Questions tagged [raspbian]

DO NOT use this tag for new questions; Identify actual OS e.g. Raspberry Pi OS-Buster . Raspbian renamed Raspberry Pi OS (32-bit) is a family of GNU/Linux operating systems derived from Debian. Version numbering follows that of Debian and the current stable is 11 (Bullseye). Raspberry Pi OS is the most widely used Pi based distro.

Filter by
Sorted by
Tagged with
0 votes
0 answers
10 views

Raspi not using IPv6-Interface-ID defined in router settings

I'm trying to make my raspi available via dyndns over IPv6. I have the whole dyndns thing setup in my router and it works. When trying to make the raspi itself available I can open up ports in my ...
Daniel Waidele's user avatar
0 votes
1 answer
20 views

Synchronizing smartwatch data with microcontroller [closed]

I'm working on a microcontroller-based system that receive ECG signal from smartwatch in real-time, based on other data too like age and sex the system should give medical suggestions. I read about ...
user160633's user avatar
0 votes
1 answer
21 views

Problems With AutoConnections Wifi

I have a raspberry pi 4 with latest version of raspian and i want 2 things: 1 - static IP for eth0 port, so that I can guarantee access via ssh without any monitor. 2 - configure a wifi network via ...
FelipeFonsecabh's user avatar
0 votes
1 answer
22 views

Using SPI0 on Raspberry Pi for 3 to 4 slaves

I've been having troubles to use several readings using SPI on a raspberry pi 3B and I would like to get any solution, all my code is in python since everything then goes to a GUI So I have three ...
Ángel Navarro's user avatar
0 votes
0 answers
25 views

Raspberry pi is not showing on network/router's admin page

i have a raspberry pi 4b with raspbian bullseye 32 bit os , i was trying to connect it with a hidden network, pi is connected with the network but i can't see it in the "connected device " ...
Death Note's user avatar
0 votes
2 answers
58 views

How to Turn Off Red Idle LED Light on Raspberry Pi 4 When Device is Turned Off

On a Raspberry Pi 4, and I've noticed that the red idle LED light remains on even when the device is turned off. While I understand this might be a default behavior, I'm looking for a way to turn off ...
user3607022's user avatar
1 vote
0 answers
32 views

How to enable USB mode on Ubuntu Server installed on Raspberry Pi Zero W?

have installed Ubuntu Server on my Raspberry Pi Zero W and I'm trying to enable USB mode. I have edited the cmdline.txt and config.txt files as suggested, but upon booting, the USB mode is not working....
Prasaanth Sakthivel's user avatar
0 votes
0 answers
19 views

Unable to unbind/disable the built-in USB driver

i was trying to upload my custom USB driver to test it but the kernel calls it's built-in USB driver probe once pendrive is plugged in. 1)i cannot directly remove using the built-in drive functn. as ...
Udit's user avatar
  • 1
0 votes
0 answers
14 views

Send command to tty1 on startup

I've connected a Waveshare e-ink display to my Raspberry Pi 3B+ and installed PaperTTY. My idea is to run vim on the e-ink display and use it as a Freewrite-like device or a writerdeck. Basically, use ...
Javier de Pascual's user avatar
0 votes
0 answers
85 views

Getting v4l2rtspserver working on Raspian bookworm with High Resolution camera V1

I have installed v4l2rtspserver on raspian (bookworm) using snap: sudo apt update sudo apt install snapd sudo snap install core sudo snap install v412rtspserver The install went great, ...
Voltage Spike's user avatar
1 vote
1 answer
29 views

Dual 96kHz custom Microphone Recording

I'm working on a project that involves two custom analog microphones, each with a -2 to +2 volt analog output signal. My goal is to capture audio from these mics using a Raspberry Pi at a minimum ...
Neithard's user avatar
0 votes
0 answers
11 views

seedstudio reterminal not turning off after sudo reboot

I am using the seedstudio reterminal with cm4 to make a program that involves sht20 sensor. I encountered an error and found one solution in editing the “boot/config.txt” , by just adding some lines ...
arctic's user avatar
  • 1
0 votes
0 answers
80 views

