The Stack Overflow podcast is back! Listen to an interview with our new CEO.

Questions tagged [python-3]

Use this tag when referring to the Python 3 language. This can include discussions about specific features unique to the language or perhaps when referring to software that requires Python 3 in order to function. Note that general programming questions are often better suited to Stack Overflow; use this tag only where directly relevant to the Pi.

Filter by
Sorted by
Tagged with
9
votes
0answers
14k views

How to install Python 3.7 with SSL? [closed]

I have compiled and installed Python 3.7 on my Raspberry Pi, but SSL is not working. These are the steps I took to install the new Python: Prerequisites: $ sudo apt-get update $ sudo apt-get ...
6
votes
1answer
8k views

Python script fails with 'ImportError' when run from rc.local

So I've tested that my script does attempt to run and I'm recording the error message of Traceback (most recent call last): File "/home/pi/steamFriendStatus_v0.3.py", line 6, in <module> ...
5
votes
4answers
7k views

Do we need multiple versions of Python?

I am new to Linux and going through my installed folder I can see there are four different Python folders in the directory list. python python2.7 python3 python3.2 Do we need all the four versions ...
5
votes
3answers
695 views

Is it necessary to release Raspberry Pi Camera before rebooting? If so how do I do it?

I have a python3 script that uses OpenCV and a Raspberry Pi cam. It runs almost 24/7. Using crontab the pi will reboot every night at midnight and the script will begin running again. This is mostly ...
4
votes
3answers
743 views

Launch a GUI Tkinter program on boot

I am trying to auto launch a Tkinter/Python program when the Raspberry Pi boots up. Ideally I would like to boot the Pi into the console and then launch a GUI Tkinter Python program. In testing – not ...
4
votes
3answers
10k views

I can't download PyCharm for Raspberry Pi 3

I have had my raspberry Pi 3b for a few months so I'm just getting used to it. I would however want to install PyCharm because I want to use my Pi to program on rather than my PC. Any ideas would be ...
3
votes
2answers
815 views

I want to run a Python 3 script on startup and in an endless loop on my Raspberry Pi

I have created a smart vending machine using my Raspberry Pi. For now, I open the Raspberry Pi using SSH and run the script manually for every transaction. I want to automate the process and run the ...
3
votes
2answers
6k views

How fast can GPIO pins toggle?

I'm currently using Python's RPi.GPIO module to toggle some pins, and I want to know how quickly it can do this. I need the pins to be toggled on the schedule of a ~50 mhz FPGA clock, which I'm ...
3
votes
2answers
7k views

Failed to create MMAL component b'vc.ril.camera': Out of memory

I am trying to run a simple script that listens for a button click and then takes a picture. Once two pictures have been taken it compares the two using OpenCV to calculate the difference. I am ...
3
votes
3answers
17k views

How to connect MySQLdb in Python 3?

I want to connect MySQLdb with Raspberry Pi. But when running my program, I get this error: $ sudo python3 readMQ2sql.py Traceback (most recent call last): File "readMQ2sql.py", line 17, in <...
3
votes
1answer
988 views

Installing libraries via pip is taking forever. Raspberry pi 3b+

I tried to install scipy using pip3 install scipy as well as sudo pip3 install scipy and it got stuck at Building wheel for scipy for 45 minutes. Same is the case for cython. What is the fix or it ...
3
votes
2answers
7k views

Pip3 install throwing error on raspberry pi 3 Raspbian-Jessie

I am trying to install a python 3 library on a raspberry pi 3 running Raspbian-Jessie. sudo pip3 install LIBRARY However, regardless of what library I try to install, I am getting this error: ...
3
votes
3answers
2k views

Is it ok to remove all Python?

I have a Raspberry Pi 3 Model B and I installed Raspbian on it using NOOBS. I want to use Python 3.6 only. Is it ok if I uninstall both Python 3.5 and 2.7? Will there be no system problems? If I yes, ...
3
votes
1answer
5k views

How to fix Remote I/O Error Whilst Using i2c OLED

I was using my i2c OLED perfectly well when seemingly for no reason I started getting the Remote I/O Error when I ran my Python program. For some reason this was fixed by installing i2c tools again. ...
3
votes
2answers
2k views

How to generate accurate PWM signals for many servos

I've ran into a bit of an issue with the Raspberry Pi's ability to generate accurate PWM signals for servos. My problem with this is that the servos jitter because of this lack of accuracy. Is there ...
3
votes
1answer
255 views

Turn Up or Down Volume for OMXPlayer 3.5mm Audio Jack

on my raspberry pi i have a speaker wired connected via aux cable to the 3.5mm audio jack. My first question ishow can i get rid of the noise coming out of my 3.5mm audio jack when keys are pressed or ...
3
votes
0answers
484 views

Accelerated Numpy on Pi 3 B+

I'm looking to do some work with NumPy on my Pi 3 B+, and I'm not sure what the deal is with optimization, blas, etc. I installed libatlas using: sudo apt-get install libatlas-base-dev Following ...
2
votes
2answers
516 views

How does Raspbian know it's been installed in a Pi or Compute Module?

