Questions tagged [raspicam]
The CSI interface camera from the Raspberry Pi Foundation available in a natural colour and a NoIR version without infrared filter, latter is suited for night vision and other special applications.
536
questions
0
votes
0
answers
25
views
Raspberry Pi Camera v2 not detected for Octopi on Raspberry Pi 3
I've searched all over the internet for a solution to my problem, but it seems like every route comes up short for me. Again, I am using a Raspberry Pi 3 with a Pi Cam v2, and using PuTTy as my SSH.
...
0
votes
0
answers
12
views
How to adjust Raspberry Pi 4B's v3 camera to make target full screen by tuning autofocus-window and lens-positiion parameters?
I am using Raspberry pi 4B's v3 camera to record teacher's teaching in classroom. I am using following two command to record h264 images and wav voice:
libcamera-vid -t 7200000 -o picture.h264
arecord ...
- 101
0
votes
0
answers
33
views
Rapsberry Pi Camera v3 issues
I want to make a Rpi4 8GB livestream 2 camera feeds over 4G (SIM7600X module). One camera is a generic action cam and the other one is a PiCamera v3, which I have issues with. I'm running Raspbian ...
0
votes
0
answers
32
views
PI camera is not working
Dear Raspberry Pi Community,
I am reaching out to seek insights into an issue I've encountered with the Raspberry Pi camera across three Raspberry Pi 4 (4GB) units, one of which was just recently ...
0
votes
0
answers
38
views
Very low fps when using Opencv
Relatively recently I started writing a project in which faces are detected through raspicam in python using opencv, but the result disappoints me, I get literally 5 fps, but if you remove face ...
- 1
0
votes
0
answers
10
views
How can i use picamera module 3 on google collab? i am using raspberry pi 4 b
I tried running it by inserting the camera capture code snippet in collab , but it is not detecting the pi camera
- 1
0
votes
1
answer
218
views
Picamera2 raw capture limited to 15 FPS
I have a Pi 4 with the High Quality Camera. I'm trying to capture raw frames with Picamera2 using the camera's 2028x1520 2x2 binning mode.
I'm using camera.sensor_modes[2], which says it has a maximum ...
- 111
0
votes
0
answers
36
views
How to handle shots with Picamera2?
I'm looking for code to handle shots with Picamera2.
I want:
Take photo with the camera
Show plan on screen for x seconds
Save photo as jpeg image.
I try the code below but can't find how to adjust ...
0
votes
0
answers
41
views
Trouble capturing images from a Raspberry Pi camera using Python
I am having trouble capturing images from a Raspberry Pi camera using Python. The following code works fine the first time, but fails to read data from the camera on subsequent attempts:
# shotFoto.py
...
- 1
0
votes
0
answers
264
views
Recording high-framerate video with libcamera-vid, camera module v3 and rpi 3B
UPDATE: According to this issue, it seems that 120fps with the camera module v3 is only possible with a RPI 4, so this kind of answer my question.
I'm not sure how to handle this case (self-answering ...
- 31
1
vote
1
answer
477
views
ENOSPC Error with Camera Module V3 on Raspberry Pi 3 B
I bought an Pi Camera Module 3. I have an Pi 3 Model B Rev 1.2.
I get the ENOSPC error when trying to use the camera with raspistill:
pi@raspberrypi:~ $ raspistill -o t.jpg
mmal: ...
- 23
2
votes
1
answer
73
views
Camera flash with Picamera2
Is it possible to have Picamera2 trigger a flash when taking a picture?
In an older version of my project I used a v2 camera module. I got flash working by creating a device overlay to define the ...
- 121
1
vote
1
answer
498
views
Raspberry pi camera module 3 works only on libcamera
I recently bought a Raspberry Pi 3b+ and Camera module v3. After days of troubleshooting, I got the camera to spit out images on the libcamera CLI. But, I can't create a picamera.PiCamera object in ...
- 113
2
votes
0
answers
38
views
Real time video processing in raspberry pi 2
Hi i am planning to do real time image processing using opencv python for a differential drive bot using raspberry pi 3 B, what are the factors do we need to consider(like video stabilization, etc...) ...
- 29
1
vote
1
answer
743
views
Raspi camera module V3 with Octopi
Recently purchased raspberry pi camera module 3 NOIR. My plan was to use it for octopi (octoprint), however, i tried my best but couldn’t make it work, and followed many of pages on net but no result (...
- 11
1
vote
0
answers
133
views
Rasberry Pi 3B+, PiCamera 1.3, Camera not detected
I have attached the ribbon cable from the Raspberry Pi CSI port to the Camera, and have ensured the connections are not loose.
I use the vcgencmd get_camera command and it returns:
supported=1 ...