Raspberry PI Serial Data Inconsistent

So I'm working on a GPS system which uses the UART on the Raspberry Pi to communicate with. Ths GPS Im using is a GNSS CLICK 7 from Mikroe combinded with the Pi 2. I have these commands run on startup,...
KrauseOlly's user avatar
0 votes
2 answers
192 views

newest raspbian missing wpa_supplicant.conf

With the newest raspbian running on a CM4, I am unable to find any SSID or passphrase in /etc/wpa_supplicant/wpa_supplicant.conf and thus am unable to change the wifi password by mounting the SD card ...
Daniel D.'s user avatar
0 votes
1 answer
111 views

What is the difference between “Raspbian” Bullseye and “Debian” Bullseye

Just ran “cat /etc/os-release’ on my two Pi 4Bs and noticed one uses Raspbian Bullseye and the other says Debian Bullseye. I used the same official Raspberry Pi imager but likely updated the imager in ...
Macuser's user avatar
  • 103
1 vote
0 answers
46 views

Can we build our own image of Raspberry Pi OS?

According to Raspberry Pi, Many operating systems are available for Raspberry Pi, including Raspberry Pi OS, our official supported operating system, and operating systems from other organisations. ...
Evan Carroll's user avatar
-1 votes
1 answer
33 views

PRi.GPIO works as normal user but for root ModuleNotFoundError

I am not a Linux specialist and would be glad if you could help me with this problem. Environment: Raspi 3b with Debian uname -a gives the following output: Linux MM3 6.1.21-v7+ #1642 SMP Mon Apr 3 17:...
Jens W.'s user avatar
-1 votes
2 answers
297 views

Raspberry PI 4 Solid Red and Green light

I just set up my Raspberry Pi with the Pi Imager and everything was working fine, suddenly the power cord was unplugged and I had installed an application, after that now I get the solid red and green ...
Shahbaz Malik's user avatar
0 votes
1 answer
108 views

External USB drive hangs whole system and randomly disconnects on raspberry pi

I have a raspberry pi which I use as a NAS with SAMBA. After I installed a brand new drive (480 GB Lexar SSD) into a Sata-To-USB adapter, the system acts weird (raspbian bullseye). When opening parted,...
Bellacoda's user avatar
0 votes
0 answers
23 views

Raspian continuously reboots after reaching autologin console

I'm a pretty experienced Raspberry Pi / Raspian / Raspberry OS user and can't figure this one out. Background: I started encountering this issue about a month ago on two varieties: RPi4 and RPiZero2. ...
jlcooke's user avatar
0 votes
0 answers
78 views

Help Needed with Keyboard Layout Toggling on Raspberry Pi 4B (Arabic/English)

Hello Raspberry Pi Community, I'm experiencing challenges in configuring my Raspberry Pi 4B to toggle between Arabic and English keyboard layouts. Despite numerous attempts with different methods, I ...
ManuG420's user avatar
-3 votes
1 answer
254 views

When will the latest Firefox be available on Raspbian?

2023-11-27_Mon_10:26:33 Hi, I am getting very tired of Firefox-ESR. It is simply NOT modern enough to keep up with many of today's websites. Examples: YouTube, Amazon, Google Maps, ... My main ...
Rhonda TS's user avatar
0 votes
0 answers
132 views

Pi Camera V2 not working

When I type the command vcgencmd get_camera, I get the following output: supported=0 detected=0, libcamera interfaces=0 And when I type the command libcamera-still -o test.jpg, I get the image ...
Kevin's user avatar
  • 1
0 votes
0 answers
88 views

ALSA issue with Raspberry Pi 4b and voice recognition

I get the following error, and it does not return the speech_recognition information: Expression 'GetExactSampleRate( hwParams, &defaultSr )' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: ...
Vector776's user avatar
0 votes
0 answers
55 views

.net8 Raspberry Pi Image

Is it too early to ask if there is an image of .net8 for Raspberry PI 2w I'm running IOT Module in .net7, and now want to upgrade and use .net8. I think however that isn't available yet -- looking ...
codeputer's user avatar
  • 123
0 votes
0 answers
34 views

raspberry pi 4 red and green light solid

current problem with raspberry pi 4 4GB, raspberry pi 4 red and green light solid - with SD Card plugged in - Raspian OS installed. When i use the SD Card recovery the green light turns off with the ...
Luke Frod's user avatar
0 votes
2 answers
865 views

How do I get the latest version of Raspberry Pi OS Buster for 4?