I want to design a python script that would allow me to check whether it's currently in a standard Pi 3 or it's in a Compute Module 3. But I have no idea even on how Raspbian OS know itself is ...
2
votes
3answers
3k views

Reinstalling Python3

I purged all the python3 packages and when I try to install python3 again on my raspbian I get this: Setting up python3.5-minimal (3.5.3-1) ... # Empty sitecustomize.py to avoid a dangling symlink ...
2
votes
2answers
687 views

Python3.7 with Numpy on Raspbian

Goal: Install Python3.7 on the Raspberry Pi. Then install Numpy for Python3.7 Found this very useful Github Gist: https://gist.github.com/SeppPenner/6a5a30ebc8f79936fa136c524417761d Ran the ...
2
votes
3answers
841 views

no module named 'speech_recognition'

I installed speech recognition pip install SpeechRecognition ran this import speech_recognition as sr r = sr.Recognizer() with sr.Microphone() as source: audio = r.listen(source) print(r....
2
votes
1answer
985 views

Is there a problem with using deprecated os.popen?

I'm using os.popen() to run terminal commands in multiple projects. I keep reading that os.popen() is deprecated though and I should use Popen() instead, but I haven't been able to get Popen() to ...
2
votes
1answer
843 views

Python 3 interpreter not recognizing a new installed package(python 3.5.3)

I'm new to this RPI world and also to python although I completed the basic courses I'm still getting used to this so I will appreciate your patience I'll try to express my self the best way. I ...
2
votes
1answer
160 views

Raspberry pi 3 RFID RC522 Card UID is not same with USB RFID Reader

I'm working with RFID RC522 using Raspberrypi 3B+. I'm following https://github.com/mxgxw/MFRC522-python this package and works like a charm. I can able to read the data from the card, able to write ...
2
votes
1answer
108 views

GY-291 / ADXL345 weird sensor reading for x, y, z

I've two identical GY-291 / ADXL345 sensors. To read the data I use the python-module (https://pypi.org/project/adxl345/). i2cdetect detects the sensors at address x53 correctly. Unfortunately, data ...
2
votes
1answer
249 views

Use matplotlib on Raspbberrypi

Using The following Code for saving plot locally on raspberry: from numpy import genfromtxt import matplotlib.pyplot as plt import plotly.io as pio y = range(10) x = range(10) plt.title("Adc data") ...
2
votes
1answer
1k views

Upgrading to Latest Numpy Version on Raspberry Pi 3

I'm not sure if this is a Raspberry Pi issue, Raspbian Issue, Python Issue, or all of the above. So forgive me if this is the wrong place to ask this. I just got me a Raspberry Pi 3B+ and installed ...
2
votes
1answer
3k views

Raspberry Pi 3B+ freezes randomly

General setup My RPi is connected to a mouse, keyboard, and monitor. My swap size is set to 1000 MB and I'm not using wifi. Problem The RPi freezes randomly, meaning the GUI is frozen, no SSH ...
2
votes
1answer
7k views

How can I use OpenCV with Python 3 on a Raspberry Pi?

I have installed OpenCV and and access it with Python 2. However, I'm unable to use OpenCV with Python 3. It says "Cannot open shared object". ImportError: libQTtest.so.4: cannot open shared object ...
2
votes
1answer
548 views

Capture image when camera is not covered

I am very new to R Pi, but I know my Python. I am working on a project where I have an always running camera, that is kept in dark. What I need to do is to capture an image when there is light. (lets ...
2
votes
1answer
4k views

Saving graphs using Matplotlib is very slow

I am trying to write a python Code snippet which creates 24 figures and 9 subplot and saves them in the directory. Its taking around 197 sec to create all the 24 figures and save them. This is ...
2
votes
1answer
633 views

Best Python 3.5 library for playing mp3 file on Raspberry pi 0 W

I've already tried VLC library but the cpu reach 100% usage frequently during file playing, I've also the necessity to track the state of the playing so to know when the file is ended etc., Any ideas?
2
votes
1answer
27 views

CE1 not going low for pigpio.spi_open() with flags

I'm attempting to modify joan's test script (https://raspberrypi.stackexchange.com/a/44320/42126) for an RPi SPI master to communicate with an Atmega328P slave. I cannot change which GPIO pins I have ...
2
votes
1answer
38 views

Why no result from os.popen() when script is run from crontab?