- 11
1
vote
0
answers
28
views
Raspberry Pi cannot allocate memory for libcamera image [duplicate]
Good morning,
I am having some difficulties with the Raspberry Pi camera v2.1 I just received. My Raspberry Pi is a Pi 3 Model B v1.2. I am getting this error:
Unable to request 3 buffers: Cannot ...
- 29
1
vote
1
answer
39
views
What is the magnification of the stock lens used in Rpicam V2?
I'm trying to get the overall optical magnification of my digital microscope and wondered if the lens built in the Rpicam v2 has any magnification. Does anyone know this specification? Thanks!
1
vote
0
answers
88
views
Adding LUTs and film grain overlays to raspicam
learning python and such by coding and building a camera using the High Quality Camera. Being able to code physical inputs to control the various camera functions was a major win for me, so I don’t ...
- 119
0
votes
0
answers
85
views
Using Pi to check mipi clk?
I'm using the Pi 4 compute module to connect to a IMX219 camera using the mipi interface. Well, actually putting the mipi through a FPGA interface first but the basic question is:
Can I use the Pi to ...
- 121
0
votes
0
answers
349
views
unknown control 'rotate'
I have recently purchased a Raspberry Pi Camera Rev 1.3, and I'm trying to rotate it to 90 degrees, then its not able to rotate. Its just rotating it to 0 degrees or 180 degrees below is the command ...
2
votes
0
answers
64
views
HQ camera hanging after gpu_mem is increased
I just recently got a Raspberry Pi HQ camera and wanted to operate it using a python script.
I initially tried to take full resolution pictures using the default gpu_mem=128, but the program crashed ...
- 131
0
votes
0
answers
51
views
How to create a surveillance system using an IP camera?
I am completely new to this whole Raspberry Pi thing, but I would like to create a surveillance system with an IP camera. I have a Dahua Technology Model: DH-IPC-HDW1220SP camera that I connected with ...
0
votes
0
answers
53
views
HQ Camera shows artifacts / raindrops
A newly bought camera shows the following symptoms:
Pictures without an objective / without a lens show some unwanted artifacts:
Picture of the sensor surface / the green slice:
Picture (with an ...
- 101
1
vote
3
answers
11k
views
How to tell if the Pi Camera is connected?
Simple question, but searching did not return an answer.
I have a Pi4 and a Pi Camera. This camera is not USB and does not appear in lsusb output when it is working.
# lsusb
Bus 002 Device 001: ID ...
- 312
0
votes
0
answers
64
views
Raspberry Pi camera coding questions
I've been coding a little portable Pi camera using a Raspberry Pi Zero, the HQ camera module, and a WaveShare 1.44-inch screen. I've succeeded in programming a button to take a photo, and a button to ...
- 119
1
vote
0
answers
36
views
Raspberry pi HQ camera PNG capture taking a long time at full res
Does anyone know what factors the PNG capture takes a long time (16 seconds in well lit conditions and size 11MB) to capture at full sensor size (4056x3040) using the HQ camera?
Is it mostly ...
1
vote
1
answer
886
views
Motion terminating immediately
I have set up my Raspberry Pi 3 model B v2 and the Raspberry Pi camera module 2.1.
The camera works, I can take pictures with raspistill and access them via SSH. Querying the camera properties with ...
- 2,325
1
vote
1
answer
219
views
Raspberry Pi HQ camera exposure time jumps at 1 second
I am trying to build a timelapsing program in python, which analyzes the picture and determins the exposure, based on which it corrects it's shutter speed using a polynomial regression.
But I got ...
2
votes
0
answers
945
views
Motion exiting without any error (USB web camera)
I am trying to use Raspberry pi as a web camera streaming server. I am following this tutorial which uses Motion tool.
When I start the motion service, it exists without giving me an error and when I ...
- 123
1
vote
1
answer
2k
views
Pi Camera 1.3 not detected despite v4l2-ctl listing it
Before you say that I haven't searched the internet, whenever I type "pi camera not detected" I literally don't see a single unclicked result. I am slowly breaking apart.
PI 4 (8gb), V1.3 ...
0
votes
1
answer
1k
views
Missing raspistill
raspistill seems to be missing in 5.10.63+ kernel (raspibian), the only option is to use libcamera. Since I need the raspistill environment, how can I manually install it?
- 1
0
votes
0
answers
53
views
Why can I not use my picam v2?
pi@raspberrypi:~ $ raspistill -o test.jpg gives me the error below. I am trying to set up the camera with octoprint.
mmal: mmal_vc_component_enable: failed to enable component: ENOSPC
mmal: camera ...
- 1
0
votes
2
answers
265
views
How can I connect Rasberry Pi to internet via a 4G network?