I am starting a project to create a digital photo frame and want to use pi3d for displaying photos. Pi3D is compatible with only Buster and not Bullseye or bookworm. I would like to get the latest ...
Nivas's user avatar
  • 103
0 votes
0 answers
14 views

Is it possible to bridge an IP created by a 4G modem merged with WWAN0 network with a virtual static IP?

Good afternoon, I have a Telit modem that was configured to generate an IP from an ISP to merge it with a WWAN0 network in the Raspberry Pi. However, it is working perfectly, but disadvantage of it is ...
Ahmed Bakry's user avatar
0 votes
0 answers
25 views

Issue with running multiple processes on a single webcam with Raspberry Pi 4

I have a Python program that utilizes threading to run multiple processes on a single webcam. The code works perfectly fine on my laptop, where it can run different processes simultaneously on one ...
JazzSlign's user avatar
10 votes
3 answers
5k views

Were CPU features removed on the Raspberry Pi 4 revision 1.5 board?

I have two Raspberry Pi 4s, both running Raspbian. One of them I just purchased this year and the other 2019. On the older board, running Buster with kernel 5.10, my /proc/cpuinfo reads: processor : ...
mmisiewicz's user avatar
0 votes
1 answer
47 views

Why My Spi Connection Is Not Getting started?

Hello Guys I Am New To Embedded & Rasberry PI. So In Order To Understand SPI Connection I Made An PI-PI SPI Setup PS. I am Using Two Rasbrry Pi Model 4 B with Raspi OS & i did the followings ...
Its_MEDev's user avatar
-1 votes
1 answer
43 views

Router does no connect to RPi 4 after restart

I shutdown the Pi running raspberian 64 lite with poweroff many times before and restarted it by un- and replugging without problems. After following this https://www.youtube.com/watch?v=RMW1Zi8MSas ...
MoritzMoreira's user avatar
0 votes
1 answer
109 views

Can't Install netperf on Bullseye

I am trying to install netperf on a RPi 4 with Raspbian 11 Bullseye I followed the directions from a previous post, netperf command doesn't exist on raspbian, but receive an error after make I ...
Jon H's user avatar
  • 3
0 votes
0 answers
166 views

Is it possible to enable an HSP/HFP profile in Raspian Bullseye?

I am running Raspian Bullseye (Debian 11) on a RaspberryPi 4b and would like to use my Apple AirPods as a 2-way headset. I've done lots of digging, followed this tutorial by Youness (https://youness....
for coder in woods's user avatar
0 votes
0 answers
36 views

Raspberry Pi Camera feedback freezes when moving NEMA 17 stepper motor with A4988 stepper motor driver

I have a Raspberry Pi with a camera module and a NEMA 17 stepper motor connected to it. When I run the command ffplay /dev/video0, the video runs perfectly. However, whilst the video is running, and I ...
Broteen Das's user avatar
0 votes
0 answers
53 views

Multiple first time start issues, including "Unable to mount root fs on unknown-block(179,2)"

So from what I have been googling, it sounds like it could be the SD card, but it is brand new and no other applications detect an error with it. Hopefully someone here can help me confirm. I bought a ...
Mac's user avatar
  • 101
1 vote
1 answer
71 views

Will the Netgear LM1200 4G LTE Modem work with the Raspberry Pi 4?

