my windows ...
0
votes
2answers
72 views

Line Wrapping in nano from PuTTY

I have somehow altered my setup such that editing text files in nano via PuTTY is line wrapping. I have tried numerous suggestions for forcing the nano editor to not wrap lines. My latest attempt ...
0
votes
1answer
74 views

Using Putty and VNC

I have an RPi3B+ which I can connect to through either Putty or VNC, both work fine. I've installed virtualenv with pip install virtualenv virtualenvwrapper. When I'm connected through Putty and I ...
2
votes
1answer
91 views

WinSCP to Pi from external network (DDNS/Port forward SSH)

I have setup home network to use DDNS such that I can login to router from outside network using the custom domain. I have assigned static (local) IP address to raspberry Pi. I have port forwarded ...
0
votes
1answer
1k views

Pygame run on external screen using ssh

I have a raspberry pi with a lcd screen attached witch is mirroring the raspberry pi's display. I want to show a pygame window on it. When I run: python main1.py on the ripi terminal the pygame window ...
0
votes
1answer
393 views

Regarding RPi ethernet Hostname and IP address for Putty

QUICK QUESTION: Laptop has wifi. I have ethernet cable connecting laptop and raspberry pi to share wifi from laptop to pi. How to check the ethernet ip address of pi on laptop? (ipconfig doesn't work) ...
10
votes
5answers
45k views

How can I access my Raspbian Wheezy installation via SSH? Is it enabled by default?

Is SSH enabled by default on the Raspbian Wheezy 7 install image? And if it is, which IP address is used so I can access Pi via PuTTY and Filezila? Important! As per Philippe Lhardy's answer ...
1
vote
5answers
2k views

Cannot connect to raspberry pi using ethernet cable and putty

I am new to the Raspberry Pi. I am using Raspberry Pi 2. I have installed Raspbian OS to the SD card using Windows win32DiskImager. The OS to which I have connected the Pi is Windows 7, SSH using ...
0
votes
3answers
4k views

Unable to connect to Raspberry Pi 3 Model B even after enabling SSH

I just got my Raspberry Pi 3 Model B today and after installing the OS image onto the microSD card along with the blank ssh file in the boot directory, I turned on my Pi and the OS seemed to be loaded ...
1
vote
1answer
3k views

Connect PC to Rpi3 using serial connexion in puTTY

As specified in the title, I try to connect my Rpi 3 running Raspbian Jessie Lite from 2017-07-05 to my Windows 10 PC using puTTY on serial mode with this cable. I tried to follow a few tutorials ...
2
votes
1answer
2k views

How to use photoelectronic sensor (keyence PZ2-42) with Raspberry Pi

I want to use the photoelectronic with the Raspberry Pi for a micromouse maze. Using sensors to detect the presence of micromouse at specific locations. I was given all this from my father since he'...
1
vote
1answer
117 views

Using SSH on RasPi3 with existing GnuPG Key

I want to use public/private key act for logging in to my raspberry pi. I have an existing public key (GnuPG), can i also use this one, or do i have to use putty keys (.ppk) for this? If this is ...
0
votes
1answer
96 views

RP3 Pins not working?

I have a small problem: I want to use pin 13 [GPIO 27]. (pin 13 [GPIO 27] should output 3.3V) I tried [in Shell (Putty)]: gpio mode 13 out gpio write 13 1 but nothing happened. I also tried pin 40 ...
1
vote
0answers
309 views

Pi hangs but still responds to ping

I have a Raspberry Pi 3b with Octoprint v1.3.5. Twice now Octoprint has automatically downloaded updates and when I try to access the pi again it becomes randomly unresponsive. The Octoprint webpage ...
4
votes
4answers
889 views

Putty error while connecting Raspberry Pi to my computer

With reference to the post SSH for Raspberry Pi using a PC, I tried the same steps and got the same error: Network error, connection refused In the post I mentioned, I saw an answer mentioning "...
12
votes
4answers
143k views

Connect to Raspberry Pi over ssh: connection refused (from putty)

I have a raspberry running raspbian, and I want to connect over SSH, but something is happening. On the raspberry I have run nmap and port 22 says: OPEN; the ssh process is running and fine. But I ...
1
vote
0answers
591 views

“Server unexpectedly closed network connection”

I have a raspberry Pi running Debian Jessie. All use to work fine until 3 August. Since then I have been looking for answers and trying different suggestions but to no avail. For some reason when I ...
1
vote
0answers
75 views

PuTTY network error when running Python scripts on a Raspberry Pi

I run Python scripts on my Raspberry Pi from my Android device and it always works for 3 or 4 times, but when I do it more, PuTTY tells me the following: Network error: Software caused connection ...
2
votes
1answer
2k views

How do I run a shell file on startup (before login)? [duplicate]

I have a bash file I want to run when I turn on the Pi. I have seen a few solutions utilizing init d or adding it to some other file or directory, but the problem is that when I sign in with SSH they ...
1
vote
4answers
943 views

Connection between Raspberry Pi and PuTTY

I've download the file Raspbian jessie with pixel.img. I wrote the .img-file with Win32DiskImager to an SD-card. I wrote an IP address in the cmdline.txt file (ip=169.254.10.1). I've put the SD-card ...