I want to connect Rasberry Pi to internet via 4G network.
The idea of my project is to take a picture (or stream a video) with Rasberry Pi camera and send it to a distant cloud (say a Docker container)...
2
votes
0
answers
64
views
HQ Camera: Save as BMP file not working consistently
I've been working on a project using the HQ camera where I want to take a small bitmap image (100x100), do some analysis on the bmp file, and using that information determine whether that exposure ...
- 21
1
vote
1
answer
265
views
What's the minimum Raspberry Pi that can display the output from the Raspberry Pi camera at 30fps in real time?
Setup:
A Raspberry Pi of some kind (TBD depending on answers to this question)
A Raspberry Pi camera of some kind (TBD depending on answers to this question)
A 1080p television, that will be ...
- 111
0
votes
1
answer
3k
views
Turn old phone camera into raspberry pi camera
I don't really have the chance to get a raspberry pi camera. But I have tons of old phones and tons of phone cameras. Is there any way I can turn them into a camera that works with raspberry pi ?
- 11
0
votes
1
answer
41
views
Extending PiCam with CSI to HDMI issue
(Links to Amazon are not affiliated, or endorsed, but strictly to show the devices used)
I wanted to extend my PiCam distance from my RPI3B, and purchased a CSI-to-HDMI module ( https://www.amazon.com/...
- 123
0
votes
2
answers
761
views
Publish to iCloud from Raspberry Pi?
I'd like to use the Rasp Pi Camera to take a picture of my plant and then publish to my iCloud account.
Q: What is the best way to publish to iCloud from a Raspberry Pi?
Thank you.
- 101
0
votes
0
answers
83
views
NOIR Camera V2.1 not working in the dark
The camera used to work with pink shade in the morning and even in the dark without additional leds the last time used. I recently used it after a long time on a new system and noticed that it was ...
-1
votes
1
answer
179
views
Installing libjpeg62-dev for using modprobe bcm2835-v4l
I need to use the Raspberry Pi camera with OpenCV. For that, I have to run sudo modprobe bcm2835-v4l. But for that, I need to install it. I did it on another RPi a while ago, but I forgot the whole ...
- 93
0
votes
1
answer
1k
views
Raspberry Pi 3B+ XRDP Very Slow!
I have a Raspberry Pi 3B+ and I just installed xrdp on it. I wanted to do this so I can do some ROS projects. But just after using RDP to log in to the Pi, I was welcomed with a painfully slow desktop....
0
votes
0
answers
30
views
CM3+ and RaspiCam V2 issues
I'm trying to use two RaspiCam V2 with CM3+ and Computer Module 3+ Development Kit board.
I followed instructions provided in official links:
Raspberry Pi OS with desktop and recommended software
...
- 122
1
vote
0
answers
29
views
kiosk mode buster lite Pi Br2
I am trying to view my Octopi PiCam on a PiB2. I followed the guide here: https://die-antwort.eu/techblog/2017-12-setup-raspberry-pi-for-kiosk-mode/
Everything has went fine, no errors, no crashes. ...
- 43
2
votes
0
answers
230
views
Rpi Camera in ubuntu server 20.04 raspistill working, but python picamera and c++ raspicam not
I have been able to get the rpi camera v2 working on ubuntu server 20.04 (64bit) by using raspistill. However I am having trouble getting it to work with the python package picamera and the c++ ...
1
vote
1
answer
145
views
HQ Camera V4L2 - bad set of scene mode causes camera controls to become unresponsive
I have been playing with these cameras for some time using opencv/raspicam to control the camera. The raspicam/opencv interface allows setting the gain, this is dubious because there is no manual set ...
- 11
1
vote
0
answers
91
views
Can i stream camera to a remote server?
In my project i have to stream a low FPS and low-resolution live camera to an external server, because i am not able to port forward the pi's network.
Is it possible to set up a remote server and ...
- 11
0
votes
0
answers
281
views
Raspivid Overlay
I have been struggling for the past week to come up with a method to overlay text on a Raspivid preview. I have my raspberry pi connected via HDMI and simply want to overlay sensor data (in the form ...
0
votes
1
answer
339
views
Distorted Images from Raspberry Pi Camera Ubuntu 20.04
Hardware:
Raspberry Pi 4 Model B
Ubuntu 20.04 64-bit
Raspberry Pi Camera V2.1
I'm using OpenCV's VideoCapture to capture images using the Raspberry Pi camera module, as the picamera module isn't ...
- 1
0
votes
1
answer
133
views
Camera provides striped image - what's wrong?
I've been using the raspi cam for some time now.
I was using it inside a machine, to take photos from what's going on there.
As far as I can tell, the cables are all attached as they should be -
but ...
- 109