When I run this Python3 script from the command line or from Thonny I get correct results. When I run it through crontab the variables ipaddress an ssid stay empty. Can anyone tell me why? Any ...
2
votes
1answer
41 views

RPI project Minecraft Server

me and a project partner are running a Minecraft server off of a RPI and connecting via its wireless feature. we wanted to create a python script which would control an LED and toggle it on/off based ...
2
votes
1answer
61 views

While reading RC522 RFID reader keypad won't work

I am using pimylifeup library to read RFId card. But after id, text = reader.read(), I don't get reading from 4×4 keypad. I tried with both BOARD and BCM numbering to read keypad. I have to exit the ...
2
votes
1answer
2k views

Installation of opencv-contrib-python through pip3 fails

I typed the code pi@raspberrypi:~ $ pip3 install opencv-contrib-python it responded with "Collecting opencv-contrib-python" Could not find a version that satisfies the requirement opencv-contrib-...
2
votes
1answer
254 views

read variable and trigger event - python

I have the following script which increases the counter variable every time a button is pressed. When counter reaches a certain number i.e. 10 lets say I want an event to trigger. from time import ...
2
votes
2answers
16k views

pip cannot confirm SSL certificate: SSL module is not available

I am trying to install openCv for Python 3.6 on my Raspberry Pi 3 Model B+, but somehow it won't connect to the python.org website. I have pip installed for 2.7, 3.0, and 3.6 installed, so when I go ...
2
votes
1answer
2k views

Found a PyPi Package for Opencv-contrib, but can't install using pip

I'm trying to install OpenCV for python with extra modules on my raspberry pi. The OpenCV website has a set of instructions that I have tried with different variations for the past several months. I ...
2
votes
0answers
53 views

Hardware controlled RTS on a Pi4 not working accurately

We need to use RS485 to talk to one of our custom tools. We need to use hardware controlled rts/cts. I've read so many articles about this but nobody ever says it works for them with fast timing and ...
2
votes
0answers
43 views

Waveshare ADDA (ADS1256) full scale input issues

My question is about a problem of full scale output with the Waveshare ADDA ADS1256 card. I use the Waveshare High-Precision AD/DA Board based on ADS1256 on a Raspberry Pi 3b and the Python3 examples....
2
votes
1answer
45 views

Reading more than 8 bits from an SI7021 sensor

I am using the Si7021-A20 sensor on a Raspberry Pi Zero WH (headless, controlled via ssh and VNC). I want to get readings using Python (version 3). However, I have a very hard time to actually get ...
2
votes
0answers
27 views

Pin Crosstalk Issue [closed]

I'm working on a quick project with my dad for his condo. He wanted to setup a bunch of moisture sensors around the condo near sources of water (sinks, bathtubs, toilets, etc), which, if triggered, ...
2
votes
0answers
39 views

How to run 3 Input scripts from 1 script

I've got an alarm system with 3 inputs and 3 outputs. But so far each input is controlling the outputs from it's own script. I did this because I wanted to get one thing at a time working on its own. ...
2
votes
1answer
155 views

Pigpio not calling Callback for first rising or falling edge

I have some sample code (taken out of my larger program) that regularly (but not always) missing the first rising edge: #!/usr/bin/python import pigpio, time def callback(g, l, t): print("Callback ...
2
votes
0answers
66 views

Detecting “No Mouse Movement” in python on Raspberry Pi

So this is going to be a bit confusing but using a basic loop i can detect keyboard and mouse inputs using the following: globals()['keyboardEvent'] = evdev.InputDevice('/dev/input/event0') globals()...
2
votes
0answers
536 views

Difference between Thonny and Python 3 (running some code)

I'm just starting with the pi and to be more clear I'm spending time working with the Raspberry Pi Workshop for Beginners series on Youtube.To write an run code we use the Python 3 IDE but I don't ...
2
votes
2answers
1k views

How to I run OMXPlayer in windowed mode from Python?

When I run this program in Python 3 it is working but the video is in full-screen. from subprocess import run videoPath = "/home/pi/video_3.h264" omx = run(["omxplayer",videoPath]) As soon as I add ...
2
votes
2answers
1k views

GPIO event handler triggers off rising and falling edges

I'm trying to set up a tachometer. I used a comparator IC to get a real clean signal on pin 21 but I'm getting iterrupts on the rising AND falling edges. #!/usr/bin/python3 import time import ...