I'm working on a robot whose processing is all done in the cloud, and the raspberry pi only sends/receives/executes orders. For this reason, a way to have internet anywhere is needed, and I figured ...
Mito's user avatar
  • 129
0 votes
0 answers
289 views

Rapsberry Pi Camera v3 issues

I want to make a Rpi4 8GB livestream 2 camera feeds over 4G (SIM7600X module). One camera is a generic action cam and the other one is a PiCamera v3, which I have issues with. I'm running Raspbian ...
ch1kbr3_ 2307's user avatar
0 votes
1 answer
48 views

How to Access corrupted Raspberry Pi SD card using Ethernet Connection

I have Raspberry PI with Corrupted SD card, showing Kernel Panic Message, is there any way i can access it without removing SD card from SD card SLOT, raspberry pi is connected with Ethernet, which is ...
abhi's user avatar
  • 23
0 votes
0 answers
68 views

Reading Durations of signal train

I am receiving a signal train of alternate high low pulses and trying to read it on Raspberry Pi Zero W. I have enabled the one wire pin(GPIO-4) and used that pin to read the pulses. I am reading the ...
John Mist's user avatar
0 votes
0 answers
37 views

Executing a script before shutdown on RPi3b+ running Buster

I am looking at executing a script on a RPi3b+ with Raspbian Buster that is copying some files located on a ramdisk to a persistent folder located on the SD Card before a shutdown or a reboot of the ...
jfh999's user avatar
  • 1
0 votes
1 answer
88 views

My Raspberry Pi 4b changes password by itself

I am using Raspbian Bullseye on my Raspberry Pi 4b, and in the last few days it has been changing the password by itself. I have a headless setup, so I can only connect via SSH, and sometimes, several ...
mrRandom's user avatar
0 votes
1 answer
121 views

Has Raspbian for the armel architecture been discontinued?

I am developing an embedded application, and because of supply issues I'm looking at using the Raspberry Pi 0W v1.1, which is armv6, which is armel. The images available for download, even ones ...
Omar and Lorraine's user avatar
1 vote
1 answer
251 views

Raspbian: Visually Open Terminal Window and execute command after boot and login to desktop environment

Please god can someone help me. I've just spent the last 8 hours trying absolutely everything I can find online in every different way I can possibly think of and none of it works. Chron jobs cant ...
problemlow's user avatar
0 votes
0 answers
28 views

Hyperpixel 4 display runs apps vertically in landscape mode

I've got a Hyperpixel 4 display which, for some reason, is a vertical first display. I'd like to use it in landscape mode, with the Raspbian terminal-only mode. Here's what I did: I tweaked the /boot/...
blankblank's user avatar
0 votes
0 answers
46 views

missing config file and blocking scripts after sshguard installation

I am trying to install sshguard on Raspbian 9. The installation went fine. However, I can't find any default sshguard config, which should be in the /etc/sshguard/sshguard.conf file, and also the ...
Filip Rojek's user avatar
0 votes
0 answers
54 views

How can I use my Raspberry Pi as a Bluetooth sink with AVRCP protocol?

I've been searching the internet for two days now and have made several attempts to use my Raspberry Pi (Computemodule 4) as a Bluetooth sink with AVRCP protocol. Unfortunately, I have come to no real ...
Manuel Neff's user avatar
0 votes
1 answer
25 views

Latest Raspbian 10 Buster flashed onto 32gb micro sd card not booting Pi 1 Model B

Flashed using a 4gb sd card with slightly older release of the same buster os with dd, which itself boots fine on the same model B. But when I attempt to boot using the latest legacy buster lite os (...
citronic's user avatar
  • 101
0 votes
1 answer
38 views

VS 2022 Remote File Explorer

I'm trying to connect to my Raspberry PI directly from Visual Studio 2022, and I can't seem to get this new feature to work: I can easily connect to the PI over SSH, so I don't understand why this ...
codeputer's user avatar
  • 123
0 votes
0 answers
269 views

Yolo8 not working with Pi Camera Module 2

I am currently using Raspberry Pi 4 on Bullseye. I have connected the pi camera to the raspberry and when I test the camera with "libcamera-hello" it works, but when I want to use it locally ...
Kristian's user avatar

1
2 3 4 5
146